Simmons SPM 8:2
2014-02-27 by Sandy
Hi Guys! Does anyone have a schematic for the Simmons SPM 8:2, or know someplace I can obtain a copy. Goodwill, Luke
Messages
Browse messages
Page 20 of 173 · 8603 messages matched
Re: [Simmons Drums] SDS7 Program Selector Pad issues
2014-02-27 by Michael Buchner
It is corroded tracks on the FSR, very often where the foil slides into the edge connector. Or, at that point, the FSR foil was bent too strong. Sometimes the
Re: [Simmons Drums] SDS7 Program Selector Pad issues
2014-02-27 by jesper
... I have two and have seen the inside... I deem the selector pad to be the crappiest Simmons product ever as far as hardware goes. A thing you re meant to
Re: [Simmons Drums] Making EPROMs for Drumtraks with my EPB?
2014-02-27 by Thomas Heckmann
Hi Chris, for swapping of the two EPROM versions I use my Oberheim Prommer. And for the others I use a very old PC Laptop to archive EPROMs (I m on Mac
SDS7 Program Selector Pad issues
2014-02-27 by <music@...>
Hi Everyone... I have an SDS7 Selector Pad that until recently was working flawlessly. Now, when pressed or tapped, several of the 16 pad buttons on the thing
Re: [Simmons Drums] RE: Making EPROMs for Drumtraks with my EPB?
2014-02-27 by Chris Cronin
Great video! I ll check Simmonsmuseum now. Thanks. On Thursday, 27 February 2014, 15:59, alfpaches@yahoo.es wrote: Hi I shared this
RE: Making EPROMs for Drumtraks with my EPB?
2014-02-27 by <alfpaches@...>
Hi I shared this vidio about EPB on YOUTUBE. http://www.youtube.com/watch?v=6cV9jp2oYkQ http://www.youtube.com/watch?v=6cV9jp2oYkQ You can also read Micha´s
Re: [Simmons Drums] Making EPROMs for Drumtraks with my EPB?
2014-02-27 by <gushi1@...>
Thanks Thomas. So the EPB was only good for Simmons products then? (SDS7, SDS9, SDS1?). I have two SDS7 s (both not working) and and SDS9 so I think I ll hold
Re: [Simmons Drums] Making EPROMs for Drumtraks with my EPB?
2014-02-27 by Thomas Heckmann
Hi Chris, Simmons uses the Linear Format for EPROMs, which is not compatible with your Drumtraks. You would need an Oberheim Prommer (can do both and swap as
Making EPROMs for Drumtraks with my EPB?
2014-02-27 by <gushi1@...>
Hi guys. I recently acquired a SCI Drumtraks. My thinking was that I would be able to use my Simmons EPB to make my own EPROMs. Can anyone give me any advice
SDS9 low volume Hi & Low toms
2014-02-22 by <realmsteel@...>
I bought this SDS9 set a long time ago and am finally getting it integrated into my acoustic set. In November 2012, I replaced the battery and Program
RE: Rebuilding SDX power supply
2014-02-17 by <edrose1@...>
I don t have it yet, Phil. Just trying to get things in order for its arrival. The seller was testing it (since it d been in hibernation for over a decade) and
RE: Rebuilding SDX power supply
2014-02-17 by <philmurr@...>
Hi Ed - really depends what the fault is. The + and - 15V are quite simple regulator circuits, but the 12V and 5V supplies are quite complicated. There s a
Re: [Simmons Drums] RE: A cheap solution to adapt a modern hi hat pedal to use with SDS7 and SDSV
2014-02-17 by ALFONSO PACHES
Hi Ed! Glad you liked the demo I did. Micha has done an excellent job. He shared in the WEB the way to do it . Here you can see it:
Rebuilding SDX power supply
2014-02-17 by <edrose1@...>
Hey all. I understand that the PSU on the SDX is a common problem. Have any of you had any luck rebuilding them or is it better to just buy a new one? I know
RE: A cheap solution to adapt a modern hi hat pedal to use with SDS7 and SDSV
2014-02-17 by <edrose1@...>
Awesome! Michael, would you mind posting a write up for this?
A cheap solution to adapt a modern hi hat pedal to use with SDS7 and SDSV
2014-02-16 by <alfpaches@...>
For all the Simmons fans. (All of us, obviously) Are you tired of looking for a hi hat pedal for your SDS7 or SDSV on EBAY (and for a crazy prices)?. Here you
RE: [AH] Simmons SDSV refurbish part three!
2014-02-15 by <alfpaches@...>
Absolutely amazing!. Congatulations , Nick.
Re : Re: [Simmons Drums] RE: [AH] Simmons SDSV refurbish part three!
2014-02-15 by Jacquot.Patrice@...
What a beautiful restoration Nick !! Respect & congrats. ... De: Nick Zampiello À: Simmons Drums ,
Re: [Simmons Drums] RE: [AH] Simmons SDSV refurbish part three!
2014-02-14 by Nick Zampiello
thanks everybody! NEW ALLIANCE EAST!!!! ... New Alliance East - Mastering New Alliance East - Facebook X :::: B :::: S On Thursday, February 13, 2014
RE: [AH] Simmons SDSV refurbish part three!
2014-02-13 by <edrose1@...>
Nice work, Nick! Love the addition of the sequencer. Black knob caps and panel screws look tough as nails! Well done.
Re : Re: [Simmons Drums] RE: W hat is Dave Simmons up to now?
2014-02-13 by Jacquot.Patrice@...
It would be very interesting as having recently played my brother s Roland electronic kit, the current state of the art seems to be a much more affordable but
Re: [Simmons Drums] RE: What is Dave Simmons up to now?
2014-02-13 by jesper
I think the UK rights in a way had effect throughout Europe since we re one market these days. It sure helped get the plastic crap off the german online stores
Re: [Simmons Drums] RE: What is Dave Simmons up to now?
2014-02-12 by Chris Wareham
... I ve just been reading up on the background to this, and the interview with Dave Simmons in Digital Drummer magazine is quite illuminating:
RE: What is Dave Simmons up to now?
2014-02-12 by Karl Sukhia
Ive heard he is in the nails biz now?? (like fingernails) Hard to imagine but interesting that he seems happy in such an unrelated industry if that is indeed
RE: What is Dave Simmons up to now?
2014-02-12 by <warlandr63@...>
From what I know, the win back only has credence in the UK. Guitar center was found under UK law not to have complied with the legislation thus they have no
Re: [AH] Simmons SDSV refurbish part three!
2014-02-12 by Nick Zampiello
good question. i ll look to make sure. i know it s the short style. NEW ALLIANCE EAST!!!! ... New Alliance East - Mastering New Alliance
[AH] Simmons SDSV refurbish part three!
2014-02-12 by Nick Zampiello
Thanks for the patience. here it is! z NEW ALLIANCE EAST!!!! ... New Alliance East - Mastering New Alliance East - Facebook X :::: B :::: S Thanks for the
Re: [Simmons Drums] RE: SDS7 question... "sometimes" no LED display on power up
2014-02-12 by Nick Zampiello
i ve used rubber washers from the hardware store as well. they work too! but i like the sticky art foam because it feels so macgyver! NEW ALLIANCE
What is Dave Simmons up to now?
2014-02-12 by <karlsukhia@...>
Does he have any plans to make new drums and did he win the name back from guitarcenter?? Just curious, figured someone here might know
RE: [Simmons Drums] RE: SDS7 question... "sometimes" no LED display on power up
2014-02-11 by <music@...>
Great, thanks Richard. Now to find good quality time to actually do this thing!! Alan From: Simmons_Drums@yahoogroups.com
RE: [Simmons Drums] RE: SDS7 question... "sometimes" no LED display on power up
2014-02-11 by <warlandr63@...>
Just wanted to concur that if the KIT display is not functioning AND all connections, pcb tracks pertaining to it are all ok, it will be either IC9 (74LS164 -
RE: [Simmons Drums] RE: SDS7 question... "sometimes" no LED display on power up
2014-02-10 by <music@...>
I was entertaining the idea of dismantling the knob assembly and sliding a small nylon washer onto the shaft to take up any gap space… but I like your idea
Re: [Simmons Drums] RE: SDS7 question... "sometimes" no LED display on power up
2014-02-10 by Nick Zampiello
sometimes it s as easy as adding a small bit of sticky foam to the underside of a knob to add some friction and keep it from jostling. z NEW ALLIANCE
RE: [Simmons Drums] RE: SDS7 question... "sometimes" no LED display on power up
2014-02-10 by <music@...>
Yes, thankfully they are socketed.. it’s a later model SDS7 with the black card slots on the backplane. As far as I can tell all other functions seem normal.
WTB: SDS 8
2014-02-10 by <pasitive@...>
Hi everyone, I m looking for Simmons SDS 8 brain, reasonable priced. If you have one for sale, please contact me. EU preferred. Location: Finland.
RE: SDS7 question... "sometimes" no LED display on power up
2014-02-08 by <philmurr@...>
Have you checked the pins of the unlit LED s with a logic probe - there should be no signal when unlit (of course :-)). Then work back from there to see
SDS7 question... "sometimes" no LED display on power up
2014-02-05 by <music@...>
Hi group.... Here s a baffling one... I have a fully functional SDS7 (Ser# 71163) with an intermittent issue... when powered ON, sometimes the Front 2 digit
shameless self-promotion - but On-Topic
2014-02-05 by jesper
Hi list, my band Angaudlinn is at it again. Here s the latest track featuring a pair of SDS-1 s at the beginning and plenty of other electronic drums scattered
Re: [AH] Simmons SDS V Repair part 2
2014-02-04 by Nick Zampiello
Getting there, wait till i do that last post with back together pics... ! I am so glad i was able to save it. and it all completely survived. NEW ALLIANCE
[AH] Simmons SDS V Repair part 2
2014-02-04 by Nick Zampiello
Part two of three parts! Simmons SDSV Part 2 z NEW ALLIANCE EAST!!!! ... New Alliance East - Mastering New Alliance East - Facebook X :::: B :::: S Part two
Re: SDX #131 Lives (sort of)
2014-01-27 by brucemason@sky.com
hello new owner of sdx #131. I have library and other things sdx which may be of interest. please write to beat-boy99@sky.com . thanks
RE: SDX #131 Lives (sort of)
2014-01-26 by <boxjunk123@...>
Hello, I only got the console unfortunately/fortunately.
RE: SDX #131 Lives (sort of)
2014-01-24 by <rob.mayo@...>
Hey Mark, did your SDX comes with pads or just the console? If you got pads are they all ZI ones and include the bass drum pad?
RE: SDX #131 Lives (sort of)
2014-01-24 by <rob.mayo@...>
Hey there Mark. Did your SDX come with pads or is it just the console? If you got pads with it, are they all ZI pads and do you have a full set including the
Simmons SDS V Refurb part 1
2014-01-24 by Nick Zampiello
hey gang. This is the first post on a complete refurb for an SDS V. it s sad but there is a happy ending! oh the dramas!
RE: Happy New Year
2014-01-23 by <boxjunk123@...>
Hi Phil, my names Mark. I just acquired SDX #131 in Japan. It needs help, but sound is coming out. I am going to tinker a bit here, but was wondering if ti is
SDX #131 Lives (sort of)
2014-01-23 by <boxjunk123@...>
Hello just acquired SDX #131 here in Japan. It needs some TLC, but i think she is still a goer. I am new to the simmons realm as I am I keyboard player. Still,
Re: [Simmons Drums] Simmons SDS5 for sale
2014-01-21 by jesper
... I would encourage you to name a price. I know that you have a good understanding of the value and the market. It s also easy to check Ebay for figures. --
Re: [Simmons Drums] SDS-9 repair
2014-01-21 by Nick Zampiello
I will add that the SDSV is great to work on if you never need to work on anything but the cards ! i had to save an enclosure last year and the boards were