Stooge panel design for Bi-N-Tic filter
2005-05-08 by djbrow54
I really liked Richard s design for the CGS Bi-N-Tic filter with the sub outputs. I also like all the tic marks and this makes for a fairly expensive panel.
Messages
Browse messages
Page 59 of 66 · 3299 messages matched
SEM panel photo uploaded
2005-03-20 by Jeffrey Pontius
Hi Synth Panelists, By request I ve uploaded a photo of my SEM 1A mounted in a Schaeffer produced 19 X 5U panel in the Photos/Pontius SEM folder. Hopefully
FS: Stooge Mixer/Comparator Panel with PCB
2005-03-16 by keninverse
I don t have time to build this so it needs to go. on the block is a Richard Brewster s mix/comp stooge panel and I ll throw in the CGS mega mixer pcb. $30
Re: SEM panel -correction: 5U panel, not 6U
2005-03-15 by Jeffrey Pontius
... Dennis, ... Yes, I should be able to do this, but it will this weekend at the earliest that I will be able to take a photo. Although not a full photo, you
Re: SEM panel -correction: 5U panel, not 6U
2005-03-15 by m0n075
... Can you upload a photo off the panel with the sem mounted in it? Regards, Dennis
email address change
2005-02-28 by pugix
If you wish to send me personal email, please use this new Earthlink address. Thanks, Richard Brewster
Re: .fpd files
2005-02-18 by tontaub
sorry, forgot: You get the FP Designer from http://schaeffer-apparatebau.de Michael.
Re: .fpd files
2005-02-18 by tontaub
Hi Stuadh, while PDF (Portable Document Format) is a proprietary but nevertheless generic file format FPD files are used to control the CNC machines of
New file uploaded to ModularSynthPanels
2005-02-14 by ModularSynthPanels@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the ModularSynthPanels group. File :
Re: [ModularSynthPanels] Re: Blacet Mixer design
2005-01-23 by Richard Brewster
If you saw my post on the Blacet list, I noted that the bushing on the Panasonic pots is short. I happened to have some of these pots on hand, left over from
Re: Blacet Mixer design
2005-01-23 by djbrow54
I bought one of these boards and was thinking of designing a similar panel. Thanks! I assume this was designed for the Panasonic potentiometers that mount to
New file uploaded to ModularSynthPanels
2005-01-22 by ModularSynthPanels@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the ModularSynthPanels group. File :
Re: PAiA MIDI2CV panel
2004-12-22 by djbrow54
They are Mouser 16HR655 @ 5.04 each. They are front mounted with a rear nut and work quite well. I ve used a half a dozen for different projects. They have
Re: [ModularSynthPanels] PAiA MIDI2CV panel
2004-12-22 by Scott Juskiw
Looks great. Do you have a part number for those MIDI jacks? I will be needing some good quality MIDI jacks that I can attach to a Stooge panel. Looks like
Re: [ModularSynthPanels] PAiA MIDI2CV panel
2004-12-22 by Richard Brewster
Very neat job, Dave. -Richard Brewster
PAiA MIDI2CV panel
2004-12-22 by djbrow54
I just finished a panel for my PAiA MIDI2CV in an 1U MOTM format. I used Mountain thumbswitches for the MIDI channel and program select. I had to add a set of
Re: [ModularSynthPanels] .fpd files
2004-11-10 by Charles Stella
I use Virtual PC on my mac which works great for FPD files. Charles.
Re: [ModularSynthPanels] .fpd files
2004-11-10 by Spacemodular
I would like to know if this is something a mac can run as well? Is there any advantage with type of file over say a .pdf? Is the PC the defacto module
Re: [ModularSynthPanels] .fpd files
2004-11-04 by ALMAGATA@telefonica.net
You need the schaeffer-apparatenbau front designer software, I think is PC only, but may be it works in MAc using virtual PC. Best Regards, Josue ... De:
.fpd files
2004-11-04 by stuadh
Hi list, how do I go about reading .fpd files? By the way, I drive a MAC. I m building a CGS VCO, and I m interested in ideas for an all bells and whistles
Re: [ModularSynthPanels] Digest Number 153
2004-11-02 by Dana Fiorucci
Hi Dave, The gold panel looks awesome an entire modular with these types of panels would look great. Or maybe a color code for different module types might
Gold FrontPanelExpress
2004-11-01 by djbrow54
I did a gold FrontPanelExpress panel with black lettering. The black was a bit smeared here and there so I cleaned it up with acetone. I ve never had
Bass Pedals / front panel project
2004-10-18 by djbrow54
I just finished my first pass code and circuit design for a set of MIDI bass pedals. I got a set of used Hammond pedals (13 keys) and did a small pcb. Got it
Miniwave completed
2004-10-11 by djbrow54
I finished drilling my panel and mounting all the boards. Only made one wiring mistake that was easily fixed. I ended up mounting the bottom row of CV leds
Re: [ModularSynthPanels] Miniwave chassis built
2004-08-21 by Scott Juskiw
... My plan is to burn my own PROMs with waves that will be somewhat coordinated so that switching between PROMs will be useful. I consider each PROM as a two
Re: [ModularSynthPanels] Miniwave chassis built
2004-08-21 by Larry Hendry
... The very first expanded Miniwave was also made that way by Dave Hylander. ... How are you using it? Since the PROMS are so different, I find it hard to
Re: [ModularSynthPanels] Miniwave chassis built
2004-08-21 by Richard Brewster
Speaking of the Hylander expansion for the Miniwave, and Juskiw CV board... I modified my existing Miniwaves (in Schaeffer panels) to add the Hylander
Re: [ModularSynthPanels] Miniwave chassis built
2004-08-21 by Larry Hendry
These panels are finished. We are waiting the arrivel of the others to begin sorting and shipping. Thanks for everyones patience. Good quality match of MOTM
Miniwave chassis built
2004-08-20 by djbrow54
I have my Miniwave chassis built and am now waiting for my Stooge panel. The module has the Juskiw CV board and the Hylander expansion board. I made the
Re: Punches and Dies
2004-08-13 by Jeff Brown
Woohoo! MSC has a branch not far from me. I was able to order the punches and dies I need over the phone. Thanks for the tip! ... model 17?
Re: [ModularSynthPanels] Punches and Dies
2004-08-12 by Jay
... It s the Heinrich deep-throat model listed on the page above. I think you can special order square punch and die sets for it too.
Re: [ModularSynthPanels] Punches and Dies
2004-08-12 by Scott Juskiw
... Hi, which press did you buy? Do you have a part number for it from mscdirect?
Re: [ModularSynthPanels] Punches and Dies
2004-08-11 by Jay
... Don t know if they re compatible with yours though: http://www.mscdirect.com/PDF.process?pdf=2294
Re: [ModularSynthPanels] Punches and Dies
2004-08-11 by Jay
... I bought mine (and the press itself) at MSC: http://www.mscdirect.com
Punches and Dies
2004-08-11 by Jeff Brown
Hi Y all, I finally procured a Roper-Whitney model 17 punch press off of ebay. I got the idea from someone on this list (or another list) who got one. It is
1U Buchla 194 fixed bandpass filter with mixer
2004-06-26 by Jeffrey Pontius
I ve uploaded a 1U motm style Schaeffer front panel design for a Buchla 194 fixed bandpass filter with audio mixer (look in the Buchla Type directory for
Roland SC-7 Sound Canvas in MOTM format
2004-06-24 by djbrow54
I just finished converting a Roland SC-7 Sound Canvas to a MOTM format 1U panel. I drive it with my PSIM to operate it with control voltages. It s a GM MIDI
Blacet Format Panels
2004-06-22 by Mike Marsh
Hello All - I m gradually building up my Blacet format modular. This compliments my already pretty large MOTM format modular. The thing I miss most about the
New file uploaded to ModularSynthPanels
2004-06-22 by ModularSynthPanels@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the ModularSynthPanels group. File :
New file uploaded to ModularSynthPanels
2004-06-22 by ModularSynthPanels@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the ModularSynthPanels group. File :
Jeff's Mighty Milty is a Beauty!
2004-03-15 by Cynthia Webster
... A truly Beautiful job Jeff. Well Done! Cynthia
file uploaded: Milton motm 8U panel
2004-03-14 by Jeffrey Pontius
After many weeks of planning, ordering, and assembly, I finally have a Milton sequencer up and running. I ve uploaded a Schaeffer front panel design to a new
Re: [ModularSynthPanels] Digest Number 140
2004-03-13 by Cynthia Webster
... Howdy! The ALL PASS input on the Cynthia Synthacon Filter does not have it s own attenuator because the signal is buffered to all three of the other input
Re: CGS Synthacon VCF Stooge panel
2004-03-12 by sasami@hotkey.net.au
... There is no All attenuator because the attenuators are all POST MIXER. i.e, you feed a signal into the all input, and adjust the three pots to give
Re: [ModularSynthPanels] CGS Synthacon VCF Stooge panel
2004-03-12 by ixqy@aol.com
In a message dated 3/11/04 8:35:54 PM Central Standard Time, ... Yep, this sounds like the way to go. Thanks everyone for the input and recomendations. If a
RE: [ModularSynthPanels] CGS Synthacon VCF Stooge panel
2004-03-12 by John Loffink
I highly recommend you dedicate an Oakley Multimix with the Hendry triple attenuator modifications to the Steiner VCF without attenuators. This gives you
Re: [ModularSynthPanels] CGS Synthacon VCF Stooge panel
2004-03-12 by Tentochi
If you are doing it for the experience, then go for it. But I don t have enough time in my day as it is. Ha! I haven t tried them yet, so let us know if you
Re: [ModularSynthPanels] CGS Synthacon VCF Stooge panel
2004-03-12 by Richard Brewster
Got a link for information on the Gizmo board?
Re: [ModularSynthPanels] CGS Synthacon VCF Stooge panel
2004-03-12 by Tentochi
Reading all of this, I don t know why the wheel is try to be reinvented: http://www.cyndustries.com/modules_synthaconfilter.cfm ... The reason there is no ALL
Re: [ModularSynthPanels] CGS Synthacon VCF Stooge panel
2004-03-12 by Richard Brewster
... Yes. ... Basically, yes. The Synthacon VCF inputs presume a single low-impedance signal coming in. Injecting two signals at any of these inputs really