Re: Betr: Re: [Simmons Drums] sds9 proms dead? 2
2008-01-05 by jesper
... Good one! I recently changed the lightswitches in my living room, 233 volts (that s what s in my walls) through index finger and thumb. Blue spark too -
Messages
Browse messages
Page 108 of 172 · 8595 messages matched
Betr: [Simmons Drums] Simmons, Simmons, Simmons
2008-01-05 by Berk Aarts
Do you have a friend who is a bit in metalworking?? Those legs are just a piece off metal, bend and a cone on the underside to prevent them from slippin and
Betr: Re: [Simmons Drums] sds9 proms dead? 2
2008-01-05 by Berk Aarts
If you are not experienced: Unplug the unit from 220V !!!!!!!!!!!! sorry not trying to offend anybody, just telling from experience good luck Berk ...
Re: [Simmons Drums] Simmons, Simmons, Simmons
2008-01-05 by jesper
... You could always ask someone local guy to make a new set of legs. It isn t exactly rocket science behind the bass spurs... Good luck! -- electronically
Simmons, Simmons, Simmons
2008-01-05 by frendn8
Does anyone have any sds9, sds2000, or sdx pads for sale and/or some legs for a bass drum? I scored some sds7 and 8s off of ebay with no legs for the bass
Re: [Simmons Drums] sds9 proms dead? 2
2008-01-04 by jesper
... Where in Italy are you then? There are many experienced techs around there too. And otherwise shipping to and from Thierry shouldn t be too stiff if he can
Re: [Simmons Drums] sds9 proms dead? 2
2008-01-04 by jesper
... Not trying to point you out as a moron, but are you triggering from the midi keyboard and sending the trig to _just_ ring or _just_ tip to check? If so,
Re: [Simmons Drums] sds9 proms dead? 2
2008-01-04 by giamesimmons
Dear Michael & Jesper, I want really thank you for your help. Michael: with the hint you gave me, I ll try to explain the problem to a repair shop. Here in
Re: [Simmons Drums] sds9 proms dead? 2
2008-01-03 by Michael Buchner
Hello, the diagnostic is difficult without the SDS9 on the table, but I ll try. You don t need a stereo pad to check, if you work with button mode or midi.
Re: [Simmons Drums] sds9 proms dead? 2
2008-01-03 by giamesimmons
There s a dedicated channel for the rimshot consisting of two proms: one for rimshot and one for cross stick, you can program if you want to use rimshot A or
Re: [Simmons Drums] sds9 proms dead? 2
2008-01-03 by jesper
... OK, back to original post then; ... I don t follow 100% then. Is the rimshot a dedicated prom and a dedicated channel or is it an add-on to the snare so to
Re: [Simmons Drums] sds9 proms dead? 2
2008-01-02 by giamesimmons
No, I m doing test with the button tap function, that allow me to test the sounds without striking the pads... To tell the truth, I m not sure to have the
Re: [Simmons Drums] Mighty Boosh - Eels Song - Spot the Simmons!
2008-01-02 by jesper
... Now! :) Nice one... SDS-7, right? -- electronically yours, jesper - -- --- ---- ----- ---- --- -- - www.electronic-obsession.se www.myspace.com/machinepop
Re: [Simmons Drums] sds9 proms dead? 2
2008-01-02 by jesper
... Are you using the correct pad? The correct cable (stereo I guess)? Is it working? -- electronically yours, jesper - -- --- ---- ----- ---- --- -- -
sds9 proms dead? 2
2008-01-02 by giamesimmons
Hi everybody, do you have any suggestion about this problem: On my sds9 I can t get the rimshot sound. I made different tests: I know for shure that the proms
Re: Betr: [Simmons Drums] hello all, 80's Fusion band
2007-12-31 by Robert
No- that wasn t it. It s going to drive me nuts... ... ____________________________________________________________________________________ Looking for last
Betr: [Simmons Drums] hello all, 80's Fusion band
2007-12-31 by Berk Aarts
perhaps UZEB?? Berk ________________________________________________________________________________________ 12move ADSL: Voordelig, snel en onbeperkt
hello all, 80's Fusion band
2007-12-30 by Rob
I just set up my SDS7 after about 15 years! It s dead. (well, not actually dead, but no sound out to the amp.) I m going to crack it open and check for a
Portakit Question
2007-12-28 by haley1966
I havent posted here for a while, but was hoping somebody might be able to point me in the right direction. I have a Portakit (1988 Ver. 1 upon powering
SV: Re: [Simmons Drums] finally i grabbed another sdsv snare module on ebay ;=)
2007-12-28 by KW
thanx, nice peppercookie!! hehe, great idea! happy ending and a new one to you all !! ... Congrat s KW, I know you ve been looking! =) OT, but still nice for
Re: [Simmons Drums] finally i grabbed another sdsv snare module on ebay ;=)
2007-12-28 by jesper
... Congrat s KW, I know you ve been looking! =) OT, but still nice for lovers of old musical gear - my nerdy input into baking around x-mas this year;
finally i grabbed another sdsv snare module on ebay ;=)
2007-12-28 by memtechlist
i manage to win the auction of an sdsv snare module the other day... $114 + another $16 for the shipping, great deal was nt it? the one i have in the brain
Re: [Simmons Drums] New file uploaded to Simmons_Drums
2007-12-28 by jesper
... Cool! So let s hope Paul downloads and adds it to his site too then... -- electronically yours, jesper - -- --- ---- ----- ---- --- -- -
Re: [Simmons Drums] New file uploaded to Simmons_Drums
2007-12-28 by giamesimmons
No, it s not the same one. It s the complete manual (much more pages) Cheers, Giame ... much
Re: [Simmons Drums] New file uploaded to Simmons_Drums
2007-12-28 by jesper
... Is it the same as this one?; http://simmons.synth.net/sds9/docs/SDS_9_user_guide.pdf If so you don t need to upload. Yahoogroups doesn t have room for much
New file uploaded to Simmons_Drums
2007-12-28 by Simmons_Drums@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Simmons_Drums group. File :
New file uploaded to Simmons_Drums
2007-12-28 by Simmons_Drums@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Simmons_Drums group. File :
sds9 prom channel dead
2007-12-28 by giamesimmons
Hello everybody I m a proud owner of a sds9. I have one problem and I was wondering if you could help me... On my sds9 I can t get the rimshot sound. I made
Re: Mighty Boosh - Eels Song - Spot the Simmons!
2007-12-22 by gwynclarke
They look to be a set of SDS-7 s. I had a set IDENTICAL to these, back in the mid 80 s. I think I first saw Simmons drums in the Kajagoogoo music video Too
Re: Questions on four-prommed SDS7 cards
2007-12-22 by Gordon Pearce
... I read somewhere that there was a modification you could get that took either a bigger EPROM or a daughterboard with more sockets, and allowed you to
Re: [Simmons Drums] Questions on four-prommed SDS7 cards
2007-12-21 by hamsterdrum85
Then I probably suppose that there are no Simmons SDS7 cards that will hold more than 16k (depending on the card type). I m wondering if there is a possibility
Re: [Simmons Drums] Questions on four-prommed SDS7 cards
2007-12-21 by WT
Isn´t there any switch for selecting which eprom to read from ? Alternatively, maybe the analog section is bypassed and its programming features are used to
Questions on four-prommed SDS7 cards
2007-12-21 by hamsterdrum85
Hi, Does anybody know what the four-prommed SDS7 cards are used for? Are the sounds selectable like on a Simmons SDS1000, or are they parts of sounds on
Re: [Simmons Drums] Mighty Boosh - Eels Song - Spot the Simmons!
2007-12-21 by Chris Strellis
... Strange? Still works for me! Anyhow - just YouTube search for Boosh and Eels ;) Cheers Chris
Re: [Simmons Drums] Mighty Boosh - Eels Song - Spot the Simmons!
2007-12-20 by jesper
... video unavailable Was it something newly broadcasted? The TV channels are hunting youtube with blow torch these days. (not that they shouldn t...) --
Mighty Boosh - Eels Song - Spot the Simmons!
2007-12-20 by Chris Strellis
http://www.youtube.com/watch?v=Ap78YXAcEY8 Zany British humour with a special prop ;) Cheers Chris http://www.strellis.com http://www.myspace.com/strellismusic
Re: SDS-III in da houze!
2007-12-17 by simplyanalogue
... Thanks! BTW, I must ve missed this mail originally cause I only saw it now online while throwing out the spammer... anyway... ... Yes, i plan to... one
Re: [Simmons Drums] sds9 pads with sdsv
2007-12-16 by jesper
... Check the archives it s been discussed before - if someone else can t fill you in on the details again. There are tech dudes here who know better. I have
sds9 pads with sdsv
2007-12-15 by NYMO's
Hi Jesper et al, I have a standard sdsv and I am going to try out some sds9 pads with the intention of buying them . The pads have 6.5mm jack out and the sdsv
Re: SDS-III in da houze!
2007-12-14 by randaleem
Hi Jesper, Congratulations! Any chance you ll be making some of that paper SDS3 documentation available via scans or PDF s? Seems to be a pretty limited amount
Re: [Simmons Drums] Re: "Famous" owners of Simmons kit
2007-12-04 by jesper
... Inside Simmons List deals are cool. My SDS-III pads have the logo of the band Prism on them. Modded to match the look of the SDS-V s with plexi surface
Re: [Simmons Drums] Re: "Famous" owners of Simmons kit
2007-12-04 by jesper
... Cool! Vintage gear, vintage artist! ;) I ve just ordered spare parts for mine... banzai electronics in Germany is recommended for such semi-rare parts if
Re: [Simmons Drums] Re: "Famous" owners of Simmons kit
2007-12-04 by Patrice Jacquot
Hi everyone, famous owner you say ? what do I have in stock ; ah yes, my SDS7(11 voices) / MTM / ADT came from Gilson Lavis from Jools Holland, famous kits ,
Re: [Simmons Drums] Re: "Famous" owners of Simmons kit
2007-12-04 by brian walker
Hi I have Tommy Steel s SDS3 in its original road case with tour details all over it Brian ...
sds-3 or -4 in live video
2007-11-30 by jesper
Hi List! I just traded a bunch of records and VHS tapes with a friend and among them were OMD - Live at the theatre royal drudry lane which is a filmed live
Re: "Famous" owners of Simmons kit
2007-11-28 by Ralph
I purchased a set of SDSVs on eBay from a music store in Massachusetts, and the seller said the set once belonged to Jon Sib Hashian, drummer for Boston. I
Re: [Simmons Drums] sds7 pads
2007-11-27 by jesper
... It s different hot depending on serial, scary but true, all according to the manual... -- electronically yours, jesper - -- --- ---- ----- ---- --- -- -
Re: [Simmons Drums] sds7 pads
2007-11-27 by Patrice Jacquot
Hi Dudes, just in case, remember that the MTM has connectors to adapt XLR either from SDSV & 7 ... & also jack plugs ...& could attack any type of drum
Re: [Simmons Drums] sds7 pads
2007-11-27 by Haley Johnson
Those pads are compatable with all the brains. There are to types or connectors that all brains and pads use, 1/4 and XLR. You need a abapter or you can do
Re: [Simmons Drums] sds7 pads
2007-11-27 by Michael Buchner
The original SDS7 pads have a resistor soldered to the xlr. The sense of this resistor was to avoid crosstalk together with the SDS7s brain. So the trigger