Korg EC5 to Roland FC-100 compatibility
2007-01-30 by Scott Davies
I just picked up a Roland FC-100 foot controller pedal and am curious if it could be used with Korg products (eg.Prophecy) in place of the Korg EC5 foot
Messages
Browse messages
Page 101 of 155 · 7723 messages matched
Kurzweil K1200 PRO / Parts and service manual
2007-01-29 by glcontact
Hello, I just received a Kurzweil K1200 PRO version with a broken key. I tested and depress the sensor under this key and it does not trig a sound. Others keys
Re: [vintagesynthrepair] Lead-free solder `~~`
2007-01-29 by Antoine Deschênes
Well, you can t use Pb-Free solder where lead was used before, and shouldn t use lead on stuff using lead free solder. New Pb-Free components with lead
Lead-free solder `~~`
2007-01-29 by Casio Rapman
Has anyone here had good luck with lead-free solder? A friend of mine used some of the stuff and said it caused some serious problems. He had to desolder
Multivox Schematics? `~~`
2007-01-29 by Casio Rapman
Does anyone have a good source for Multivox schematics, preferably free or low cost? Thanks! _________________________________________________________________
Re: what value is this capacitor of ?
2007-01-29 by gil_we
it is found to be a 1MHz ceramic resonator, thanks
what value is this capacitor of ?
2007-01-27 by gil_we
look at photo album under gil_we is it 1uf or 10uf ? other ? Thanks
replacement for pratt reed key assembly
2007-01-26 by jgatdfg
hello, does anyone know of an off the shelf replacement for the pratt reed keyboard suitable for a sci pro-one? or perhaps some crafty mod to reduce the
Yamaha TX802 EG trouble
2007-01-26 by Mu
So I dusted off a TX802 rack module and it seems to have a very odd response on the Envelope Generators: Notes die too soon, and at irregular intervals. The
CRB Voco-String distorted
2007-01-24 by korgfetischist
Hi, I have problems with my CRB Diamomd Voco-String. The vocoding section is fine (with external sounds) but the synthesizer can only play one note. If a
Re: Minimoog Rubber Bushings Source
2007-01-23 by oxygeno1313
Hi Ralph i found a place on the net http://www.imt.net/~sounddoctorin/synthtec/parts/key.htm go at the bottom of the page... you ll find the key bushings very
Minimoog Rubber Bushings Source
2007-01-23 by Detko, Ralph: OS_TDO
Hi Folks, I need to obtain a set of replacement rubber bushings for my minimoog keyboard. Would someone please be able to provide me with a link where I could
for sale Korg microkorg
2007-01-23 by Gerry
looking to sell the korg microkorg synth, with vocader, great condition only surface scatch. e-mail me an offer I have to move. Gerry grw2002@hotmail.com
Yamaha RX5 Drum box w / latin percussion cartridge
2007-01-23 by Gerry
this has all controls for each sound, you can program any pattern you need, play pads on the surface in real time. midi in/out and threw great condition. offer
RE: [vintagesynthrepair] Polysix nonlinear gain phenomena...two boards that do t
2007-01-17 by Scott Nordlund
... Sounds like an op amp (or transistor) might be bad. Check the power on the chorus board as well, just to make sure it s not the source of the problem.
RE: [vintagesynthrepair] Roland AXIS Keytar
2007-01-17 by Scott Nordlund
... You could probably figure it out fairly easily by testing the output of the power supply, and peeking inside the Axis to find out which is what. It s
Polysix nonlinear gain phenomena...two boards that do this!
2007-01-17 by Robert Weigel
Must be a common problem. Here s a cut/paste from my previous post to sdiy. Hopefully someone can help. he schemos in part are pretty horrible I have for
Re: Moog Opus 3 help !
2007-01-17 by Robert Weigel
There s usually a wealth of information about things like this on my www.imt.net/~sounddoctorin/synthtec page. I think there might even be a pointer to a
Roland AXIS Keytar
2007-01-17 by Phil Heaven
Hi, I have an AXIS-1 and the power suppy (which I guess is even more rare than the keyboard). Problem is I can t find the interconnect cable that goes between
Re: SCI Prophet 5 display flicker
2007-01-16 by easterleggs
My Prophet 5 display flicker/lockup problem has been solved! When replacing the LM337 voltage regulator I noticed that the screw and nut that connects the
Moog Opus 3 help !
2007-01-16 by oxygeno1313
Hi all, I have a Moog opus but i m not sure if something are failing, the test is : BRASS section : VARIABLE position MIX to VCF : middle position Articulator
Re: Hammond Aurora Century 222122K
2007-01-13 by Steve
Hello Keith. Thanks for your reply. Unfortunately I don t have a service manual for it but I ll check out the edge connectors first, as you suggested, and let
RE: [vintagesynthrepair] Re: Hammond Aurora Century 222122K
2007-01-12 by Keith Niver
It s most likely NOT the build in the swell pedal as this would affect the entire organ if it was out, and not just the pedals. It s most likely either bad
RE: [vintagesynthrepair] Re: Hammond Aurora Century 222122K
2007-01-12 by Keith Niver
It s most likely NOT the build in the swell pedal as this would affect the entire organ if it was out, and not just the pedals. It s most likely either bad
MKS-80 Battery replacement
2007-01-10 by slowalan
I think I should replace the battery on my Roland MKS-80, as I have read they can leak and damage the circuits.(Although everything works well to date). Before
Re: [vintagesynthrepair] Re: Hammond Aurora Century 222122K
2007-01-09 by Jez
Try replacing the light bulb in the swell pedal.
Re: Hammond Aurora Century 222122K
2007-01-08 by Steve
Hiya David. Thanks for your reply. I did in fact post to the Hammond Zone on the 28th December. I know it was probably not a good time to do it, but there have
Re: Hammond Aurora Century 222122K
2007-01-05 by balderson04
Hi, Steve: You might direct your question to the Yahoo Hammond_Zone group: many very knowledgeable Hammond enthusiasts there and they ll probably be able to
Hammond Aurora Century 222122K
2007-01-02 by Steve
Firstly, hello and a Happy New Year from a new member !! Sorry to kick off with a problem on my first posting here, but I am really needing some assistance.
RE: [vintagesynthrepair] Re: MKS-20 distortion
2007-01-02 by José Pereira
Hi again, Bob. Thanks for your sugestion. It did solve the problem! Audio is now always clean and MKS20 is ready to return to the rack. The relay is the RL1 in
RE: [vintagesynthrepair] Re: MKS-20 distortion
2007-01-02 by José Pereira
Thanks for your ugestion, bob. I ll try it and inform you of the results. Best regards. José Portugal _____ De: vintagesynthrepair@yahoogroups.com
Re: Peculiar ARP Axxe problem in the filter...
2007-01-02 by synthwookie
PS I found another problem right away. I d already tried socketing all the Transistor arrays and replacing them since I ve seen them be a problem in the past
Peculiar ARP Axxe problem in the filter...
2007-01-02 by synthwookie
I m scoping signal coming in and the buss for modulations. Both clean. No matter what mod setting there is a huge pop unless I turn the cutoff all the way
Re: Arp Omni I (Model 2483 - s/n 24832071)
2007-01-02 by synthwookie
I have one that, on release of bass notes, triggers the lowest C :-). It s..kind of cool such that I actually had some things I was doing where it worked
Re: Yamaha CS_20_M
2007-01-02 by synthwookie
... I have two CS-20M s at the moment. One working and one was until a MUX blew up right as I was demo ing it to a guy w/cash in hand!! In portland..so I had
Re: how cold before your equipment gets ruined
2007-01-02 by synthwookie
Yup good advise. I currently am in Montana and it s fairly dry here usually but gets real cold. I set up a portable studio with a rack of MKS7, 10, 30 and a
Re: MKS-20 distortion
2007-01-02 by synthwookie
Hi, I m new to the group. This is a common problem. There s a relay that gets dirty in there. Find the relay in the middle somewhere of the board as I recall
(no subject)
2006-12-31 by Jim Boyd
Well, I would like to wish everyone on my e-mail list a very Happy New Year, and may 2007 be a better year that 2006. I pray that you, put God first place in
Re:how cold before your equipment gets ruined
2006-12-31 by Thomas B. Nast
Storing gear in such an environment doesn t sound like a good idea. It wasn t designed to tolerate such conditions; for example, plastic parts may contract
Re: how cold before your equipment gets ruined
2006-12-31 by ferrograph632
sunlight is much worse than cold, but beware of damp, especially if the instrument has any exposed metalwork (like if the paint has started to come off a
Re: Ensoniq Fizmo service manual
2006-12-31 by maschinengeist001
Hi I ve already checked with them. They don t have the service manual. ... of gear, they don t always have everything listed so you may have to Email them if
MKS-20 distortion
2006-12-31 by letcista
Hi group: I dealing with a problem with my Roland MKS-20. When I play hard on the master keyboard, the audio outputs (balanced, unbanlaced and phones) on the
Wanted: Old Style Yamaha DX7 Volume Pedal
2006-12-31 by Michael Bacich
I need one of the old ones that worked on the original Yamaha DX7 -- not the newer FC7 type. Please email me with an asking price.
Re: [vintagesynthrepair] how cold before your equipment gets ruined
2006-12-30 by Dale
plastic, rubber parts etc.. not so sure they don t weather in such a place as you say .. sunlight being a nasty thing to both for sure.... dale Inquisitor
how cold before your equipment gets ruined
2006-12-30 by Gerry
I have my equipment in a storage place that does not have climate control. I have keyboards, roland guitar synths, effect pedals, guitar procssors. tascam
how cold before your equipment gets ruined
2006-12-30 by Gerry
I have my equipment in a storage place that does not have climate control. I have keyboards, roland guitar synths, effect pedals, guitar procssors. tascam
Farfisa SyntAccordion service Manual
2006-12-30 by gatmezeiz
Hi! Does anybody know a place from where I could get the service manual for my Farfisa Accordion? of course, the electrical parts :). Or at least somebody, who
Re: [vintagesynthrepair] Ensoniq Fizmo service manual
2006-12-30 by mishon66@aol.com
Try www.Route66studios.com they seem to have service docs for tons of gear, they don t always have everything listed so you may have to Email them if you don t
Re: Ensoniq Fizmo service manual
2006-12-29 by maschinengeist001
For the Ensoniq MR Rack service manual http://www.syntaur.com/manuals.html#service
Roland DR-5 Service manual
2006-12-29 by maschinengeist001
I am still looking for the Roland DR-5 service manual. Anyone got it? Or knows where I can buy it (I ve seen a guy on eBay selling one xeroxed for $20... Too