speaking of sh-101's...
2006-04-06 by Jamie Shields
hi everyone: the previous post about sh-101¹s got me thinking about mine. sorry i can¹t help on the pitch bender situation but i have another problem
Messages
Browse messages
Page 111 of 155 · 7723 messages matched
SH-101
2006-04-06 by alpha5000dk
Hi everybody! Yesterday I finally got me a Roland SH-101. Nice little beast I think ;-) Unfortunately the pitch bender is broken and needs replacement. Has
repairing my Korg BX3
2006-04-06 by jim
Hi all ! I own an old Korg BX3 organ (the babe is near 30yrs old...) and have some trouble with the digitasts switches of the lower kbd. I project to change
Re: perhaps useful to some
2006-04-06 by rakky
Thanks for this info. It actually confirms something I ve been doing for a while: Boss Dr-55 drum machines often will not play back, and behave oddly in
Re: [vintagesynthrepair] perhaps useful to some
2006-04-06 by Gareth Jenkinson
hey chris, thanks for this. i m pretty new to repairing, confident with a soldering iron from years of making up guitar leads etc but lacking an electronics
perhaps useful to some
2006-04-04 by chris_nairn
http://www.oldcrows.net/~oldcrow/synth/tips.txt
perhaps useful to some
2006-04-04 by chris_nairn
http://www.oldcrows.net/~oldcrow/synth/tips.txt
Damaged Solina
2006-04-04 by kozmigroover
I ve added a few photos in an album to show the damage. Once again - any advice on how to make it look as good as new, would be gratefully received! Thanks,
Tuning issue with Juno 6
2006-04-04 by Alan Sisley
Hi I have just acquired a Juno 6 and find that the pitch is over a full tone flat. I can get it to play in tune by using the transpose key, but then I find it
Damage to wooden end block / veneer on Solina String Ensemble
2006-04-04 by kozmigroover
Hi there, I recently bought a Solina which works perfectly but was damaged during shipping. It was obviously dropped on one end, and a three inch corner of
Re: [vintagesynthrepair] Unsubscribe
2006-04-01 by Dale Kay
see email below you name... ;-) dale band web pages Inquisitor Betrayer http://www.inquisitorbetrayer.com Angel s Wings http://www.soundclick.com/angelswings
RE: [vintagesynthrepair] Unsubscribe
2006-04-01 by Brian Davies
Hi Andy If you read any posting you will find how to unsubscribe listed at the bottom of each message. Regards Brian G3OYU www.g3oyu.co.uk _____ From:
Unsubscribe
2006-04-01 by andy bell
Please cancel my subscription to this group. Thank You.
Re: [vintagesynthrepair] jupiter 8 factory patches
2006-03-31 by Jamie Shields
i¹m not sure but if it¹s anything like the juno 106 tape load (which was 2 years later) it¹s a slow tape load. not sure of the baud... -J ... Re:
Re: [vintagesynthrepair] jupiter 8 factory patches
2006-03-31 by Jamie Shields
will do. thanks. -J
Re: [vintagesynthrepair] jupiter 8 factory patches
2006-03-31 by Ricardo Verschut @ Jura Music Production
Hi there, Here s my suggestion: You could join the Roland Jupiters group on Yahoo (http://launch.groups.yahoo.com/group/Roland_Jupiters) to get access to the
Re: [vintagesynthrepair] jupiter 8 factory patches
2006-03-31 by Dale Kay
Isn t this about a 300 baud tape load? or is it a little bit faster? dale band web pages Inquisitor Betrayer http://www.inquisitorbetrayer.com Angel s Wings
Re: [vintagesynthrepair] jupiter 8 factory patches
2006-03-30 by Jamie Shields
thanks, paul! -J
Re: [vintagesynthrepair] jupiter 8 factory patches
2006-03-30 by Paul Rak
Here you go...
Re: [vintagesynthrepair] Re: 80C85 CPU - still current?
2006-03-28 by Antoine Deschênes
Jameco has 80C85s for sale.
Re: [vintagesynthrepair] Re: 80C85 CPU - still current?
2006-03-28 by GB
... That s the radiation hardened version and is probably different in other ways too. GB
Re: [vintagesynthrepair] Re: 80C85 CPU - still current?
2006-03-28 by John Brewer
The safest way to get a dud CPU out is to cut all the pins as close to the CUP as possible then take the pins out one at a time by heating the pin from the
Re: 80C85 CPU - still current?
2006-03-28 by mark_r_abcd
... memory ... make sure ... Hmm, good thought. There are some pull-up resistors in a SIL package that got a fairly good covering of battery gunk. I ll do some
Re: [vintagesynthrepair] Re: 80C85 CPU - still current?
2006-03-28 by Peter Bye
Do a search on E-Bay. There is a mother board with a working one for about $15.00 plus S&H. Also, do a google search. Regards; Peter
Re: [vintagesynthrepair] Where can I find MoogProdigy switch-caps?
2006-03-28 by Sandra Garcia
have you tried ranger audio? Sandra Garcia
Where can I find MoogProdigy switch-caps?
2006-03-28 by korgfetischist
Hi, anybody an idea where i can find these white caps that cover the Prodigy-switches? thanks thomas
Re: 80C85 CPU - still current?
2006-03-28 by gil_we
I think there is a great chnace you can still get it (I know these type of parts are still in use on some student projects etc.) ... be ... the CPU ... address
Re: [vintagesynthrepair] korg minikorg 700s / k2 replacement keys !! (cross-posted)
2006-03-27 by John Brewer
Try www.wdgreenhill.com he has a picture gallery of all the different keys he stocks. John. ... From: Tim Glasgow To:
Re: [vintagesynthrepair] korg minikorg 700s / k2 replacement keys !! (cross-posted)
2006-03-27 by Tim Glasgow
... ...and i need a G! And yes, it seems these keys are used all over the place. My Moog prodigy has the same ones! --t [london, canada]
Re: [vintagesynthrepair] Re: ARP AXXE needs repair, Seattle area
2006-03-27 by dizz@elitemofo.com
Hi Michael, That s great to know. If you re not already, you should be listed over at the Odysseypatch group. regards, dizz
korg minikorg 700s / k2 replacement keys !! (cross-posted)
2006-03-27 by robert andrew scott
hi. has anyone got any idea where to find replacement univox minikorg 700s / korg k2 keys? i ve heard a rumor that they re the same keys as on the ms series
Re: [vintagesynthrepair] 80C85 CPU - still current?
2006-03-27 by John Brewer
Is the 80c85 the cmos version of the 8085? if so they should still be around. Just a thought, if the address and data lines are changing, the CPU could be ok
Re: ARP AXXE needs repair, Seattle area
2006-03-27 by transanalog
Hi. I just moved to Seattle and have been repairing analog synths for years. I ve been doing free-lance work for The Trading Musician so you need a reference
Re: [vintagesynthrepair] 80C85 CPU - still current?
2006-03-26 by GB
... You might want to test to the continuity between the CPU and the memory chips for all the data/address/control lines and at the same time make sure there
Re: [vintagesynthrepair] 80C85 CPU - still current?
2006-03-26 by Antoine Deschênes
You can find 8085 CPUs, but some are a little bit different so try to stay with the same brand and model number. Jameco has a 80C85. You can try it if you
80C85 CPU - still current?
2006-03-26 by mark_r_abcd
Hi again all, You may remember I asked about a Korg Poly 800 with damage from a leaking battery a few weeks ago. Well, the bicarb and toothbrush technique has
ARP and other synth repairs
2006-03-26 by Roy J. Tellason
I used to be one of two ARP service centers in PA before they went out of business... Also was authorized for Moog, and Korg, Ensoniq, Roland, and a whole
Re: [vintagesynthrepair] ARP AXXE needs repair, Seattle area
2006-03-26 by dizz@elitemofo.com
Oooops! I m sorry I just noticed they don t have the Axxe listed as a synth that they repair. You could also try synthfool.com although I believe he s booked
Re: [vintagesynthrepair] Re: Jupiter 6 tape?
2006-03-26 by GB
... fair. www.digikey.com or any electronics place can sell you a 3.6v lithium battery which I think is what s in the JP-6. Have a look at it. Replace with
Re: Re: Jupiter 6 tape?
2006-03-25 by Thomas B. Nast
First, thanks for all the answers re the tapes. The primary question was whether there were such things for the Jupiter. Now knowing there were, I did find
Re: [vintagesynthrepair] ARP AXXE needs repair, Seattle area
2006-03-25 by dizz@elitemofo.com
Hi Dan, Broken synths really suck don t they? I have my Odyssey opened up right now to replace a couple sliders that wouldn t clean up and work properly.
Re: [vintagesynthrepair] Re: Jupiter 6 tape?
2006-03-25 by Roy J. Tellason
... The Batteries Plus chain seems to have that equipment as well. Though if it were me doing the repair, I d be inclined to solder in a holder and not
ARP AXXE needs repair, Seattle area
2006-03-25 by dannoherzog
Hi -- Does anyone happen to know of someone qualified to repair my Arp Axxe -- ideally in or near Seattle? Some of the sliders can only be moved with
Re: [vintagesynthrepair] Re: Jupiter patches
2006-03-25 by Jamie Shields
thanks bob! -J
Re: Jupiter patches
2006-03-25 by bob hanna
FYI: Roland JP-6 & 8 factory patches, among others... http://analog.no/patch/
Re: [vintagesynthrepair] wurlitzer mini-shocks
2006-03-25 by Jamie Shields
thanks, michael. will check it. -J ... Re: [vintagesynthrepair] wurlitzer mini-shocks thanks, michael. will check it. -J I had something like that happen to me
RE: [vintagesynthrepair] wurlitzer mini-shocks
2006-03-25 by Michael Casino
I had something like that happen to me too! It was a ground problem from one thing to the next. If you pop the top off, look at every screw that touches metal.
jupiter 8 factory patches
2006-03-24 by Jamie Shields
hi: i recently picked up a jp8 and would love to get my hands on the original set of patches. can anybody recommend a place to do just that? thanks in advance,
wurlitzer mini-shocks
2006-03-24 by Jamie Shields
hi everyone: i¹m new to the board but i¹m a long time vintage synth collector and long time vintage synth player. i have a problem that i¹m hoping my fellow
Re: [vintagesynthrepair] Re: Jupiter 6 tape?
2006-03-24 by Tom Remi Flygel
try to google for it. Usually these tapes are just a few seconds worth of screeching sound, so in many cases they are sampled and can be found as wav files.