Re: [Simmons Drums] RE: Re: Simmons carts update
2013-10-18 by Nick Zampiello
me too! haven t seen mine yet. looking forward! THANKS! z NEW ALLIANCE EAST!!!! ... New Alliance East - Mastering New Alliance East - Facebook X :::: B
Messages
Browse messages
Page 23 of 173 · 8603 messages matched
Re: [Simmons Drums] SDSV triggering issue
2013-10-18 by Nick Zampiello
there s also supposed to be a small tab inserted into the connector to make sure that the cards stay lined up with the edge connector vertically. these are
Re: [Simmons Drums] SDSV triggering issue
2013-10-18 by Michael Buchner
The problem is the so called edge connector, where the module slides into the connector of the backplane (I am talking about the white multipin connectors
SDSV on eBay UK
2013-10-18 by chris@chriswareham.net
Hi folks, There s an SDSV on eBay UK: http://www.ebay.co.uk/itm/331045450682 It was previously listed as a Buy it Now for 299GBP, but didn t sell and is now up
RE: RE: Minor issue with SDS8
2013-10-18 by <philmurr@...>
The hand-drawn ones ARE the factory schematics ! Only later on did they do lots of work using CAD, and even then there was still the hand-drawn stuff... ...
Moderator note: Sorry for the delays
2013-10-18 by jesper
Hi list, there s nothing wrong with the tech stuff (afaik) but I was abroad for a week and the combination of hectic work days, a crappy phone and Palestinian
RE: Re: Simmons carts update
2013-10-15 by <music@...>
Still waiting for mine... hope they arrive soon!!! ... I just want to say thanks - I received my card yesterday, it is a quality item, very professional work,
Put Simmons memory cart clone files in a folder
2013-10-15 by <warlandr63@...>
I ve put some schematics etc in the files section in a folder if people want copies to keep. I will eventually upload everything there. I ve had feedback from
Re: Simmons carts update
2013-10-14 by vout@...
I just want to say thanks - I received my card yesterday, it is a quality item, very professional work, well done. My SDS7 salutes you. Cheers, vout
Re: [Simmons Drums] Re: Simmons SDS 6 gate question
2013-10-14 by Nick Zampiello
awesome thanks for the info. i was able to get it to sync if i ran the sequencer clock from the Garfield DR Click into the preamp of the 2600 for a little
Re: Simmons SDS 6 gate question
2013-10-14 by vout@...
Hi, I was able to sync the SDS6 to a TR606 (tom) trigger output, it seems to have enough juice to drive the SDS6 even though the voltages are theoretically
RE: First lot of memory carts have been sent
2013-10-12 by <music@...>
Hello? Anybody there? Are my posts not coming through? ... Hi group, I have sent out the first batch of orders last week to those who responded to my earlier
RE: SDC 200 amplifier on ebay UK
2013-10-12 by <superwolle70@...>
Accidently I have the missing part, the amplifier. If somebody is interested in combining both sections to a working unit: Send me an email ... Can you see
SDC 200 amplifier on ebay UK
2013-10-12 by <philmurr@...>
Can you see what s missing ? http://www.ebay.co.uk/itm/Simmons-SDC-200-Watt-monitor-speaker-in-cabinet-/231072397504
RE: Simmons carts update
2013-10-11 by <music@...>
Hi Richard.... I have not received mine yet. Do you have a tracking number you can email me to I can trace the shipment? Thanks Alan - Teknik14 ... All members
RE: Minor issue with SDS8
2013-10-11 by <jeff.mucciolo@...>
Hey there! Unfortunately, I don t have an answer to your problem. But I notice you mentioned that you have a factory schematic for your SDS8. Would you be
SDSV triggering issue
2013-10-11 by <mimountains@...>
Hi everyone. I recently took my SDSV on the road for a month. It was great, but I started noticing a particular issue started happening: Basically - when I
RE: New member introduction
2013-10-11 by <texbluesgirl@...>
I thought your name looked familiar. I just bought The Complete Simmons Drum Book from you. Thanks again.
RE: A revamped Complete Simmons Drum Book is waiting to be released
2013-10-11 by <texbluesgirl@...>
I hope it not just an e-book but a real hard cover or paperback book.
RE: Henrit's drum book on Ebay
2013-10-11 by <texbluesgirl@...>
I just bought one off eBay. It s not mint but still in good condition. Im only half way through it. I would love it if Dave Simmons himself wrote a book on his
Re: [Simmons Drums] Simmons carts update
2013-10-10 by Nick Zampiello
awesome thanks! the mem expansion carts are the same for SDS 6 and SDS7 right? z NEW ALLIANCE EAST!!!! ... New Alliance East - Mastering New Alliance
Simmons carts update
2013-10-10 by <warlandr63@...>
All members who have have contacted me and provided there postage have had their requested carts sent as of today. I tried to post an update a couple of times
clap trap FS in Sweden
2013-10-06 by jesper
Hi list, this surfaced again: http://vend.se/ad.php?191593 It seems to be the one for sale at jam.se earlier this year. -- electronically yours, jesper - --
FOR SALE Simmons SDS 400 and 1 Black pad. Free loom.
2013-10-06 by <jason@...>
Hi all, for anyone looking to join this fine sounding community or add to their current Simmons collections I ve just listed my SDS400 and one pad on ebay.
Simmons SDS 6 gate question
2013-10-05 by Nick Zampiello
hello! so i am trying to get a simmons sds 6 to chase a clock pulse and i can t get it to play... i see that it expects 15 volts. this is a lot... but i am
Re: [Simmons Drums] RE: Simmons SDS6 power question
2013-10-02 by Nick Zampiello
thanks for all the help! NEW ALLIANCE EAST!!!! ... New Alliance East - Mastering New Alliance East - Facebook X :::: B :::: S
Re: [Simmons Drums] RE: Simmons SDS6 power question
2013-10-02 by Michael Buchner
Cool! Von meinem iPhone gesendet ... Cool! Von meinem iPhone gesendet Am 02.10.2013 um 03:55 schrieb Nick Zampiello : i got it
Re: [Simmons Drums] RE: Simmons SDS6 power question
2013-10-02 by Nick Zampiello
i got it going! here s a link thanks for the help! http://xbs111.wordpress.com/ NEW ALLIANCE EAST!!!! ... New Alliance East - Mastering New Alliance
Re: [Simmons Drums] RE: Simmons SDS6 power question
2013-10-01 by Nick Zampiello
cool, it also seems that if i hooked them up backwards: white to brown white to brown the transformer would just pass no current. z NEW ALLIANCE EAST!!!!
Re: [Simmons Drums] RE: Simmons SDS6 power question
2013-10-01 by Nick Zampiello
cool ill try that. i looked for the company part number and couldn t find anything on the web. z NEW ALLIANCE EAST!!!! ... New Alliance East - Mastering
Re: [Simmons Drums] RE: Simmons SDS6 power question
2013-10-01 by Michael Buchner
the other brown and white are connected. open this connection. measure between the brown and the brown soldered to the board, same with both whites. you should
Re: [Simmons Drums] RE: Simmons SDS6 power question
2013-09-30 by Nick Zampiello
one white and one brown are hooked up now. if i hook the other pair up to the same terminals the same way this should get me parallel for 110 perhaps? thanks!
Re: [Simmons Drums] RE: Simmons SDS6 power question
2013-09-30 by Nick Zampiello
awesome! i figured it was simple. just wanted to make sure i didn t have to change anything else z NEW ALLIANCE EAST!!!! ... New Alliance East - Mastering
Re: [Simmons Drums] RE: Simmons SDS6 power question
2013-09-30 by Michael Buchner
You are right. There are two primary coils. I don t know if the two coils are between white/white and brown/brown or a mixture (each coil brown in/white out),
Re: [Simmons Drums] RE: Simmons SDS6 power question
2013-09-30 by Nick Zampiello
i ve got one toroidal. there s a piece of tape inside with 115 crossed out and 230 written next to it. like it was changed to be 230 at some point. ...
Re: [Simmons Drums] RE: Simmons SDS6 power question
2013-09-30 by Michael Buchner
You have the version with a single toroidal transformer or with an additional small second one? Von meinem iPhone gesendet
Re: [Simmons Drums] RE: Simmons SDS6 power question
2013-09-30 by Nick Zampiello
cool so the tranny in my sds6 has two sets of brown/white wires. one set goes to the primary points on the psu. the other is tied together. NEW ALLIANCE
First lot of memory carts have been sent
2013-09-30 by <warlandr63@...>
Hi group, I have sent out the first batch of orders last week to those who responded to my earlier request for contact and email details. I need the following
RE: Simmons SDS6 power question
2013-09-30 by <warlandr63@...>
All of the toroidal transformers I have seen in Simmons gear are multi tapped on the primary. (keeps cost and stock holdings down to do it this way) For the
NEW Hihat Pedal for SDSV & SDS7
2013-09-29 by <Jacquot.Patrice@...>
Hi group, just a quick word to say that after a (passive) research & not wanting dealing with the original HH pedal(bc price & ergonomic reasons) I finally
Simmons SDS6 power question
2013-09-27 by Nick Zampiello
Hey synth drummers! is there a transformer tap in the SDS6 to switch between us/uk voltage ? wondering if it needs a power transformer to become US. z NEW
Simmons SDS Drum Pads with original rack (black) for Sale on ebay (UK only)
2013-09-20 by robertc_art
Hi All, I am selling my Simmons drum pads kit + original drum rack all in black if anyone is interested:
Minor issue with SDS8
2013-09-18 by <ptmetcalf@...>
Has anyone else experienced the follow issue with their SDS8? The noise function seems to spill over into all channels while in factory mode. Also, when you
Re: [Simmons Drums] New yahoo groups
2013-09-17 by jesper
Just like I had to rectify the files section that was warped too... I ll double check my other groups too - thanks Richard! -- electronically yours, jesper -
Re: SDS6 and MTM for sale UK
2013-09-17 by vout@...
Hmm, forgot they hide your email address, try voutathotmaildotcom
Re: SDS6 and MTM for sale UK
2013-09-17 by vout@...
Hi, Seems there are major problems with the Yahoo messaging system just now. Anyone interested please just email me directly (vout@hotmail.com) I ve had strong
Re: SDS6 and MTM for sale UK
2013-09-17 by vout@...
Just a follow up to say I have had serious interest in the SDS6 (not surprising) and a couple of good offers. I m going to put a deadline of 6pm GMT Wednesday
New yahoo groups
2013-09-17 by <warlandr63@...>
Ok this may help others. I have had to go into my profiles and use Manage My groups to reset ALL the various group settings to get things working again. You
who else is having problems with new group
2013-09-17 by <warlandr63@...>
I hope this gets through as I have posted a number of times since the yahoo update and none have appeared. Are others having problems with this new group
SDS6 and MTM for sale UK
2013-09-16 by vout@...
Hi, I am seriously considering selling my SDS6 and MTM. They are the ones in the files section showing the MTM LCD replacement. They are both in very good