Re: [Simmons Drums] SDS-9 repair
2014-01-20 by jesper
... Ever been inside a Roland SH-101? 32 screws on such a basic synth. ;) And I think both the SDS-III and SDS-IV are a delight to get into. They even stand
Messages
Browse messages
Page 21 of 173 · 8603 messages matched
Re: [Simmons Drums] Looking for SDS knob caps
2014-01-18 by Phil a
Actually I m also missing a light grey knob cap (Mic. Sensitivity knob) and a white plastic glove on the Overall Pitch slider of my SDS-3. In case someone
SDS-9 repair
2014-01-16 by Malte Rogacki
Hi everyone; I recently aquired an SDS-9 in defective state. Apart from two broken pots it appears to crash its software frequently (it only starts up on
Re: Looking for SDS knob caps
2014-01-16 by scott@...
I tried & came up empty-handed with Mouser, Jameco and also Conrad (who only ship inside the EU, but I ve had success with them before where my USA sources
Re: [Simmons Drums] Looking for SDS knob caps
2014-01-16 by Phil a
Hi Group, Speaking of missing parts I would need 1 knob cap for the knob of a SDS-V module and 1 knob cap for the knob of a SDS-7 module. (maybe you have one
Re: [Simmons Drums] Looking for SDS knob caps
2014-01-15 by Nick Zampiello
have you tried jameco or mouser that sells instrumentation parts? if you measure one of th caps you have you may be able to find direct replacements...
Re: [Simmons Drums] Looking for SDS knob caps
2014-01-15 by Ed
I only have SDSV/7 era stuff. :(
Re: [Simmons Drums] Looking for SDS knob caps
2014-01-13 by jesper
I think Ed s sets are just for the mentioned gear. Ed? can you confirm? I d check for Cliff knobs... -- electronically yours, jesper - -- --- ---- ----- ----
Re: [Simmons Drums] Looking for SDS knob caps
2014-01-13 by Nick Zampiello
contact ed rose: here is his ebay listing: http://www.ebay.ie/itm/SIMMONS-DRUM-KNOB-CAPS-SDSV-SDS5-SDS6-SDS7-SPM-DIGITAL-CLAP-TRAP-/141090635302 z NEW
Looking for SDS knob caps
2014-01-13 by <scott@...>
I recently scored an SDS800 in near-mint condition, which I picked up to replace my old one which - although working 100% - has some spots of corrosion and
Re: [Simmons Drums] Happy New Year
2013-12-31 by Nick Zampiello
de de, de de, de dew, dew dew, dew dew dew! happy New Year! NEW ALLIANCE EAST!!!! ... New Alliance East - Mastering New Alliance East - Facebook X :::: B
Re: [Simmons Drums] Happy New Year
2013-12-31 by Arto Tyrni
Happy New Year to all!! fox from Da Far North http://www.lehmo.com/fox/lataamo/Simmons10-12.jpg
Happy New Year
2013-12-31 by <philmurr@...>
Well a Happy New Year to all Simmons enthusiasts across the world...I hope 2014 is a good year for all of your kits... I ve a busy year ahead, currently lined
RE: Musicaid Claptrap schematics
2013-12-29 by <gushi1@...>
More pics on a French Simmons Facebook page: https://www.facebook.com/vintagesimmonsdrum?hc_location=stream
SDX on ebay (UK)
2013-12-28 by <philmurr@...>
Advert says it s ex-Nick Mason from Pink Floyd. Starting price £3,000... Advert says it s ex-Nick Mason from Pink Floyd. Starting price £3,000...
Re: [Simmons Drums] SDS9 with other pads?
2013-12-25 by Michael Buchner
Hello Sam, seasons greetings. The pad with the grey O inlay is the snare pad. It contains 2 piezos for rim and head. Use a stereo jack (like on headphones)
SDS9 with other pads?
2013-12-24 by Sam Zehr
Hi all, Happy holidays I bought an SDS9 off eBay as part of a package deal, and with some help from you all, it appears to be working now. The unit came with a
RE: Yellow SDS9 Bass Drum Shell
2013-12-19 by <music@...>
Still looking..... I painted a white shell with yellow plastic grade paint and it looks.... well, it looks painted. I d LOVE to find and buy an original
Re: Re : [Simmons Drums] Extra Trixer inp ut
2013-12-17 by <philmurr@...>
It s a footswitch socket for remote up/down switching of kits Other details of the Trixer 1 - 2 upgrade... Number of factory preset kits increased from 4 to 8
Re: Re : [Simmons Drums] Extra Trixer inp ut
2013-12-17 by jesper
Ah. a foot switch. For what? Program changing?
Re: Re : [Simmons Drums] Extra Trixer inp ut
2013-12-17 by <philmurr@...>
This is probably the Trixer 2 upgrade. My Trixer had the extra socket (unlabelled) and when I checked, it had all the other features of the Trixer 2. My
Re: Re : [Simmons Drums] Extra Trixer inp ut
2013-12-17 by jesper
Found out it s not for audio in... (tested it, with care). No picture to show (yet) and haven t checked the inside either. -- electronically yours, jesper - --
Re : [Simmons Drums] Extra Trixer input
2013-12-17 by Jacquot.Patrice@...
Hi Jesper , would you have any pic of it ? I think everything s possible with Dave. He would (& did) operate many mods that people would ask for... Patrice.
Extra Trixer input
2013-12-17 by jesper
Hi list, earlier this year I bought a cheap Trixer mostly because my kids missed the Seabro brain that I d moved into my studio. I left the Seabro set was
Simmons SDS800 for sale
2013-12-16 by <philbanksdj@...>
Hi I m selling a SDS800 drum brain if anyone s interested? send a message to my email address many thanks Phil
Re: [Simmons Drums] Musicaid Claptrap schematics
2013-12-16 by Michael Buchner
Thank you for the info! Great! I hope, they have some in stock. I will try to get some, when my holidays are over. May be they sell some CA3080 too... ...
Re: [Simmons Drums] Musicaid Claptrap schematics
2013-12-16 by jesper
That I m looking for? Yes! -- electronically yours, jesper - -- --- ---- ----- ---- --- -- - www.electronic-obsession.se
Re: [Simmons Drums] Musicaid Claptrap schematics
2013-12-16 by <philmurr@...>
Is that one that looks like an old grey keyboard switch ?
Re: [Simmons Drums] Musicaid Claptrap schematics
2013-12-16 by jesper
I could use a button for mark 2. ;) -- electronically yours, jesper - -- --- ---- ----- ---- --- -- - www.electronic-obsession.se
Re: [Simmons Drums] Musicaid Claptrap schematics
2013-12-16 by WT
I could use the MK1 schematics :) WT
Re: [Simmons Drums] Musicaid Claptrap schematics
2013-12-16 by Dennis Matana
15 euro for an LM566? http://www.futurlec.com/Linear/LM566CNpr.shtml $ 1,25 a piece (Y) http://soundcloud.com/wifi www.facebook.com/matanateknik
Re: [Simmons Drums] Musicaid Claptrap schematics
2013-12-16 by chris@chriswareham.net
On 16 December 2013 at 03:13 Michael Buchner ... There s an interesting thread on the Electro Music forum that suggests the
RE: Prototype Clap Trap rack?
2013-12-16 by <superwolle70@...>
The Clap Track rack version has been built about 5 times, so it is neither a rip-off nor a prototype. It s official Musicaid
Re: [Simmons Drums] Musicaid Claptrap schematics
2013-12-16 by Michael Buchner
This is the schematics of the Mark 2 (analogue Simmons ClapTrap), the humaniser is already built in. It was a great idea to use the AC frequency from the PSU
Re: [Simmons Drums] Musicaid Claptrap schematics
2013-12-15 by WT
... From: Chris Wareham To: Sent: Sunday, December 15, 2013 10:30 PM Subject: Re: [Simmons Drums]
Re: [Simmons Drums] RE: Prototype Clap Trap rack?
2013-12-15 by Chris Wareham
... Wow! I guess that must make it one of the rarest Musicaid/Simmons devices around. I really must upload some tracks I ve been working on with my Clap Trap.
Re: [Simmons Drums] Musicaid Claptrap schematics
2013-12-15 by Chris Wareham
... Hi! I ve uploaded the schematic to the existing Analog Claptrap directory in the files section of the Yahoo group. I ll quote below the description that
RE: Prototype Clap Trap rack?
2013-12-15 by <superwolle70@...>
The rack version of this Clap Trap is neither a fake nor a custom built version. About 5 of those particular devices have been built at Musicaid
Re: [Simmons Drums] Musicaid Claptrap schematics
2013-12-15 by WT
Cool ! Can you scan it and upload it ? WT ... From: To: Sent: Saturday, December 14, 2013 4:37 PM
Re: [Simmons Drums] Musicaid Claptrap schematics
2013-12-14 by chris@chriswareham.net
... I have a schematic, although it lacks enough information to identify some of the IC s. I was planning on cross referencing it with the internals of my Clap
Musicaid Claptrap schematics
2013-12-13 by WT
Speaking of the Claptrap, I could use the schematics if someone has them ? WT
Re: [Simmons Drums] RE: Prototype Clap Trap rack?
2013-12-13 by Chris Cronin
Looks like it was made using SDS3/SDS4 parts. It has the serial number sticker and it looks legit to me. I could be wrong of course as I ve never seen one like
Re: [Simmons Drums] RE: Prototype Clap Trap rack?
2013-12-13 by chris@chriswareham.net
On 13 December 2013 at 09:24 Thomas Heckmann ... That was my guess as well. I ve seen plenty of stuff that s been racked for more
Re: [Simmons Drums] RE: Prototype Clap Trap rack?
2013-12-13 by Thomas Heckmann
Not me ;-) Thomas P. Heckmann troperecordings - afu limited - afulab - trope mastering
Re: [Simmons Drums] RE: Prototype Clap Trap rack?
2013-12-13 by jesper
Wow guys, who joined the bid war? Last time I looked it cost 1.60. Now it just passed 400 pounds! I sure hope it s the real deal inside. Many manufacturers
Re: [Simmons Drums] RE: Prototype Clap Trap rack?
2013-12-13 by Thomas Heckmann
I guess it s just someone s regular Claptrap that was racked for touring back in the days. Could ve been done by Musicaid though and looks well done :-) Thomas
Re: [Simmons Drums] RE: Prototype Clap Trap rack?
2013-12-13 by jesper
*remembering the bogus SDS-2 I used to own* But I agree on the rest, it looks correct based on what can be saif about the exterior. -- electronically yours,
RE: Prototype Clap Trap rack?
2013-12-13 by <philmurr@...>
Very interesting item. And looks genuine too, the knobs are the right ones, the sticker on the back is correct, and the typed label showing how to trigger
Prototype Clap Trap rack?
2013-12-12 by Chris Wareham
Hi folks, There s a seller on eBay who is selling what he believes to be a prototype of a rack mounted analogue Musicaid Clap Trap:
RE: SDS9 repair questions
2013-12-11 by <samzehr@...>
Thanks jabba (and everyone else) Well, any schematics would be helpful - I had more wanted them to know what cap values to order, although (see below) I would