Re: MFOS sequencer panel?
2008-03-12 by revmoondj
Great! I ve signed up so should be getting it soon. Thanks!! ... want to
Messages
Browse messages
Page 44 of 66 · 3299 messages matched
Re: [ModularSynthPanels] MFOS sequencer panel?
2008-03-11 by David Moylan
It s in the FILES section of the MFOS yahoo group. If you don t want to sign up let me know and I ll send it to you. Dave
MFOS sequencer panel?
2008-03-11 by revmoondj
Hi, I m looking for the fpd of the MFOS sequencer, the circular design thingy. I mailed the designer but never got a reply. Does anyone here have it and able
YUSynth Fixed Filter Bank
2008-03-09 by wjhall11
Hi All - Taking cues from Dave Brown s implementation (http://www.modularsynthesis.com/yusynth/ffb.htm), here is Will s and my design for a standard MOTM
Re: [ModularSynthPanels] DotCom Cab Solution
2008-03-08 by Richard Brewster
I like the dot com cabinets a lot. The Stooge flat rails are the key to making the conversion. The only modules that don t fit in the bottom row are those
Re: Tau Phaser LED
2008-03-07 by adaaxs
I have a Sears hand drill that is a two speed, geared job, amazing bit of analog toolmaking. It is a very fine and effective tool, better than many of the
Re: [ModularSynthPanels] DotCom Cab Solution
2008-03-07 by Scott Deyo
great! thanks. and thanks to Richard for figuring out all the kinks : ) Scott Deyo The Bridechamber contact@bridechamber.com www.bridechamber.com
Re: [ModularSynthPanels] DotCom Cab Solution
2008-03-07 by David Moylan
Richard Brewster used them I believe: http://www.pugix.com/cabinet_new.htm
DotCom Cab Solution
2008-03-07 by Scott Deyo
So, I had to drop my cabinet sales -- too much work, no space, prices went up, blah blah blah. Has anyone used DotCom cabs for MOTM modules? Does the double
Re: [ModularSynthPanels] Re: Tau Phaser LED
2008-03-06 by Scott Deyo
For holes that exist, and in thicker metal like panels, I d recommend using normal bits. The unibit may not make a uniform hole; the hole on one side of the
Re: [ModularSynthPanels] Re: Tau Phaser LED
2008-03-06 by Mark
... While I agree with myself, I would call it a a power drill :) I do have an actual hand drill that belonged to my father. It has wooden handles and a crank
Re: [ModularSynthPanels] Re: Tau Phaser LED
2008-03-06 by loopcycle
I need a stepping bit myself to open up some panel holes too. So with a stepping drill (bit)--presumably the unibit --do you drill from the front or the back
Re: [ModularSynthPanels] Re: Tau Phaser LED
2008-03-06 by Scott Deyo
Like Mark says, a hand drill is ideal for this job. The paint won t chip, either. I make those holes smaller because individual users can always drill them
[ModularSynthPanels] Re: Tau Phaser LED
2008-03-06 by Mark
... You can just use a regular bit. ... Adding LED s to my 800 s was one of the best mod decisions I ever made. I used 741 s that I already had, with a
Re: [ModularSynthPanels] Second Run of Klee PCBs Now Available
2008-03-06 by James Elliott
I ordered 4 sets last night. I have a feeling I m going to end up with some Frankenstein home brew panels unless Scott can whip something up ;) (who knows
Re: [ModularSynthPanels] Re: Tau Phaser LED
2008-03-06 by James Elliott
Cool. I ve never drilled through metal this thick before. Is it an easy process? Do I need to get any exotic tools to do this (ie can I use a hand drill or do
Re: [ModularSynthPanels] Second Run of Klee PCBs Now Available
2008-03-06 by loopcycle
Here is the Klee project thread with links to documentation. http://electro-music.com/forum/topic-19278.html ...
Re: [ModularSynthPanels] Second Run of Klee PCBs Now Available
2008-03-06 by David Moylan
Scott, can you explain what functions are contained on each of the 2 boards? Thanks. Dave
Re: Tau Phaser LED
2008-03-06 by wjhall11
Jim - Yes - we re going to use a 696-SSI-LXH387HGW as well. This is the standard MOTM size LED. But the hole Scott made is smaller. We re going to drill out
Re: [ModularSynthPanels] Tau Phaser LED
2008-03-06 by James Elliott
Anyone??? Please... ... From: James Elliott To: ModularSynthPanels@yahoogroups.com Sent: Monday, March 3, 2008 1:16:35 AM Subject:
Second Run of Klee PCBs Now Available
2008-03-06 by Scott Stites
Just thought I d let you guys know, the electro-music store now has the second run of Klee Sequence PCBs available:
Re: [ModularSynthPanels] CGS65 Questions....
2008-03-04 by David Moylan
... Paia still offers the drum tone board which is basically a collection of 6 twin-T filter circuits. Dave
Re: [ModularSynthPanels] CGS65 Questions....
2008-03-04 by Mark
... No problem :) I still haven t built mine. At this point, I m waiting for the weather to get warmer. Then I ll build it, and JH s Tau Phaser pedal. I m
[ModularSynthPanels] Re: Wogglebug #3 (3rd Board run arrived)
2008-03-04 by Mark
... In order to do that I would have to buy an Intel Mac and a copy of Windows.
Re: Wogglebug #3 (3rd Board run arrived)
2008-03-04 by clickmrmike
... FWIW, I fun FPD on a Macbook Pro running Parallels/Windows without trouble. mrmike
Re: [ModularSynthPanels] CGS65 Questions....
2008-03-03 by James Elliott
Mark, I haven t forgotten your request. It s going to take some time before I can answer your questions. Why? Well because I have no EE experience other than
[ModularSynthPanels] Re: Wogglebug #3 (3rd Board run arrived)
2008-03-03 by Mark
... Thanks :) It looks like things could be shuffled around to add an extra knob in there, especially if it didn t have a clock input, as Richard suggests.
Re: [ModularSynthPanels] 19" width 1/4" mult panel? [was: (Re: Wogglebug #3 (3rd Board run arrived)]
2008-03-03 by Mark
While they wouldn t be labeled like an MOTM-910 (even though I still find the way the 910 is labeled rather confusing) you should be able to find plenty of 1U
[ModularSynthPanels] Tau Phaser LED
2008-03-03 by James Elliott
What LED is everyone using with the Bride Chamber Tau Pipe Phaser panel? I have a mouser 696-SSI-LXH387HGW, however the plastic housing is too big :( Thanks,
Re: [ModularSynthPanels] Wogglebug #3 (3rd Board run arrived)
2008-03-03 by Scott Deyo
You can always buy the PCB from me for the same price as from Ken. I think I have a few -- I didn t buy that many, I swear! ... Cheers, Scott Deyo The
Re: [ModularSynthPanels] Re: Wogglebug #3 (3rd Board run arrived)
2008-03-02 by Richard Brewster
I uploaded a FPD file called standard-woggle.fpd in the Richard Brewster Designs folder. This is how I might build it. I did not include a CLOCK IN jack,
Re: [ModularSynthPanels] Re: Wogglebug #3 (3rd Board run arrived)
2008-03-02 by David Moylan
Has anyone done a 1U 19 width 1/4 mult panel? I ve got a 12 space rack with 2 rows of MOTM format and wanted to fill the other 2 spaces with 2 1U height
Re: [ModularSynthPanels] The Last Doomsday Machine (?)
2008-03-02 by Scott Juskiw
The last one has been sold. Thanks to everyone who expressed interest in it.
Re: Wogglebug #3 (3rd Board run arrived)
2008-03-02 by djbrow54
I put a pdf image in the Files DJB designs Wogglebug.fpd folder. Dave
Re: [ModularSynthPanels] CGS65 Questions....
2008-03-02 by Mark
... How did you use a DPDT switch?? Are you switching the suppression grid as well?? I m thinking a SPDT switch could work in two ways: 1) ... grid --
Re: [ModularSynthPanels] Re: Wogglebug #3 (3rd Board run arrived)
2008-03-02 by Mark
... I have no idea, since I m on a Mac and cannot read FPE files. Also, I think Stooge Moe drew up an MOTM panel for a wogglebug, bitd. You might want to ask
Re: [ModularSynthPanels] Re: Wogglebug #3 (3rd Board run arrived)
2008-03-02 by Gerald Stevens
I built two last weekend, but just got them working yesterday (had to wait for replacement parts to be shipped). No problems with the circuitboard, just parts
Re: [ModularSynthPanels] Wogglebug #3 (3rd Board run arrived)
2008-03-02 by p. hendricks
... yes! please. planning on using the CGS real rings. was about to build a CGS tube VCA but mysteriously after I bought the parts and panel from Bridechamber,
Re: [ModularSynthPanels] CGS65 Questions....
2008-03-02 by James Elliott
Ok, CGS65 #1 is complete! The other 3 are all assembled component wise - they just need to be mounted. Now to address my own questions... 1) For some reason I
Re: Wogglebug #3 (3rd Board run arrived)
2008-03-02 by djbrow54
I m thinking of getting one of the PCBs so I played around with a 2U MOTM style panel. The design is in my folder: Files DJB designs Wogglebug.fpd I m not
RE: [ModularSynthPanels] The Last Doomsday Machine (?)
2008-03-02 by Dave Halliday
I ll take it if it is still available. $32? ( it needs to be shipped to 98266 - Northwestern Washington. Thanks! Dave ... No virus found in this outgoing
RE: [ModularSynthPanels] Re: Wogglebug #3 (3rd Board run arrived)
2008-03-01 by Anthony Rolando
... One nice thing about the direct coupling of the audio outs is that they make really great modulation sources themselves. Try feeding them into your
Re: [ModularSynthPanels] Re: ASM2
2008-03-01 by Laurie Biddulph
I should point out that for customers in the US/Canada that I am able to offer fully constructed cabinets as per that in the photos. These cabinets come
Re: [ModularSynthPanels] Re: Wogglebug #3 (3rd Board run arrived)
2008-03-01 by Richard Brewster
I received one of the boards from Jan this week. (Thanks, Jan!) I compared it with the schematic. The schematic incorrectly labels almost all of the pins on
Re: Wogglebug #3 (3rd Board run arrived)
2008-03-01 by julianzizko
There are a lot of people successfully woggling on electro-music so I would assume the PCBs are based on an updated schematic. (I have not got enough parts to
The Last Doomsday Machine (?)
2008-03-01 by Scott Juskiw
Hello all, I m packing PCB orders today and I noticed that there s just ONE Doomsday Machine left. Anyone want to make my day and take this off my hands? I m
Re: Wogglebug #3 (3rd Board run arrived)
2008-03-01 by julianzizko
I m looking to build a double bug, still not sure of the best way to implement the ring mod circuit though? Julian ... can ... PCB is ... easily it ... looks
Re: Wogglebug #3 (3rd Board run arrived)
2008-03-01 by Grant Richter
... This is insane! I sure hope the PC board is NOT made from the above schematic, because that schematic is chock full of errors. Has ANYONE successfully
Re: [ModularSynthPanels] Wogglebug #3 (3rd Board run arrived)
2008-03-01 by Scott Deyo
I m planning on a panel, too. I ll take a look at Jan s FPE file. Are we wanting a double Bug (doppelbug?) w/ ring mod outputs? I forget... Or shall we stick
Re: Wogglebug #3 (3rd Board run arrived)
2008-03-01 by Grant Richter
... I do NOT have a Wogglebug #3 board to test this on. But a quick and non-binding guess would be: To convert to 0-5 CV out and +/-5 V audio out. Do the