Alesis Andromeda A6

i have just gotten an A6 with broken plastic end panels...does anyone 
know of a source for factory replacements, or should i just make wooden 
ones....furthermore, how are the plastic ones atached ? are they just 
press fit into the 8 little holes in the metal chassis ends?  are there 
hidden screws? It seems like they would just shatter totally if i pryed 
them off...[maybe that's what the previous owner tried hence their 
broken state]  any comments ?

Hi.

Try here:

http://www.instrumentalparts.com/ala6ansppa.html

Each End Side Cap, cost about 25.50.


--- "Bob S." <tttsystems@...> escribi\ufffd:

> Is that the one that was on EBay a couple of weeks
> ago?
> 
> Bob
> El Segundo, CA
> 
> 
>   ----- Original Message ----- 
>   From: wasteking1 
>   To: Andromeda_A6-ION@yahoogroups.com 
>   Sent: Thursday, December 04, 2008 3:53 PM
>   Subject: [Andromeda_A6-ION] A6 plastic end panels
> 
> 
>   i have just gotten an A6 with broken plastic end
> panels...does anyone 
>   know of a source for factory replacements, or
> should i just make wooden 
>   ones....furthermore, how are the plastic ones
> atached ? are they just 
>   press fit into the 8 little holes in the metal
> chassis ends? are there 
>   hidden screws? It seems like they would just
> shatter totally if i pryed 
>   them off...[maybe that's what the previous owner
> tried hence their 
>   broken state] any comments ? 
> 
> 
> 
>

--- In Andromeda_A6-ION@yahoogroups.com, "Bob S." <tttsystems@...> 
wrote:
>Yes thats the one
> Is that the one that was on EBay a couple of weeks ago?
> 
> Bob
> El Segundo, CA
> 
> 
>   ----- Original Message ----- 
>   From: wasteking1 
>   To: Andromeda_A6-ION@yahoogroups.com 
>   Sent: Thursday, December 04, 2008 3:53 PM
>   Subject: [Andromeda_A6-ION] A6 plastic end panels
> 
> 
>   i have just gotten an A6 with broken plastic end panels...does 
anyone 
>   know of a source for factory replacements, or should i just make 
wooden 
>   ones....furthermore, how are the plastic ones atached ? are they 
just 
>   press fit into the 8 little holes in the metal chassis ends? are 
there 
>   hidden screws? It seems like they would just shatter totally if i 
pryed 
>   them off...[maybe that's what the previous owner tried hence 
their 
>   broken state] any comments ?
>

--- In Andromeda_A6-ION@yahoogroups.com, "wasteking1" 
<wasteking1@...> wrote:Yes thats the one
>
> --- In Andromeda_A6-ION@yahoogroups.com, "Bob S." <tttsystems@> 
> wrote:
> >Yes thats the one
> > Is that the one that was on EBay a couple of weeks ago?
> > 
> > Bob
> > El Segundo, CA
> > 
> > 
> >   ----- Original Message ----- 
> >   From: wasteking1 
> >   To: Andromeda_A6-ION@yahoogroups.com 
> >   Sent: Thursday, December 04, 2008 3:53 PM
> >   Subject: [Andromeda_A6-ION] A6 plastic end panels
> > 
> > 
> >   i have just gotten an A6 with broken plastic end panels...does 
> anyone 
> >   know of a source for factory replacements, or should i just 
make 
> wooden 
> >   ones....furthermore, how are the plastic ones atached ? are 
they 
> just 
> >   press fit into the 8 little holes in the metal chassis ends? 
are 
> there 
> >   hidden screws? It seems like they would just shatter totally if 
i 

> pryed 
> >   them off...[maybe that's what the previous owner tried hence 
> their 
> >   broken state] any comments ?
> >
>