Betr: Re: [Simmons Drums] replacement knobs for MTM
2009-11-12 by Berk Aarts
Count me in whenever a cheap crap SDX comes around :O) But serious, if anyone has a working 8:2, not to much (it s for a artproject)I m interested Berk PS: or
Messages
Browse messages
Page 76 of 172 · 8595 messages matched
Re: [Simmons Drums] replacement knobs for MTM
2009-11-12 by WT
I could use a few too..... WT ... From: jesper To: Sent: Thursday, November 12, 2009 1:50 PM
replacement knobs for MTM
2009-11-12 by jesper
Hi list, my MTM (and another arriving soon I hope) is missing a few sensitivity knobs. I tested the TMI dito but the shafts are too long. So... are there any
Reproduction Selector Pad bracket
2009-11-09 by Ed
Hey all. I ve posted a picture of the SDS7 Selector Pad bracket I recently had made in the Photos section. While cosmetically it s no work of art, it does
Pad piezo output
2009-11-08 by Susie
This is related to my previous thread, and maybe the bass drum thread, but I thought I d start a new one. I ve a basic incompatibility between my SDS1000m and
SDX for sale
2009-11-08 by Ed
http://losangeles.craigslist.org/lac/msg/1454008319.html
Re: bass drum problem
2009-11-04 by schwapj
I had this problem with all of my SDS9 pads at one time or another after a few months of use, and I think Jesper is right, or close to it. I found in each case
Re: [Simmons Drums] Re: Felony video featuring the Coleman Saunders head kit
2009-11-04 by jesper
OK, I admit, _I_ would kill for a set... almost. :) I d love to lay my hands on all the instruments in the Landscape video. The EDP keytar is a hot wanted
Re: Felony video featuring the Coleman Saunders head kit
2009-11-04 by superwolle70
I wouldn t since I am married and having my twins. Probably a good project to build my own head kit modelled by my kid s faces? The bassdrum might be a print
Re: [Simmons Drums] bass drum problem
2009-11-04 by jesper
... Do you get the same result if you move the pads around, i e trigger the bass from a standard tom for example? That the tapping works makes me wonder if the
Re: [Simmons Drums] Re: Felony video featuring the Coleman Saunders head kit
2009-11-04 by jesper
... It just proves I need to read my copy again. :) A good book and there isn t much else to get from Bob from those days BTW. His view is that he told all
bass drum problem
2009-11-03 by Rick Gerken
I have a set of SDS 9 s I bought new, years ago. I didn t use them for quite a long time, but when I powered them up the bass drum sounds like it has a fast
Re: Felony video featuring the Coleman Saunders head kit
2009-11-03 by Ed
Thanks for all the responses, gentlemen. It is much appreciated. And a response from Glyn Thomas = Awesome! Nice to see the President is still around to keep
Re: Felony video featuring the Coleman Saunders head kit
2009-11-03 by hexdrum
... My company SIMMONS USA sold the ONLY Head kit to come to the USA - to Talking Heads they were very fragile and did not travel well. Regards Glyn Thomas
Re: [Simmons Drums] Re: Felony video featuring the Coleman Saunders head kit
2009-11-03 by jesper
... My bad then... I thought that was ten custom kits. Not ten heads . Enjoy the video link though, if the rest is wrong. :) ... Lovely! :D -- electronically
Re: Felony video featuring the Coleman Saunders head kit
2009-11-02 by superwolle70
The Complete Simmons Drum Book says that 10 had kits had been built. Richard Burgess is supposed to have at least one of them. By the way: Baz Watts, former
Re: [Simmons Drums] Felony video featuring the Coleman Saunders head kit
2009-11-02 by jesper
... One... and that was also used in einstein a go-go by Landscape: http://www.youtube.com/watch?v=CZqUNEHYZgQ (1:37 and forward...) Also includes the rare
Felony video featuring the Coleman Saunders head kit
2009-11-02 by Ed
http://www.youtube.com/watch?v=Ax1ErjLIloo @ :24 and again at 1:08 check out the Coleman Saunders head kit. WOW! Any idea how many of these were made? Anybody
Re: [Simmons Drums] Re: there's always someone more crazy...
2009-11-02 by jesper
Send your thank to Thomas, he s with us on the list! :) At least he was until quite recently... -- electronically yours, jesper - -- --- ---- ----- ---- --- --
Re: there's always someone more crazy...
2009-11-02 by Ed
Holy shit! That is AWESOME! It s like the Noah s Ark of sweet-ass vintage gear. Nice find - thanks for sharing.
Re: there's always someone more crazy...
2009-11-01 by superwolle70
very very cool! I really appreciate people who do not just archive their gear but creativley work with it.
there's always someone more crazy...
2009-11-01 by jesper
Here s a few clips from our own Thomas studio. http://www.youtube.com/watch?v=jib4O6oFNpE His Music Aid SDS-V flashes past, but no clap traps in sight I
Re: [Simmons Drums] Re: sdx on Vemia
2009-10-31 by jesper
I thought that sounded light-weight too... -- electronically yours, jesper - -- --- ---- ----- ---- --- -- - www.electronic-obsession.se
Re: sdx on Vemia
2009-10-31 by superwolle70
22kg? I still feel my back from last weekend. I bet it is even twice as much. Ready for the next youtube video? http://www.youtube.com/watch?v=IdscARCmi2g
sdx on Vemia
2009-10-31 by jesper
http://www.spheremusic.com/Bargaindtl.asp?Item=6400 Apparently fully working with manuals and software etc. -- electronically yours, jesper - -- --- ---- -----
Re: [Simmons Drums] Mk1 pad output levels
2009-10-31 by the_green_dome
I thought the same, and was worried that my relatively modern SDS-800 pads (mk3 or mk4? - with the jack outputs) would not be able to trigger my SDSV. However
Re: [Simmons Drums] Mk1 pad output levels
2009-10-30 by Susie
Thanks for the replies. It sounds like I should be OK with the mk1 pads then. I d like one day to own a SDSV, so it will be a good investment. As to whether
Re: [Simmons Drums] Mk1 pad output levels
2009-10-29 by WT
... From: Michael Buchner To: Sent: Thursday, October 29, 2009 9:27 PM Subject: Re: [Simmons
Re: [Simmons Drums] Mk1 pad output levels
2009-10-29 by Michael Buchner
Indeed there is no difference in the piezos. The resistor is lowering the amplitude of the trigger to another range. I hear the question: Why this, you have
Re: [Simmons Drums] Mk1 pad output levels
2009-10-29 by jimstew37
I ve often wondered about that resistor myself, because I ve been hearing on this board and elsewhere, that only MK1 pads would work properly with SDSV. I was
Re: [Simmons Drums] Sibi Siebert on hybrid SDSV/SDX kit
2009-10-28 by jesper
... Very nice indeed! :D -- electronically yours, jesper - -- --- ---- ----- ---- --- -- - www.electronic-obsession.se www.myspace.com/machinepop
Re: [Simmons Drums] Sibi Siebert on hybrid SDSV/SDX kit
2009-10-27 by Patrice Jacquot
COOOOL ! ... [Non-text portions of this message have been removed]
Sibi Siebert on hybrid SDSV/SDX kit
2009-10-27 by superwolle70
I have just finished some video impressions of Sibi Siebert s performance at Ludwigsburger Trommeltage last Saturday. What you here is only SDX (sounds and
Re: [Simmons Drums] Mk1 pad output levels
2009-10-26 by windsurfinsusie
OK, I ve double checked my kit: The mid-tom issue is indeed the SDS1000m. It was in fact a noisy pot. I thought the problem would be the sensitivity pot, but
Re: [Simmons Drums] Mk1 pad output levels
2009-10-26 by jesper
... XLR and metal rims + shiny plastic surface are the first. Let us know about the rest and we ll sort it out. :D -- electronically yours, jesper - -- ---
Re: [Simmons Drums] Mk1 pad output levels
2009-10-26 by Michael Buchner
But you know of the internal 1kohm resistor in the MK1 Pad, do you? The pads have much more output if you remove this. It is soldered to the XLR output socket,
Re: [Simmons Drums] Mk1 pad output levels
2009-10-26 by windsurfinsusie
I ll check tonight, but I think both Simmons pads were the same on the mid tom. My original conclusion was that the Simmons pads had a lower output than my DIY
Re: [Simmons Drums] Mk1 pad output levels
2009-10-26 by jesper
Have you tried switching pads around? It may sound obvious but isn t all clear in your post. I e, plug a working tom into the mid tom input of the brain. That
Mk1 pad output levels
2009-10-26 by windsurfinsusie
Is there a noticeable difference in output levels of different versions of hex pads? I have an SDS1000m which works great with some home made pads with piezo
Re: [Simmons Drums] Re: Simmonsmuseum blog
2009-10-26 by Patrice Jacquot
Well it depends what you mean by serious...but pretty sure yes ;-)... I met him then (98) a few times because of some problems on my SDX ... Bringing it from
Re: [Simmons Drums] Re: Simmonsmuseum blog
2009-10-26 by Patrice Jacquot
By the Way ... cooool ! ;-) ... [Non-text portions of this message have been removed]
[Simmons Drums] Re: Simmonsmuseum blog
2009-10-26 by superwolle70
Probaly it still shrugged a bit in 1998 but are you sure that there was still serious business and production going on in 1998?
Re: Simmonsmuseum blog
2009-10-26 by superwolle70
Thanks! By the way: This weekend was the reincarnation of a dinosaur: The SDX made it back on stage at the Ludwigsburger Trommeltage , famous drum event in
Re: [Simmons Drums] Re: Simmonsmuseum blog
2009-10-26 by Patrice Jacquot
By the way ... Simmons ( Sound Unit ) closed in 98 not in 95 !!! ... [Non-text portions of this message have been removed]
Re: Simmonsmuseum blog
2009-10-26 by emuxl7
cool blog and some great pics!
thomann and the fake simmons
2009-10-26 by jesper
Has anyone heard from them? I know a few of us wrote Qs to the people at thomann, but I haven t heard anything yet. Anyone else with a response in the inbox?
Synare Bassdrum
2009-10-22 by superwolle70
Hi group, if somebody is interested, send me an email and I can give you the seller s email adress. The price will be around 250 Euro Wolfgang
Re: [Simmons Drums] Simmons memory cartridge pictures
2009-10-16 by WT
Perfect ! WT ... From: Ed To: Sent: Friday, October 16, 2009 10:53 PM Subject: [Simmons Drums] Simmons
Simmons memory cartridge pictures
2009-10-16 by Ed
If you ve ever wondered what s inside a memory cartridge, I posted a few pictures in the Photos section.
Simmons SDS-V presets
2009-10-16 by paolobarre
Hi all. Is it possible to have the knob positions on a SDS-V drum-module relatively to the 4 factory presets? I d like to reply them on an DrumX Pearl drum