SDS-III in da houze!
2007-11-27 by jesper
Hi list! I m just in need to exult my joy after opening two large boxes containing a SDS-III and the accompanying pads + all the necessary paperwork such as
Messages
Browse messages
Page 109 of 172 · 8595 messages matched
sds7 pads
2007-11-26 by James Jaques
I have a question about Simmons pads. I have just purchased a full set of SDS7 pads off of ebay and was wondering wich brains are compatable with these pads?
Re: [Simmons Drums] Re: SDS7 (not working properly but quite loaded) for sale
2007-11-26 by jesper
... I can see the bargain star glowing... But on the other hand. I m waiting for my SDS-III arriving tomorrow so I could be a lot gloomier! :) --
Re: SDS7 (not working properly but quite loaded) for sale
2007-11-26 by superwolle70
Yes, sorry, while I was waiting for prices for the individual cards I decided to keep it for myself, particularly because in the meantime my friend made an
Re: [Simmons Drums] Re: SDS7 (not working properly but quite loaded) for sale
2007-11-26 by jesper
... But dude... I asked for a idea about prices for individual cards and/or the entire machine and never heard anything. -- electronically yours, jesper - --
Re: SDS7 (not working properly but quite loaded) for sale
2007-11-26 by superwolle70
Sorry guys, you have had your chance. I bought it for myself...
Betr: Re: [Simmons Drums] cool... turtle time!
2007-11-24 by Berk Aarts
What a strange telephone?!?! (The reaction from the kiss drummer when he saw his new turtle pad as presented to him by his roadie) Berk ...
Re: [Simmons Drums] cool... turtle time!
2007-11-23 by Jack
I m not going to bid, just wanted to show the auction... Well done, it s always good to be informed. & in this case , it s just a good opportunity to tell the
Re: [Simmons Drums] cool... turtle time!
2007-11-23 by jesper
... I m not going to bid, just wanted to show the auction... -- electronically yours, jesper - -- --- ---- ----- ---- --- -- - www.electronic-obsession.se
Re: [Simmons Drums] cool... turtle time!
2007-11-23 by Jack
le 23/11/07 9:39, jesper à jesper@electronic-obsession.se a écrit : http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=160183076037&ssPageName=A
cool... turtle time!
2007-11-23 by jesper
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=160183076037&ssPageName=ADME:B:SS:US:1123 -- electronically yours, jesper - -- --- ---- ----- ---- --- -- -
SDS7 (not working properly but quite loaded) for sale
2007-11-20 by superwolle70
Hi group, a friend of mine who cannot speak english asked me to propagate this SDS7 for sale. So here is the translation of what he sayed about this machine.
SV: [Simmons Drums] happy simmons kids
2007-11-17 by KW
quite nice mate, i sometimes take cool photos when my children is on to my synths & drums as well, about 403% much more cooler when they get older than dad
Re: [Simmons Drums] Re: Eproms?
2007-11-16 by phoof
would that explain why the proms would not sound? and only the osscilators work? seems to be that. but, if they are dead, then its a more serious problem...
[Simmons Drums] Re: Eproms?
2007-11-16 by Gordon Pearce
... It doesn t actually matter about the type very much. About the only time it does matter is if you ve got a NiCad battery, which kind of needs to be
Re: Betr: [Simmons Drums] happy simmons kids
2007-11-16 by jesper
Thanks! :) The CD s gives a good mirror effect. One wall is Microsoft in-house upgrades and demos. But my biggest worry is that time will prove one of all
Betr: Re: [Simmons Drums] Re: Eproms?
2007-11-16 by Berk Aarts
Hi phoof Sounds like a thermo problem get yourself a can of coldspray, when the problem occurs you can freeze-out each component one by one good luck Berk ...
Betr: [Simmons Drums] happy simmons kids
2007-11-16 by Berk Aarts
animal! Berk ps like the floor- and wallpaper ... ________________________________________________________________________________________ 12move ADSL:
Betr: Re: Betr: Re: [Simmons Drums] Re: Eproms?
2007-11-16 by Berk Aarts
wakie wakie No it was I the ass who did not look in his agenda Please let me know when you are again in holland ?? greet Berk ...
happy simmons kids
2007-11-16 by jesper
Hi List! My two enjoys the hexapads even if they re not connected; http://electronic-obsession.se/studio/simmons/drummerboy.jpg
Re: [Simmons Drums] Re: Eproms?
2007-11-15 by jesper
... Exchanging a battery in a 20 year old electronic music machine is no problem, it s a necessity. Check the manual, if you don t have one I bet there is on
Re: Betr: Re: [Simmons Drums] Re: Eproms?
2007-11-15 by phoof
fuck we came already man ! we were at VERA in groningen and OCCII in amsterdam and WORM in rotterdam ! I am an ass for not email you again. we ll be back
Re: [Simmons Drums] Re: Eproms?
2007-11-15 by phoof
No, not sure... the unit starts up by fails and freeze after abotu 5 mins. Could it be the battery? Where is it located? Is it a common problem? ... From:
Re: [Simmons Drums] Re: Molding For SDSV?
2007-11-15 by Haley Johnson
Jim wrote: You d better go to Home Depot and get yourself some rubber door molding and can of chrome matte Krylon!!!! You d have
Re: [Simmons Drums] Re: Eproms?
2007-11-15 by michael.buchner@debitel.net
Hello, if you don t get copies in your country, email to me: michael.buchner@debitel.net and you can get prices and sounds available. Of course, the original
Betr: Re: [Simmons Drums] Re: Eproms?
2007-11-15 by Berk Aarts
Hi phoof SOme tips?? -Try a good electronic store in hometown, perhaps there works some kinda nerd. Those guys know ecxatly the replacement parts. -try on an
Re: [Simmons Drums] Re: Eproms?
2007-11-15 by jesper
... Harvest old electronic equipment is a good source. Otherwise there are new for sale at electronics stores, but they re not very cheap... just like back
Re: Molding For SDSV?
2007-11-14 by Jim
You d better go to Home Depot and get yourself some rubber door molding and can of chrome matte Krylon!!!! You d have better luck building a time machine, and
Molding For SDSV?
2007-11-14 by crew38special
Hi All, Does any one know where you can get the molding for the SDSV pads that is on the sides. The one on mine is broken. Haley J.
Re: [Simmons Drums] Re: Eproms?
2007-11-14 by phoof
I think my proms are dead on my sds9. where can i get others? ... From: jesper To: Simmons_Drums@yahoogroups.com Sent:
Re: [Simmons Drums] Re: Eproms?
2007-11-14 by jesper
... Promise, once the studio is up and running again after the rebuild. But I warn you, it s mostly industrial, noise, electro weirdness they re suited for...
Re: Eproms?
2007-11-14 by superwolle70
post some mp3 samples? ... them by ... thing that ... indeed
Re: [Simmons Drums] Re: Eproms?
2007-11-14 by jesper
... OK then, but then I can repeat my favourite snatch . Old (and I mean old) printers often have the typefaces and programs burnt on eproms. Sometimes
Re: Eproms?
2007-11-14 by superwolle70
Wolfgang (that s me) only knows that A is the sixth letter in his name, so I would like to forward this question to Michael...
Re: [Simmons Drums] Eproms?
2007-11-14 by jesper
... The letter usually refer to the voltage used... I don t know them by heart but I bet Wolfgang or someone else in here does. Worst thing that can happen is
Eproms?
2007-11-14 by crew38special
Hi All, I found a eprom that is a 27128A. I know that the 2764 is used for the bass and snare drums and the 27128 is for toms. What does the (A) mean on the
Re: [Simmons Drums] use of MTM as sequencer
2007-11-11 by WT
No WT http://medlem.spray.se/waveterm/LJLab2006/ ... From: phoof To: simmons list Sent: Monday, November 12, 2007 12:31 AM Subject: [Simmons Drums] use of MTM
use of MTM as sequencer
2007-11-11 by phoof
There is no possibility of outputing variable volatages on the 8 trig outputs, summed so that it can be used as a sequencer (with a modular synthesizer)??? I
Re: [Simmons Drums] Digest Number 1027
2007-11-11 by carsten schulz (private)
... It seems that there are some problems with videos hosted on the .Mac servers. Thus, I ve just uploaded the video on YouTube:
Re: [Simmons Drums] Digest Number 1027
2007-11-10 by carsten schulz (private)
... Thanks! Here s the direct link to the video: http://web.mac.com/carsten.schulz/SEQ01/Media/IMGP0434.AVI However, please note that this is not a permalink -
Re: [Simmons Drums] Digest Number 1027
2007-11-10 by Gordon JC Pearce
... Looks good. Can you post a link to the video of it? Gordon
Re: [SPAM] [Simmons Drums] Simmons SDSV with a MFB SEQ-01 sequencer
2007-11-10 by jesper
... Good solution! Poor me, my SDS-V is filled ;) electronically yours, jesper
Re: Simmons SDSV with a MFB SEQ-01 sequencer
2007-11-09 by superwolle70
cool and freaky! (applause!!!) ;-)
Simmons SDSV with a MFB SEQ-01 sequencer
2007-11-09 by carsten schulz (private)
Hi, I liked the idea of filling the spare slots of my Simmons SDSV drumbrain with a MFB SEQ-01 drum sequencer. This is how it looks like:
Re: [Simmons Drums] cleanup time (stuff FS)
2007-11-09 by phoof
forgot the MTX9. ... From: phoof To: Simmons_Drums@yahoogroups.com Sent: Friday, November 9, 2007 10:20:32 AM Subject: [Simmons
cleanup time (stuff FS)
2007-11-09 by phoof
Simmons SDS8, sds9 (a little wonky, needs cleanup), sds200, and MTM. Accepting offers. In Canada. Ask a question on any topic and get answers from real people.
Betr: Re: [SPAM] [Simmons Drums] Re: SDX again...
2007-11-07 by Berk Aarts
Bet the hangover was enormous Berk ... ________________________________________________________________________________________ 12move ADSL: Voordelig, snel en
Re: Any recent sales on SDX pads?
2007-11-07 by superwolle70
... except someone blows up his SDX brain and sells the whole stuff, broken sampler and a pack of ZI pads at a reasonable price (like it happened to me). So if
Re: [SPAM] [Simmons Drums] Re: SDX again...
2007-11-07 by jesper
... Maybe he set fire to the pads and inhaled the fumes? ;-) -- electronically yours, jesper - -- --- ---- ----- ---- --- -- - www.electronic-obsession.se
Any recent sales on SDX pads?
2007-11-07 by blynden1991
Hi, Just wondering whether it s pointless or not to keep an eye out for the Simmons SDX pads on eBay and the likes. I seriously doubt there is anyone that will