Re: [vintagesynthrepair] Ensoniq Fizmo service manual
2006-12-29 by Merlin Zener
... While you re at it, does anyone know of a service manual for the Ensoniq MR-rack? Any help would be appreciated... -- Merlin Zener piano, synthesizer.
Messages
Browse messages
Page 102 of 155 · 7723 messages matched
Ensoniq Fizmo service manual
2006-12-29 by maschinengeist001
Hi! Anyone knows where I could buy a copy of the Service Manual (NOT the Owner s - or Operation as Ensoniq called it - Manual). Thanks in advance
Re: Help! (emu b3)
2006-12-27 by ferrograph632
... cords along with tapping and wiggling connections. All without positive results.
Re: [vintagesynthrepair] Re: Arp Omni I (Model 2483 - s/n 24832071)
2006-12-21 by Keith Gramlich
Thank you. Good insight here! There is one problem though and it comes from my description of the problem and for that, I m sorry! The problem. now that I go
Re: [vintagesynthrepair] Install
2006-12-21 by Renato Gomes
I don´t have the floppy disks, but I have the boot loader, OS 5.01 and new objects. I just need the install instructions. Does someone have it? Thanks! ...
Re: [vintagesynthrepair] Install
2006-12-20 by Russell Rose
absolutely. do you have kdfx install floppy disks? advise, R%uss ... absolutely. do you have kdfx install floppy disks? advise, R%uss On Dec 20, 2006, at 6:16
Install
2006-12-20 by Renato Gomes
Hi!! Does someone have the install guide for KDFX they could send to me? I have a K2500RS and I´m trying to install this KDFX board. Thanks! Hi!! Does someone
Re: Arp Omni I (Model 2483 - s/n 24832071)
2006-12-20 by lordofthesynths
... wrote: The Omni and the Omni-2 are the same - there is one EG for the synth. Playing a key re-triggers any keys that are already pressed -
Help!
2006-12-20 by adamalts111
I have a E-mu B-3 that has stopped working. Iv e tried changing cords along with tapping and wiggling connections. All without positive results. If anyone has
Re: [vintagesynthrepair] M-147
2006-12-19 by John Brewer
Hello again Paolo Here is one source. Organservice.com 920-028630-000 Custom IC: 13 Note Pedal Latch & TOS, M147 38.00 They may have data on this chip or at
Re: [vintagesynthrepair] M-147
2006-12-19 by John Brewer
Hello again Paollo This seems to be a very versatile board you are working on. I Googled your chip number and came up with this....... Quote. A pedal tone
M-147
2006-12-19 by zaph632002
Hello listers, first of all, thank you for the help some of you gave me in looking for info about the TMS3615 chip now I have a new quest: does anyone know
Re: [vintagesynthrepair] Help With Yamaha SY22
2006-12-19 by Russell Rose
Know what you mean, for what its worth. The sy series keybeds keys seem to only stand up for so long. on Tuesday the F4 key got lazy and then Wednesday the B3
RE: [vintagesynthrepair] Help With Yamaha SY22
2006-12-19 by José Pereira
Hi: My choice would be to buy a complete SY22 or SY35 and keep the old one for parts. These nice keyboards sell cheap at www.ebay.com. I use a TG33 in my
Re: [vintagesynthrepair] Roland XP-10 battery problem
2006-12-19 by PeWe
Hi Alex ! Normaly, after changing a battery, you have to perform a memory-reset and to load the patches again . PeWe ... From: aeharris25 To:
Re: [vintagesynthrepair] Help With Yamaha SY22
2006-12-18 by James Richmond
Hiya, best suggestion is find another one on ebay and use your existing one for parts. I ve done this with my SY22-I paid $120 for the last one I bought. James
Help With Yamaha SY22
2006-12-18 by Daniel Cowans
Does anyone know where I can get a good keyboard with working keys for a Yamaha SY22? It s been repaired so many times over the years and now I just want a
Roland XP-10 battery problem
2006-12-18 by aeharris25
Hi, I am having problems with my Roland XP-10. After receiving the Battery Low message flash across my screen, I proceeded to change out the internal
Re: Matrix 6R - only Left/Mono output works...
2006-12-18 by gil_we
Thanks ! ... for the ... on for
Re: [vintagesynthrepair] Arp Omni I (Model 2483 - s/n 24832071)
2006-12-18 by Keith Gramlich
Interesting. I wouldn t have thought the envelope would retrigger. I guess that means the Omni I has one central EG where as the Omni II has individuals? I ve
Re: [vintagesynthrepair] Matrix 6R - only Left/Mono output works...
2006-12-17 by vco3@aol.com
HI the matrix6 is not a true stereo instrument. The right output is for the other side sound of a split in split mode, stereo switch has to be on for this
Matrix 6R - only Left/Mono output works...
2006-12-17 by gil_we
My Matrix 6R has a strange problem - no matter which preset you select, with both Stereo option ON and OFF, only Left/Mono channel works. On headphones, on the
Re: [vintagesynthrepair] Arp Omni I (Model 2483 - s/n 24832071)
2006-12-17 by no.freq@free.fr
This seems to be normal for the Omni-1, as the enveloppes retrigger every time you hit a new note. To solve your problem, it seems like you d need to get an
Arp Omni I (Model 2483 - s/n 24832071)
2006-12-17 by Keith Gramlich
Hi all, I have the captioned instrument with a problem. It seems to work fine, but all notes trigger everytime I hit a key. Let s say I have a F,A, C chord
Re: [vintagesynthrepair] Roland jx-8p
2006-12-17 by no.freq@free.fr
Hi, does this really happen randomly, or something like every time you played something like 6 or 8 notes (whatever the notes...) ? A demultiplexer (surelly a
Roland jx-8p
2006-12-17 by letcista
Hi group. I m searching for a pdf file of the service manual for the roland JX-8p. My JX-8p has the following problem: - When I select a program which uses a
Rolad RS-505 Service Notes
2006-12-17 by oxygeno1313
Hi all, I m looking for Roland RS-505 Service Notes, i have some other manuals for trade, i been looking for this manual at the internet but no one have it. I
Re: [vintagesynthrepair] Re: 4082c dual opamp equivalent ?
2006-12-16 by no.freq@free.fr
Don t know if you already have it but the schematics should help : http://www.tcapp.com/pub/synths/oberheim_heaven/matrix6/docs/ (quite bad quality, but you
Re: [vintagesynthrepair] Re: 4082c dual opamp equivalent ?
2006-12-16 by no.freq@free.fr
So, if it s an 8 pin dip one, this could be a LM741... ! If you re not sure, try to do some minor reverse-engineering, it may be quite easy finding out the
Re: 4082c dual opamp equivalent ?
2006-12-16 by gil_we
Thanks, Well, I found that it is not the opamp. Actually, aside from the 4053, there s also an IC tagged C741C in at the same circuit - would that one be
Re: [vintagesynthrepair] 4082c dual opamp equivalent ?
2006-12-16 by no.freq@free.fr
Hi, You d better use a TL082 instead of the 072. You ll usually find that the right replacement op amps will end with the same numbers. Concerning the 4053, I
4082c dual opamp equivalent ?
2006-12-16 by gil_we
Hi all, I m trying to fix my OB Matrix6R, on which the left channel doesn t play. The last stage is a NEC C4082C dual opamp (datasheet attached to Files
AW: [vintagesynthrepair] Yamaha CS-30 EG3
2006-12-16 by Oliver Abplanalp
sounds very like a defect. my cs-30 does not behave like this (the eg3 should work like you know it from other synths). i cannot verify your problem with my
Re: Looking for Kurzweil 1000PX Programs
2006-12-15 by lamboguy
Hi Francois, I have several 1000PXs and I just love them, especially the Grand Piano patch. I can t help you, but somebody in this Yahoo group can:
Re: Kurzweil MicroPiano problems
2006-12-15 by lamboguy
Thanks Scott, let me play around with it and see what I can find. It s been a couple of years since I looked at it -- I remember trying a lot of things back
RE: [vintagesynthrepair] Kurzweil MicroPiano problems
2006-12-14 by Scott Nordlund
... Typically this isn t caused by a hardware issue, probably all sounds are generated on a single IC, if something goes wrong it just all dies at once rather
Looking for Kurzweil 1000PX Programs
2006-12-14 by babouche369
Hi there, I got a Kurzweil 1000PX, and unfortunately I reset the internal RAM erasing all the programs. Does someone have a sysex or mem dump of the original
Kurzweil MicroPiano problems
2006-12-13 by lamboguy
Hi All, I have a Kurzweil MicroPiano that used to play great, then one day it started sort of swallowing notes -- it s lost a bunch of voices so that now
Re: [vintagesynthrepair] Re: Roland D-50 : self-control issues
2006-12-13 by Russell Rose
ahah. Yanking the battery is usually my last ditch effort when all else fails. Carry On. Russ
Wanted: D-50 bender
2006-12-13 by lastritesdf
Hi everyone. My D-50 s bender seems dead. Roland used to carry a replacement unit for it named PB-18 . If anybody s got one of these for sale, please drop me
Re: Roland D-50 : self-control issues
2006-12-13 by Daniel Araujo
Thanks Russ, I checked that before I disassembled the keyboard. Unfortunately that wasn t the case. But here s an update: after reading some posts on LA users
Rhodes Super Satellite amp
2006-12-12 by David
I m looking for ANY amp for the Rhodes Super Satellite speaker system. I am needing the amps only, working or non-working, the master and or the slave. Thanks
Re: [vintagesynthrepair] Roland D-50 : self-control issues
2006-12-12 by Russell Rose
try this, Get to the screen for midi function. Go to the local on / off and turn it to ON. Voila. Russ
Re: Yamaha CS_20_M
2006-12-12 by sputnik979
anybody?...
Roland D-50 : self-control issues
2006-12-12 by Daniel Araujo
Hi folks. I ve been part of this list for a couple of years now but I don t think I ve ever posted here. I m not a pro technician, just the kind of guy who
Re: [vintagesynthrepair] Re: Yamaha CS-30 EG3
2006-12-11 by Miguel Mendoza
Thanks a lot Duncan, I really apreciate your help. ... From: ferrograph632 To: vintagesynthrepair@yahoogroups.com Sent: Monday, December 11, 2006 3:10 PM
Re: Where to Order parts and components for a Roland XP-50?
2006-12-11 by sergeidave
Thanks Guys!! I appreciate your help! ... Angeles. ... service ... ViewSellersOtherItems&userid=chipforbrains&ssPageName=STRK:MEFS:MESOI ...
Re: Yamaha CS-30 EG3
2006-12-11 by ferrograph632
... CS-30? I m not sure if it s working properly here. When assigning it to the VCAs, the synth doesn t emit any sound. If I assign it to the VCF I can notice
Looking for roland mouse
2006-12-09 by golfmusicheel
Looking for the roland mouse that came with roland samplers or can one be made ?
Re: [vintagesynthrepair] Where to Order parts and components for a Roland XP-50?
2006-12-08 by Russell Rose
No brainer.You can order all your parts from Roland US in Los Angeles. You do not have to be a dealer or servicer. Their customer service dept is outstanding.