Re: Roland 100m Panels
2008-04-23 by ryktnk
Hello Thanks ! The 4 position switches control the gate mode :- [ OFF / SINGLE / REPEAT / LONG ] The 8 position switches control the length in clock pulses :-
Messages
Browse messages
Page 42 of 66 · 3299 messages matched
Re: [ModularSynthPanels] Re: new panels
2008-04-23 by Scott Deyo
They are. Should be three weeks or so. I m also out of 3-pot brackets for now, though I have a few old 3-pot Stooge ones left. Scott Deyo The Bridechamber
Re: new panels
2008-04-23 by clickmrmike
So Scott, if you re stocking Ian s PCBs, are panels in the works? clickmrmike
Re: [ModularSynthPanels] Roland 100m Panels
2008-04-23 by Scott Deyo
Great work, on the panel and behind it!!!! What do the slider switches control? Thanks for sharing, and good luck in your silkscreener search. Scott Deyo The
Roland 100m Panels
2008-04-23 by ryktnk
Hello I have just joined this group ! I have made some modules for Roland 100m system, which panels are made by Schaeffer.
Re: [ModularSynthPanels] new panels
2008-04-23 by Scott Deyo
; ) Scott Deyo The Bridechamber contact@bridechamber.com http://www.bridechamber.com Jealous Edison Record Kompany http://www.jealousedison.com
Re: [ModularSynthPanels] gated comparator
2008-04-22 by Scott Deyo
Scott, that is quite the idea! Or should I continue to answer individual emails as I do, frequently forgetting the dimensions and thereby having to go fetch
Re: [ModularSynthPanels] gated comparator
2008-04-22 by Scott Juskiw
I m not sure which Bridechamber bracket would be the best to use (for the TLN-864). Maybe Scott Deyo can post some pictures and dimensions of his brackets,
Re: [ModularSynthPanels] new panels
2008-04-22 by James Elliott
Scott, did I ever tell you I hate you. I might as well start signing my paychecks over to you :) Expect an order from me (very) soon. And thanks again for
new panels
2008-04-22 by Scott Deyo
Hi all, I ve got some new panels on the site -- 10 new Oakley, YUSynth FFB, CGS VCO. More in three weeks or so... New PCBs -- Ian Fritz s Threeler VCF and
Re: [ModularSynthPanels] gated comparator
2008-04-22 by Scott Deyo
You know, I had never looked at what took place behind the panel before. My first reaction is Holy shit! There s a lot going on there! The CGS Gated
gated comparator
2008-04-22 by adaaxs
Which bracket should I use to do the least drilling on my TLN 864 ? Also I am having trouble geting the ADG419 chip. Can I use a DG403 ? How does this diifer
AD419
2008-04-21 by adaaxs
Anybody got a spare AD419 ?
16mm PCB mount pots
2008-04-16 by Scott Deyo
Hi group, Is anyone interested in 16mm PCB-mount Alpha pots in linear taper? They have .2 leg spacing, and I m thinking I ll get 100k and 1m values. I need to
Re: [ModularSynthPanels] hookup wire
2008-04-11 by Mark
... You can get 100 foot rolls of 22 AWG for $5.75 each: http://www.allelectronics.com/matrix/Hook_Up_100.html I also have some 24 AWG stranded which works
Re: [ModularSynthPanels] hookup wire
2008-04-11 by Scott Deyo
22ga stranded, your basic hookup wire. Now over $20 a spool! What, are they making that stuff out of corn or something? ; p Scott Deyo The Bridechamber
hookup wire
2008-04-11 by adaaxs
Time for me to get some new hookup wire. I am down to bits of 30ga solid telco untinned copper, 20 ga tinned solid and stranded. I need to re up on my
Tau Pipe PCBs
2008-04-08 by Scott Deyo
And for those who still need Jurgen s Tau Pipe PCBs, I now have _plenty_, as well as panels and kits! Cheers, Scott Deyo The Bridechamber
Re: Bridechamber Thomas White sequencer panel?
2008-04-08 by andrewlistmayer
Yes, Thanks to both of you. You guys are great! ... even see the MOTM purists ... gereal has an issue ... components became an ... haible may be a better ...
Re: Bridechamber Thomas White sequencer panel?
2008-04-07 by adaaxs
That is very cool of you Thomas. I just love that design. I can even see the MOTM purists knucling under dor it. I see your concern about the wiring. MFOS in
Re: [ModularSynthPanels] Re: Bridechamber Thomas White sequencer panel?
2008-04-05 by Scott Deyo
Thanks Thomas! I ll get going on that, then. Maybe this summer it will be done. Cheers, Scott Deyo The Bridechamber contact@bridechamber.com
Re: Bridechamber Thomas White sequencer panel?
2008-04-04 by djthomaswhite
I have no problem whatsoever with my panel being open source. That s how it is anyway with the MFOS list. I would want one of course Scott ;) I have received
Re: the basic new bridechamber site
2008-04-04 by djthomaswhite
Really like the new layout Scott! Much imporoved navigation, Thomas
Re: [ModularSynthPanels] Bridechamber CGS SubOsc
2008-04-01 by Scott Deyo
Hey Mike, I haven t gotten to mine yet, but here s the plan: Use dual 100k or dual 50k lin pots. You ll need two CV Mixer PCBs. The different divisions from
Bridechamber CGS SubOsc
2008-04-01 by clickmrmike
So Scott, exactly how have you wired your version of the CGS SubOsc? The panel is cool, but I don t completely grok the switched pot layout. Thanks, mrmike
Re: [ModularSynthPanels] Re: CGS Frac panels?
2008-03-31 by kwote uno
That is a great site. Thanks!! On 3/31/08, krisp wrote: You could have a go at this one there s A PCB layout
Re: [ModularSynthPanels] Re: CGS Frac panels?
2008-03-31 by krisp
You could have a go at this one there s A PCB layout http://xlargex.xl.funpic.de/projects/808/docs/808bdV1.0.pdf
Re: [ModularSynthPanels] Re: CGS Frac panels?
2008-03-31 by kwote uno
haha. yeah. i m definately not on that level by far, but that s definately something for the archives. i d like to think someday i could get that diy. thanks!
Re: [ModularSynthPanels] Re: CGS65 Questions....
2008-03-31 by Mark
... I still don t know how you switched two grids with one SPDT switch. While Ken suggests connecting the suppression grid to a different voltage when
Re: CGS Frac panels?
2008-03-31 by Sam Ecoff
... The 808 kick circuit is published in numerous places online. You might start here: http://machines.hyperreal.org/manufacturers/Roland/TR-808/schematics/
Re: [ModularSynthPanels] Re: CGS Frac panels?
2008-03-30 by kwote uno
i see. nice to know. just wondering if there s a diy of it though?
Re: [ModularSynthPanels] Re: CGS65 Questions....
2008-03-30 by mcb, inc.
... The jumper alternatives on the board (one solid line, one dashed line) switch the suppresion grid as per Ken s modding suggestions on his website. I m
Re: [ModularSynthPanels] Re: MOTM480R Panel from Will and Bill
2008-03-30 by Richard Brewster
Some normalizations can be very useful, like the connections to the IN, CLOCK IN, and OUT on the S&H in my Wogglebug:
Re: [ModularSynthPanels] Re: CGS Frac panels?
2008-03-30 by Sam Ecoff
... The 8008 is not a CGS design. It s Michael Ford s design based on the TR-808 kick circuit. ... Sam E. _______________________________ Sam Ecoff
Re: [ModularSynthPanels] Re: CGS65 Questions....
2008-03-30 by Mark
... Two grids?? Do you mean you are switching the suppression grid as well?? My plan was to switch the bias on the signal grid between two values. Did you
Re: MOTM480R Panel from Will and Bill
2008-03-30 by wjhall11
You know - that s a great point about the normalized inputs. Remembering about them may not be an issue for Will s 16yr old brain, but it s sure to be for me
Re: [ModularSynthPanels] MOTM480R Panel from Will and Bill
2008-03-30 by Scott Deyo
Yes, I found both of those articles -- same issue, weren t they? That s cool. Electronotes is indeed a great read -- all stacked three feet of it! : ) Scott
the basic new bridechamber site
2008-03-30 by Scott Deyo
Hello again, I redid my site from scratch. It is VERY basic right now, but I think it has all the new parts, PCBs, panels, CD, modules, etc.
Re: [ModularSynthPanels] MOTM480R Panel from Will and Bill
2008-03-29 by Richard Brewster
Glad to see Will and Bill are brave enough to do this one. Nice twist with the Join/Separate switch. I could have added normalized connections between the
Re: [ModularSynthPanels] Re: CGS65 Questions....
2008-03-29 by mcb, inc.
I ve uploaded a small image showing how I wired the SPDT switch to control bias to two grids. In case it isn t clear, the top end of the resistor is wired
Re: [ModularSynthPanels] Re: CGS65 Questions....
2008-03-29 by mcb, inc.
... Correct. I ve a picture I ll try to upload somewhere... -- Monty Brandenberg
Re: [ModularSynthPanels] Bridechamber Thomas White sequencer panel?
2008-03-29 by Scott Deyo
Oh, I forgot to thank Scott Juskiw and of course Larry : ( Scott Deyo The Bridechamber contact@bridechamber.com www.bridechamber.com
Re: [ModularSynthPanels] Bridechamber Thomas White sequencer panel?
2008-03-29 by Scott Deyo
I m game. Would Thomas mind if I stole his X/ Y s ? ... I must say, I do appreciate how much thought and work goes into the panels that I shamelessly exploit.
[ModularSynthPanels] Re: CGS65 Questions....
2008-03-29 by Mark
I just started my coffee, and haven t built my cgs65 at all, but I m still thinking that you would only need one 330K resistor between the signal grid and the
Re: [ModularSynthPanels] Bridechamber Thomas White sequencer panel?
2008-03-29 by David Moylan
I would love to see this panel. Dave
Bridechamber Thomas White sequencer panel?
2008-03-29 by andrewlistmayer
Hey Scott, I was just wondering if you ever considered doing a run of panels for Thomas White`s rotary MFOS step sequencer? I decided to make this question
Re: CGS65 Questions....
2008-03-29 by basdbg963
... Since I m building one this evening, thought I d follow up. There is a bit of voodoo. It looks like Ken intends for pin 4 of the tube to be at the same
Re: [ModularSynthPanels] Re: CGS Frac panels?
2008-03-29 by kwote uno
thanks for those. i ve seen you re site before. nice stuff on there. i m going for drums first. my next project after the dual chime will be the dual drum and
Re: CGS Frac panels?
2008-03-29 by data2action
i ve got frac panels for the euro steiner filter and the tube VCA on my site: http://www.fluxmonkey.com/fluxGear.htm i ve got a few more floating around
Re: MOTM480R Panel from Will and Bill
2008-03-29 by wjhall11
Really sorry, guys. I m all thumbs. Fixed it - and rhe page title too. Bill