Re: [Andromeda_A6-ION] FS: SRAM cards
2011-11-08 by andrew rodell
________________________________ From: andrew rodell To: Andromeda_A6-ION@yahoogroups.com Sent:
Messages
Browse messages
Page 2 of 21 · 1043 messages matched
Re: [Andromeda_A6-ION] FS: SRAM cards
2011-11-08 by andrew rodell
any more info and what the sounds are ? is a few 2 cards? thanks, andrew ________________________________ From: dougt55 To:
FS: SRAM cards
2011-11-04 by dougt55
Hi, I have a few SRAM cards available for use in the Alesis Andromeda and QS series. They are 2MB cards and are $55 shipped. Thanks, Doug synthparts.com
Updation ION Operating Question
2011-08-16 by Gregory
Hi, I ve recently purchased an Alesis ION and really like this instrument. I have also discovered that the synth has the original operating system installed
RE: [Andromeda_A6-ION] Digest Number 550
2011-04-01 by Steve Hays
an easy work around i ve found is when recording run local/midi and then switch to midi for playback when done. triggers immediately always. From:
RE: [Andromeda_A6-ION] Digest Number 550
2011-04-01 by el macaco
I find that Background tuning can make the A6 sluggish if you have a lot of other modulations going. I think it s just because it is constantly retuning
Re: Digest Number 545
2011-03-30 by plattendorf
I don t know why there wold be keyboard latency, but background tuning doesn t put any drag on the processor. The algorithm is only 4 assembly lines long...
Red ones
2011-03-30 by rbrtfls
It s been awhile but I ve seen the red faced Andromeda A6 and was wondering if anyone in the group has one. Also, Andymix has a wondeful light kit added to his
FS: SRAM Cards
2011-03-30 by dougt55
Hi, I have a few SRAM cards available - 2MB (holds 8 prog banks) $75, 1MB (4 banks) $55, and 512KB (2 banks) $40. Thanks, Doug
ALESIS ION
2011-03-23 by marcobravo
Hello people, I am looking for a source for more custom patches for the Alesis ION. Can anybody help? Thanks very much.
Greetings
2011-03-19 by Marco Bravo
Looking forward to learn more about the ion. Sent from Yahoo! Mail on Android
Re: [Andromeda_A6-ION] Digest Number 545
2011-02-15 by Steve Hays
Sweet will do Stephen D. Hays Managing Member 120dB Film Finance, LLC 75 Mill River Road South Salem, NY. 10590 Mobile 646.872.1293 Office 914.533.5241 Fax
RE: [Andromeda_A6-ION] Digest Number 545
2011-02-15 by el macaco
Try disabling background tuning, that is a constant drag on the processor. I never have it enabled and I have never had the problem you describe. Give it a
RE: [Andromeda_A6-ION] Re: keyboard latency
2011-02-14 by Steve Hays
thanks! i ve found a work around in setting the midi connection to local/midi instead of just midi. this way no latency when playing/recording. for playback
Re: keyboard latency
2011-02-14 by rbrtfls
I had some issues w/my Andy as well. But remember, it s an analog and sometimes the instrument gets a little quirky. And because of the analog path there are
Tremendous
2011-02-14 by rbrtfls
Hi, I think this is one of if not the best analogs out there. I ve an Andromeda, a MemoryMoog Plus,2 Roland Junos and SE-1 and an OB-8. I think that the Andy
-- If this one ... --
2011-01-14 by atmosfere_sonore
Doesn t inspire u to make space music i do not know what will :-) http://www.esa.int/images/M31_andromeda_H.jpg Pix taken by Herschel-Plank of galaxy Andromeda
keyboard latency
2011-01-13 by slimtome
anyone ever have a problem where a patch works fine but w/out making any parameter changes, it starts lagging the keyboard, and then for no apparent reason
Re: New file uploaded to Andromeda_A6-ION
2010-08-16 by misterphoneman .
Hello, I was just curious if these 14 banks you posted were a reorganization of the original patches (plus perhaps the 5 extra banks supplied by Alesis) or
[Andromeda_A6-ION] Opening the Andromeda
2010-07-19 by el macaco
Hi, It s not hard to open you might want to do it on a soft surface like a bed or something. Here is an electro music post with instructions and pictures of
Re: Services
2010-07-17 by herfvotch
Hi, I never tried. not sure if this help : http://nonsolosynth.blogspot.com/2008/09/alesis-andromeda-customized-by.html
Services
2010-07-17 by bob.weeks@btinternet.com
I need to open my A6 and check the connections. Every time I tap the top panel to the right of the display all the values start changing and all the pots fail
New file uploaded to Andromeda_A6-ION
2010-06-11 by Andromeda_A6-ION@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Andromeda_A6-ION group. File :
new to andromeda group
2010-06-01 by simon reed
Hi
FS: 2MB SRAM Cards (6 Prog Banks + 4 Mix Banks)
2010-05-20 by dougt55
Hi, I have a few more 2MB SRAM cards for sale for $70 + shipping. Each card holds 6 Program Banks + 4 Mix Banks. Thanks, Doug
Re: power on issue, hangs
2010-04-19 by davenoz16
Hi . It was a while ago now , but when I got my Andromeda I had the same problem .I sent it back and Some of the Hardware (main board) I think was replaced .
Re: Sub oscillator volume problem
2010-04-17 by davenoz16
Thanks Russ . Enjoy your weekend
Re: [Andromeda_A6-ION] Re: Sub oscillator volume problem
2010-04-16 by Russell Hoffman
Ok, I hear what you mean now. Yes, that s VERY noticeable in the MP3. I will try to reproduce this on my A6 next week when I have a chance. I have guests
Re: Sub oscillator volume problem
2010-04-16 by davenoz16
Hi Russ . P.s. Heres the link lol http://electro-music.com/forum/viewtopic.php?t=38597
Re: Sub oscillator volume problem
2010-04-16 by davenoz16
Hi Russ , If I do turn it up its still very noticable . Just easier for other people to hear it this way because on some voices the sub will completely
Re: [Andromeda_A6-ION] Sub oscillator volume problem
2010-04-16 by Russell Hoffman
... Dave, I haven t tried this, but I bet if you increase the sub volume a little above just audible the effect will be less noticeable. My guess is all A6 s
Sub oscillator volume problem
2010-04-16 by davenoz16
Hi I have a problem with my sub oscillators volumes changing on different voices . If you are reading this post you could try and replicate this on your A6 by
Re: [Andromeda_A6-ION] User group
2010-04-16 by Russell Hoffman
You have our attention! :-) Russ
User group
2010-04-16 by Dave Norris
Hi Im sending this email so as I can speak to people in the A6 user group ? Hi Im sending this email so as I can speak to people in the A6 user group ?
Re: [Andromeda_A6-ION] Re: S-Ram Questions
2010-04-07 by Russell Hoffman
http://www.memoryx.net/andromedaa6.html I don t know if they still stock it, but a call to them might turn up a lead on where to buy one. I paid $40 for mine
Re: S-Ram Questions
2010-04-07 by fish2fish21227
... The S-Ram card does have a battery. I can t tell you exactly what battery unless I remove it from the card. I bought a used card and replaced the battery
Re: Did the Andromeda get discontinued?
2010-03-14 by Ra
It is sad to hear from you guys that the A6 is discontinued, but I am not surprised after it has been neglected for so long, and they did not put out any
Re: [Andromeda_A6-ION] Re: Did the Andromeda just go discontinued?
2010-03-12 by Russell Hoffman
... I hope this does not bode ill for future repair possibilities. My A6 works great, but I hope it can be repaired in the future if something should happen to
Re: Did the Andromeda just go discontinued?
2010-03-12 by netherfabrik
Yes, it is true -- they are done. This is via several retailers who were hoping to get one last order...but after several months delay, Alesis came back and
Did the Andromeda just go discontinued?
2010-03-11 by t0msw1ft
I m just wondering if all the rumors are true about the Andromeda going discontinued, can anyone confirm this?
ribbon controller questions
2010-03-10 by monroeeskew
Hello. Thinking about buying an Andromeda. A few questions about the ribbon: 1) Can you program it so that touching the ribbon gates an envelope on one of
LCD and dark blue panel
2010-02-21 by fm_xtk
Hello, I am new to the list and have a couple of questions: I d like to change the green LCD to a blue one but can t find any info on how to do this and what
RE: [Andromeda_A6-ION] Re: Menu navigation without rotating the pots ?
2010-02-07 by equity 7
Hi there, When you are controlling the Andromeda from an external source, it is possible to program data increment memories to any value that can be triggered
Re: Menu navigation without rotating the pots ?
2010-02-03 by yekuku
Thanks for clarifying this and suggesting a workaround Michael ;) It is a shame that they stopped updating the OS so soon, they could have added this useful
Re: [Andromeda_A6-ION] Menu navigation without rotating the pots ?
2010-02-03 by Michael Schultz
I don t think that works. Your closest workaround is to set the knobs to passthrough in the GLOBAL- PANEL menu. Not a great workaround. Tricky indeed when
Menu navigation without rotating the pots ?
2010-02-02 by yekuku
Hi guys, I just got an A6 and I am having some trouble navigating through the menus. I just wanna make fine adjustments by using the UP & DOWN buttons without
New file uploaded to Andromeda_A6-ION
2009-09-28 by Andromeda_A6-ION@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Andromeda_A6-ION group. File :
Knob jittering
2009-08-17 by Stefano Pazzano
I had the same problem. It s almost never dued to bad pots. Calling the Alesis Service, they told me it s quite common and in most of cases is dued to the big
Re: arrow buttons flaky, sudden jumps to osc 1 screen
2009-08-12 by this_is_ra
I was about to say that flickering and weird behavior is caused by bad pots (which the knobs turn). In my case, it was the mod pot. Try to ensure that it is
Re: arrow buttons flaky, sudden jumps to osc 1 screen
2009-08-12 by Michael Hale
Ah, starting it up in diagnostic mode (holding down button 2, I see that the OSc 1 semitone pot is jittering - I m not necessarily the most electronically