Sequentix Forum Reminder
2017-05-14 by colin@sequentix.com
If you signed up here looking for Cirklon chat, it's over at the Sequentix Forum... Just tumbleweed on Yahoo!Groups! now :) http://forum.sequentix.com
Messages
Browse messages
Page 1 of 168 · 8362 messages matched
mem expansion for P3
2016-05-25 by DH84@MSN.COM
So this has probably been gone over but, What does the mem expansion do as far as #s of sequences, etc???
Re: [analogue-sequencer] MIDI file dump/export to Cyrklon (from Cubase)? Possible?
2014-07-24 by Mitch Bryson
Yes, correct On Thursday, 24 July 2014, 17:54, "Bob bobdebobb@yahoo.com [analogue-sequencer]" wrote: I assume that I can, for example, play one Midi track from Cubase, put the Cyrklon to be slave and have'im record that track! And thereafter, to repeat the same for each track! Co
Re: [analogue-sequencer] MIDI file dump/export to Cyrklon (from Cubase)? Possible?
2014-07-24 by Bob
I assume that I can, for example, play one Midi track from Cubase, put the Cyrklon to be slave and have'im record that track! And thereafter, to repeat the same for each track! Correct? Sent from my iPhone > On Jul 24, 2014, at 7:46 PM, "Mitch Bryson acidmitch@yahoo.com [analogue
Re: [analogue-sequencer] MIDI file dump/export to Cyrklon (from Cubase)? Possible?
2014-07-24 by Mitch Bryson
No,you can't do that. There is no MIDI file import (or export) on Cirklon. You'd have to record thing's either in real time or up the tempo while recording and slow it back down to the original tempo when finished recording. On Thursday, 24 July 2014, 13:02, "bobdebobb@yahoo.com
MIDI file dump/export to Cyrklon (from Cubase)? Possible?
2014-07-24 by bobdebobb@yahoo.com
I intent to acquire a Cyrklon since hardware sequencers are (much) more reliable than software sequencers in LIVE performances. Before that, I have to make sure that I can dump/export MIDI files to Cyrclon. So, in consequence, I intent to use Cyrclon mainly for live performance s
Fw: Hi
2014-04-22 by vco3@aol.com
Hi! How are you? People say it works http://belskala.ru/gzvd/view.php vco3@aol.com
RE: Step Repeat function on the P3?
2014-03-05 by ferrograph@aol.com
not exactly the same, no... there is a repeat aux, but it squished the repeats into the same step-time. I'm tempted to experiment with the P3 a bit to see if this is possible... but I've also had to order one of the metropolis 185 clones myself (& presumably an unbearable wait!)
Step Repeat
2014-03-04 by Keith Sterling
My previous email should have read"step n times"
Step Repeat function on the P3?
2014-03-03 by Keith Sterling
The "step repeat" function on the Intellijel Metropolis, where a step can be repeated up to times is interesting. I haven't come across that on the P3, and I wonder if anyone has found a way to implement it through the creative use of Aux's? This hilarious video shows the step re
Re: P3 for sale
2014-03-01 by Lorne Hammond
Request that if possible private sales post final price so the forum stays current on value if people want to buy or sell. Keeping mine which so far went UK to South Africa to west coast Canada. Lovely bit of gear, feeding a mix of shruthi and vintage voices. Lorne
Re: P3 for sale
2014-02-28 by Gamall Backspin Promotions
I have a P3 for sale - it's got the wood sides I'm in NYC email me direct if you're interested g@backspinpromo.com analogue-sequencer@yahoogroups.com wrote: P3 and Cirklon hardware sequencers Group 1 Message Digest #1959 1a Re: p3 for sale? by "Enrico Fiocco" enricorib Message 1a
Re: [analogue-sequencer] p3 for sale?
2014-02-27 by Enrico Fiocco
Ciao mi sa che hai sbagliato indirizzo, ho già un p3 e non mi chiamo Emanuele.., Saluti Il 27/feb/2014 13:07 "tonylight" tonylight222@gmail.com > ha scritto: Ciao Emanuele Sono antonio di milano, ci eravamo sentiti un paio d'anni fa per il P3. Sei ancora interessato al P3? ne hai
Re: [analogue-sequencer] p3 for sale?
2014-02-27 by tonylight
Ciao Emanuele Sono antonio di milano, ci eravamo sentiti un paio d'anni fa per il P3. Sei ancora interessato al P3? ne hai già preso uno? Sarei pronto per venderlo dato che non lo uso mai ed è un peccato. Se vuoi ti mando delle foto? ciao Antonio 3357614260 tonylight222@gmail.com
Re: [analogue-sequencer] P3 for sale (soon)
2013-10-01 by jesús gollonet bailén
For anyone potentially interested, here are some pics I took this morning. http://www.flickr.com/photos/jesusgollonet/sets/72157636076511376/ On Oct 1, 2013, at 9:16 AM, jesús gollonet bailén wrote: Hi Keith. Thank you so much for your indications. The fix seems easy enough so I'
Re: [analogue-sequencer] P3 for sale (soon)
2013-10-01 by jesús gollonet bailén
Hi Keith. Thank you so much for your indications. The fix seems easy enough so I'll have a look over the weekend. Cheers, j On Sep 30, 2013, at 8:02 PM, Keith Sterling sterling.keith@yahoo.com > wrote: Hi Jesus. I had the same problem with my P3 where a key required extra pressur
Re: [analogue-sequencer] P3 for sale (soon)
2013-09-30 by Keith Sterling
Hi Jesus. I had the same problem with my P3 where a key required extra pressure to operate. I asked Colin about failure rates and replacements, and he informed me that he had never heard of a key switch malfunctioning, and that they are pretty tough. So I removed the key switch w
RE: Re: [analogue-sequencer] P3 for sale (soon)
2013-09-30 by roginator1@yahoo.com
I apologize .. I sent this to wrong mail address!! ---In analogue-sequencer@yahoogroups.com, wrote: hi man, i am interested un you P3. What is your price and the shipping cost for France? kind regard olivier Le 30 sept. 2013 à 10:16, jesús gollonet bailén listas@... > a écrit : H
Re: [analogue-sequencer] P3 for sale (soon)
2013-09-30 by Damir Rogina
ouuups .... wrong address!! Synthetic Arts Studio http://www.syntheticarts.com/o.com> To: "analogue-sequencer@yahoogroups.com" Sent: Monday, September 30, 2013 3:04 PM Subject: Re: [analogue-sequencer] P3 for sale (soon) I had few of them BTW i got more begrenzers specially GERMA
Re: [analogue-sequencer] P3 for sale (soon)
2013-09-30 by Damir Rogina
I had few of them BTW i got more begrenzers specially GERMANIUM one that is rare ... interested ???? Synthetic Arts Studio http://www.syntheticarts.com/ phone: 00 385 95 91 21 772 Skype & Facebook : Damir K Rogina http://www.discogs.com/artist/Damir+K.+Rogina ____________________
Re: [analogue-sequencer] P3 for sale (soon)
2013-09-30 by nomenklatur
hi man, i am interested un you P3. What is your price and the shipping cost for France? kind regard olivier Le 30 sept. 2013 à 10:16, jesús gollonet bailén a écrit : > Hi all! > I have a P3 which would get more use in other hands and I'm planning to sell it. > Prebuilt, no wooden
P3 for sale (soon)
2013-09-30 by jesús gollonet bailén
Hi all! I have a P3 which would get more use in other hands and I'm planning to sell it. Prebuilt, no wooden ends. The screen was replaced 3 years ago. It's in perfect aesthetic and working condition except for 2 keys (13, 14) which need extra pressure to function. I need to have
Re: [analogue-sequencer] P3 MIDI Sync late?
2013-09-19 by WT
Absolutely stunning sounds ! I knew I shouldn´t have watched that......I want one. Damn.... WT ----- Original Message ----- From: Keith Sterling To: analogue-sequencer@yahoogroups.com Sent: Thursday, September 19, 2013 8:43 PM Subject: Re: [analogue-sequencer] P3 MIDI Sync late?
Re: [analogue-sequencer] P3 MIDI Sync late?
2013-09-19 by Keith Sterling
Thanks for the replies, guys. WT's comments caused me to take a more scientific approach to the problem, by recording all the synths into Logic and comparing note start times. To make a long story short, after decreasing Logic's buffer from 1024 to 64 it became clear that the P3
RE: [analogue-sequencer] P3 MIDI Sync late?
2013-09-19 by Colin Fraser
> It seems to be about 20 milliseconds behind. 20 milliseconds would be 1 MIDI clock tick at 120bpm. Does the apparent delay vary with Logic's tempo ? I can't remember there being any MIDI clock bugs in P3, but it's possible there is a scenario in which the first tick is missed,
Re: [analogue-sequencer] P3 MIDI Sync late?
2013-09-19 by WT
What does the P3 sequence and how do you measure the offset 20ms? You wrote "it seems to be". WT 19 sep 2013 kl. 19:01 skrev Keith Sterling : > The clock also drives a Virus, Waldorf Xtk, Nord Lead 2, and Oberheim Cyclone. All of those are in perfect synch with the audio coming o
Re: [analogue-sequencer] P3 MIDI Sync late?
2013-09-19 by Keith Sterling
The clock also drives a Virus, Waldorf Xtk, Nord Lead 2, and Oberheim Cyclone. All of those are in perfect synch with the audio coming out of Logic, which is generating the midi clock via a Unitor8. From: WT So what's your other machines then ?
Re: [analogue-sequencer] P3 MIDI Sync late?
2013-09-19 by WT
So what's your other machines then ? WT 19 sep 2013 kl. 18:42 skrev : > Hi all, I have always run my P3 standalone. Now I am driving it with MIDI clock, and it is slightly behind all the other machines which are also being driven by the same clock. Has anyone else noticed this? I
P3 MIDI Sync late?
2013-09-19 by sterling.keith@yahoo.com
Hi all, I have always run my P3 standalone. Now I am driving it with MIDI clock, and it is slightly behind all the other machines which are also being driven by the same clock. Has anyone else noticed this? It seems to be about 20 milliseconds behind. I think it has to be somethi
RE: Zahir Manek
2013-06-19 by Zahir Manek
http://norden2.com/tcgb/czn/vovhp/aifzd.html?i=nyfq Best regards, Zahir Manek [Non-text portions of this message have been removed]
Good evening!
2013-06-16 by Mitch Bryson
How do you do?link: http://www.xn--ligasalteadefutbol-v0b.org.ar/asykewlrwk.html Mitch Bryson [Non-text portions of this message have been removed]
Re: P3 tools for sequentixP3
2013-06-14 by simon.carbo
Have Do you have any news about the update of p3tools?? Thanks Simon --- In analogue-sequencer@yahoogroups.com, Simon Carbonnel wrote: > > > Hello! > > > I send you this message because I have a problem with P3TOOLS (version 2). I can not copy normally bank on a site. It still la
Sunset District podcast with Sensitive Chaos & Suicide Lane
2013-06-11 by jimcombsus
The Sunset District podcast posted their interview with me (Sensitive Chaos) and frequent collaborator Christian Birk (Suicide Lane). We talk about electronic music, composing process, influences, and the Atlanta electronic scene. With a shout out to Colin and the P3, among other
Re: FS: P3
2013-03-18 by Olivier
hi Kirk, i am interested in your sequencer, how much is the shipping for France? Could i pay with paypal. Regards olivier --- In analogue-sequencer@yahoogroups.com, "octatrac" wrote: > > > > --- In analogue-sequencer@yahoogroups.com, "foodfeak" wrote: > > > > I have a factory bui
Re: FS: P3
2013-03-17 by octatrac
--- In analogue-sequencer@yahoogroups.com, "foodfeak" wrote: > > I have a factory built P3 for sale superb condition 100% working, comes with rack ears and manual looking for a UK sale. £600 plus shipping. > > Thanks Kirk >Hi Kirk interested in your P3 is it still available? wher
Re: Cirklon+tb
2013-02-21 by dario
Hi Colin. thank you for your answer. there is no choice for a man who loves his instruments. I think i'll take the midibass in the future.. thanks a lot --- In analogue-sequencer@yahoogroups.com, "Colin Fraser" wrote: > > > > That should work, but while this sounds like heresy th
RE: [analogue-sequencer] Re: Cirklon+tb
2013-02-21 by Colin Fraser
> That should work, but while this sounds like heresy the > cyclonix 303 clone is better, it speaks and sends midi in > native format. Lorne in Canada An original 303 equipped with a Sequentix MIDIBass 303 MIDI retrofit also sends and receives native MIDI, and was primarily desig
Re: Cirklon+tb
2013-02-21 by dario
thank you so much Peter for your answer. i'm sure that the cirklon, for my instruments and my settings, is one of the better choice for having real fun in writing crazy pattern..i hope that the sales of sequentix answer me soon. thank you again --- In analogue-sequencer@yahoogrou
Re: Cirklon+tb
2013-02-20 by Lorne Hammond
That should work, but while this sounds like heresy the cyclonix 303 clone is better, it speaks and sends midi in native format. Lorne in Canada [Non-text portions of this message have been removed]
Re: Cirklon+tb
2013-02-20 by stinkramp5a
yeah, you can do 303 style patterns easily (and *way* beyond). since you have the accent & slide inputs on your 303, you can set up the cirklon to ping those & get the same results as the builtin sequencer. the cirklon itself has various adjustable slide modes so you can use thos
Cirklon+tb
2013-02-19 by Dario
Hi guys. I'm a tb-303 owner and i have some questions about writing tb-303 sequences from cirklon sequencer. My tb is a cv gate kenton modified device, i have the midi control over cv, gate, filter, accent and slide. The converter is a kenton pro 2000. First of all i'd like to kn
FS: P3
2013-02-17 by foodfeak
I have a factory built P3 for sale superb condition 100% working, comes with rack ears and manual looking for a UK sale. £600 plus shipping. Thanks Kirk
Another BOB
2012-11-01 by b3stii
I have a Euro format modular and bought a 2nd run Cirklon that had a BOB w/o Eurorack connections. I heard that you are now offering these? Is there an option to get a kit and make it yourself? Preferably a rack version? Thanks
Re: P3 issue- please help...
2012-10-31 by duncan
well, without wanting to be rude about it, this is from the *manual*: "P3 is a pattern-based, 8 track hardware MIDI sequencer." that might go some way to explaining why "tracks" 9-16 don't seem to be transmitting midi data! I often use my two P3s on the higher numbered channels w
Re: P3 issue- please help...
2012-10-24 by Lorne Hammond
That was my point, you can only send 8 tracks on the midi ports. Nemo gives you two independent midi buses with 2 jacks each, the P3 has I think one bus with four jacks and din sync. The original inquiry is about why he can't send out 16 tracks, or the ones 9-16, after using 1-8.
Re: P3 issue- please help...
2012-10-23 by duncan
the eight tracks of the P3 can be freely assigned to any of the 16 midi channels. I often use two or more tracks on the same channel for switcheroo action. depending what version of the o/s you are running, the "part" switches (not to be confused with the banks) will select diffe
Re: P3 issue- please help...
2012-10-23 by Lorne Hammond
Uhm doesn't the p3 just transmit on track 1-8 and 9-16 are bank keys for different combos of 1-8? So the midi you set on tracks 9-16 go nowhere? Might be wrong, novice on p3 myself but that is how I use it. Lorne in canada [Non-text portions of this message have been removed]
Re: [analogue-sequencer] Re: P3 issue- please help...
2012-10-19 by Paul Nagle
On 19/10/2012 19:21, sunilsolanki@rogers.com wrote: > Yes. > > I will set , for example channel 10 on the P3 and channel 10 on my sy22...- NADA! > > but the various channel assignments for the EMX1 all work! Very weird, have you some kind of MIDI monitor, perhaps MIDI Ox on the P
Re: [analogue-sequencer] P3 issue- please help...
2012-10-19 by Paul Nagle
On 19/10/2012 18:23, sunilsolanki@rogers.com wrote: > have made the move from 100% ITB to a fair bit (for me) on hardware. and wanting to make music with minimal computer drudgery... > > I always used my P3 with the 1 bit of hardware i had...really enjoyable...but now i have 4 bi
Re: P3 issue- please help...
2012-10-19 by sunilsolanki@rogers.com
Well the SY22 is my "controller" for my DAW and midi works just fine. SO it's not the cable or the synth! This is really hampering my pleasure of use with the P3! S. --- In analogue-sequencer@yahoogroups.com, Paul Nagle wrote: > > On 19/10/2012 19:21, sunilsolanki@... wrote: > >