arrow buttons flaky, sudden jumps to osc 1 screen
2009-08-12 by Michael Hale
For some reason my andromeda has gotten kind of flaky - the up and down arrow buttons don t always work, and sometimes the screen will randomly jump to the
Messages
Browse messages
Page 3 of 21 · 1043 messages matched
power on issue, hangs
2009-08-03 by rwlarow
just bought the andromeda, amazing synth! one issue i notice with my unit is that it sometimes takes several powercyles to boot the unit. on another forum im
Re: Used Alesis Ion
2009-08-03 by rwlarow
... i paid 350 for mine
RE: [Andromeda_A6-ION] Andromeda screen replacement and a bit of a rant...
2009-07-28 by equity 7
Hi, Ok this was the part that was confusing me. Thanks for the clarification! ... _________________________________________________________________ Attention
Re: [Andromeda_A6-ION] Andromeda screen replacement and a bit of a rant...
2009-07-15 by Guillaume Marier
Each mix channel uses the corresponding voice output, like mix channel 1 uses out 1 and so on, they are hard wired and there s no way to get channel 1 to be
RE: [Andromeda_A6-ION] Andromeda screen replacement and a bit of a rant...
2009-07-15 by equity 7
That s exactly what I meant - where is the setting to route monophonic instruments to specific voice outputs? I also think it would have been nice to include a
Re: [Andromeda_A6-ION] Andromeda screen replacement and a bit of a rant...
2009-07-15 by Guillaume Marier
IMHO, the individual outputs are only relevant in MIX mode. This way you can record and apply external effects to each patch individually. It s also only
RE: [Andromeda_A6-ION] Andromeda screen replacement and a bit of a rant...
2009-07-15 by Numina
I think the point with the multiple outs is for use in multi-mode and having different sounds routed to respective outs... sync up an outboard sequencer and
RE: [Andromeda_A6-ION] Andromeda screen replacement and a bit of a rant...
2009-07-15 by equity 7
... This reminds me of something I ve been meaning to ask the list for awhile - what are some good uses for the individual outputs? I made room for them on my
Re: [Andromeda_A6-ION] Andromeda screen replacement and a bit of a rant...
2009-07-15 by Numina
... Interesting. No, in fact I have always felt the knobs were the most solid I ve had compared to any of my other synths. Mine don t wobble at ALL. ... The
Re: Andromeda screen replacement and a bit of a rant...
2009-07-15 by Russ Hoffman
... noise/hash that is present in the audio signal, it is very obvious on some bass sounds - a kind of halo of noise that surrounds the signal. Just a dumb
Andromeda screen replacement and a bit of a rant...
2009-07-15 by fireballxl27
Hi, New member here - I just recently acquired an Andromeda. At the moment I have mixed feelings about it. For such an expensive synth, I m fairly appalled at
Re: [Andromeda_A6-ION] Re: A6 issues; patches not changing, screens switching, etc...
2009-03-23 by James Pound
Box it up, ship it across the country and back to yourself. It will probably work fine. something about that vibration riding on the UPS truck seems to fix a
Re: A6 issues; patches not changing, screens switching, etc...
2009-03-23 by Mike Thompson
This is similar to the problem we re experiencing. We are now noticing that when you just tap a certain pot, the lights on the front panel just go nuts. Also
Ion Manual
2009-03-11 by Heruka2
Is there any German Manual or a tutorial for the ALESIS ION in circulation?
Re: [Andromeda_A6-ION] Andromeda A6 - Question about Pan Control
2009-03-05 by Colin Chung
Maybe doing a hard reset might fix it as detailed here http://www.wohmart.com/a6/Using_A6_Public2.doc I know this fixed my modwheel, where it wasn t returning
Re: Andromeda A6 - Question about Pan Control
2009-03-04 by Eduardo Saponara
There is a reset mode that calibrates all the controls and buttons, try a few of the reset procedures first. Good to see you here David, Good luck with the
Re: Andromeda A6 - Question about Pan Control
2009-03-04 by sunnypedaal
... might well be that your in/out board is damaged.
Andromeda A6 - Question about Pan Control
2009-03-04 by David Kronemyer
The pan control on our A6 is biased; to center the main output L-R it s necessary to set it to about 9:00 (rather than straight up as one might think). Has
Re: Used Alesis Ion
2009-03-03 by synthartist69
... Sorry I thought you were asking about an Andromeda. An Ion should be between $400.00 and $450.00 plus shipping.
Re: Used Alesis Ion
2009-03-03 by synthartist69
... About $2,000 to $2,200 for one that is perfect. Add another 50.00 to 100.00 for shipping and insurance.
Re: Used Alesis Ion
2009-03-03 by infiniteprint
... Between 350 and 425 is normal based on condition,pedals,manuals,cases Soft or hard,and shipping. I own an Andromeda and Ion and the condition is A+ on
Used Alesis Ion
2009-03-02 by Arwid Hennig
How much do I have to pay for a used Alesis Ion?
Re: [Andromeda_A6-ION] RE: andromeda filters--weak? --comments wanted
2009-02-27 by Colin Chung
Using a small amount of filter feedback can really enhance the filters, especially the resonance go to this site and read all my tips and tricks
Re: [Andromeda_A6-ION] RE: andromeda filters--weak? --comments wanted
2009-02-27 by Colin Chung
well the filters will sound different I have a minimoog, jupiter 8, and a juno 106 here, and they all sound different filter wise in a good way. Even though
Re: andromeda filters--weak? --comments wanted
2009-02-26 by sunnypedaal
by combining the different filter possibilities, especially the postfiltermix section, one can create some real nice filtersound. however , i think it s more
RE: andromeda filters--weak? --comments wanted
2009-02-26 by Javier Zubizarreta
I have to strongly disagree. I did comparisons between the A6 and various serious analogue synths and it really have an excellent sound. You can hear a
andromeda filters--weak? --comments wanted
2009-02-26 by wasteking1
i have a half dozen diffrent synths and recently got an AndromedaA6...I fought my way through the manual and much about it is amazing but i find that the
Re: A6 issues; patches not changing, screens switching, etc...
2009-02-23 by synthartist69
I bought one with a similiar problem. The main screen suddenely changes to edit screens, not any particular one. I haven t received the synth yet. The first
Re: A6 Service Manual posted on this site
2009-02-18 by sunnypedaal
afcourse i ment: redownload, instead of reupload. ( must be dyslexia) by the way another source to download: http://www.zshare.net/download/532740173c0e00bb/
Re: A6 issues; patches not changing, screens switching, etc...
2009-02-18 by tmste76
What I found on the Service Manual about my problem: Chapter: Knobs Jitter or Don t Reach Maximum Value or Don t Work ° Make sure the ribbon cable going from
Re: A6 Service Manual posted on this site
2009-02-18 by sunnypedaal
... i doubt the problems, seems some computers are not configered properly. on all remarks regarding unpacking or reading problems it seems a problem of
Re: A6 Service Manual posted on this site
2009-02-18 by tmste76
I m the one who uploaded the BOM. So if you have any problems write me. Stef
Re: [Andromeda_A6-ION] A6 Service Manual posted on this site
2009-02-18 by Leo & Lydia
Re: A6 Service Manual posted on this site
2009-02-18 by sunnypedaal
... no problem here, think might have something to do with your pdf reader or other config. fr.gr.
A6 Service Manual posted on this site
2009-02-18 by ududidj
HI, It seems that the A6_1 and the BOM pdf files in the files section are corrupted. Any chance whoever posted those here could re-post? thanks.
Re: A6 issues; patches not changing, screens switching, etc...
2009-02-17 by tmste76
Thaks Bob, I trust you a lot. So You think my knobs jittering may be solved with your 2 advices: verify all power supply voltages are what they need to be and
Re: [Andromeda_A6-ION] Re: A6 issues; patches not changing, screens switching, etc...
2009-02-17 by Bob S.
Too bad....I gave you 2 things to try and you didn t listen to a word of my recommendations..... (I m only an electrical engineer for over 30 years that works
Re: A6 issues; patches not changing, screens switching, etc...
2009-02-17 by tmste76
I m trying reparing my Andromeda too. My problem consist in knob jittering, so whee a patch is on, it starts changing values by itself. I uploaded in the files
Re: A6 problems
2009-02-17 by Stefano Pazzano
I m trying reparing my Andromeda too. My problem consist in knob jittering, so whee a patch is on, it starts changing values by itself. I uploaded in the files
Re: [Andromeda_A6-ION] A6 issues; patches not changing, screens switching, etc...
2009-02-12 by Bob S.
Your guess is right, you have a cold or broken solder joint or a power issue. I would verify all power supply voltages are what they need to be and are clean,
A6 issues; patches not changing, screens switching, etc...
2009-02-12 by Mike Thompson
Hello, I joined the group because I am trying to repair an A6 for a friend that was bought used, and was having an issue where the screen would just change in
Re: A6 plastic end panels
2008-12-10 by wasteking1
... wrote:Yes thats the one ... make ... they ... are ... i
Re: A6 plastic end panels
2008-12-10 by wasteking1
... anyone ... wooden ... just ... there ... pryed ... their
New file uploaded to Andromeda_A6-ION
2008-12-05 by Andromeda_A6-ION@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Andromeda_A6-ION group. File :
Re: [Andromeda_A6-ION] A6 plastic end panels
2008-12-05 by fj canton
Hi. Try here: http://www.instrumentalparts.com/ala6ansppa.html Each End Side Cap, cost about 25.50.
Re: [Andromeda_A6-ION] A6 plastic end panels
2008-12-05 by Bob S.
Is that the one that was on EBay a couple of weeks ago? Bob El Segundo, CA ... From: wasteking1 To: Andromeda_A6-ION@yahoogroups.com Sent: Thursday, December
A6 plastic end panels
2008-12-04 by wasteking1
i have just gotten an A6 with broken plastic end panels...does anyone know of a source for factory replacements, or should i just make wooden
Re: "Kraftwerk in Concert" event in Calendar
2008-11-04 by this_is_ra
Seems like there could be a bug in Yahoo groups or something; don t worry about it Mila. -Ra ... ago, I don t even ... concert dates!!!? ... Calendar post,
Re: "Kraftwerk in Concert" event in Calendar
2008-10-16 by mila123x
... _____________________________________________________________________________________ Hi, You All: This is very disturbing to me, as my last post here was