Re: Old slider pot
2004-11-09 by Clive
Thanks Rory, Your a star!!! I can t believe that I was on Panasonic s site today looking at capacitors for work, the numbers all started EV... but the penny
Messages
Browse messages
Page 6 of 12 · 570 messages matched
RE: [oldsynths] Old slider pot
2004-11-09 by Paddock, Toby
I can t add anything useful, but if Old Slider Pot was a brand of whisky, I d buy it. Toby
Re: [oldsynths] Re: Old slider pot
2004-11-09 by Rory Mc Donald
Hi: That is a Panasonic part number- here is a link to a pdf describing how to read the part number:
Re: Old slider pot
2004-11-08 by Clive
Hi Eric, I had thought about contacting Roland, but discounted the idea due to the age/value factor. Another avenue to try though. I wish I hadn t wasted the
Re: Old slider pot
2004-11-08 by Clive
Hi Masada, Boy you re quick off the mark....again :-) I will start looking down that road immediatley. Many thanks, Clive. ... (Log) ... to ... 2MA ...
Re: [oldsynths] Old slider pot
2004-11-08 by Eric Fusebox
Hi! Have you contacted Roland directly? I ve found that eventhough they might not actually have the part, they should be able to point you toward an Official
RE: [oldsynths] Old slider pot
2004-11-08 by Michael Casino
I think they mean 2 Meg-ohms wit an audio taper. Mike Hi All, I need to replace a slider in an old piece of kit and I can t seem to find a manufacturer
RE: [oldsynths] Old slider pot
2004-11-08 by masada wilmot
Off the top of my head I think that it s most likely a 2Mohms Audio (Log) taper pot. Probably manufactured by ALPS. mw ... From: Clive
Old slider pot
2004-11-08 by Clive
Hi All, I need to replace a slider in an old piece of kit and I can t seem to find a manufacturer let alone anything else. I hope you don t mind me asking you
Re: [oldsynths] OT-Financial Advisor
2004-10-23 by rorymcd@mac.com
Sorry if I offended anyone on this list- I have found that I like to deal with people I have some affiliation with, so that is why I posted. I put a obvious
Re: [oldsynths] OT-Financial Advisor
2004-10-23 by Eric Fusebox
Touting for business in this list, even if it s marked [OT], is low. SPAM is bad enough in Yahoo! Groups, let alone from so-called moderators. Sheesh! Not
OT-Financial Advisor
2004-10-23 by ascii_me
OFF TOPIC Just a note to let the OLDSYNTHS members in the Southern CA area know that in addition to being the Moderator of the list, I am also a licensed
RE: [oldsynths] Re: Noisy Rogue
2004-10-10 by masada wilmot
Hm... I wondered about the Rogue since I have a Prodigy with the Japanese keyboard unit and I always thought that no Prodigy came with the Pratt-Reed keyboard.
Re: Noisy Rogue
2004-10-10 by Clive
Hi Masada, Thanks for the fast response, I thought that before I place an order for the bushings that I d better check, just as well that I did. The keyboard
De-non tips? was Re: Best way to desolder chips?
2004-10-10 by ballendo
Excellent reply. Thank you! Ballendo ... desoldering. I ... blowgun kit. ... they ll last ... older ... hotter ... 450C. ... liquid ... not to ... tip/tube
Re: [oldsynths] De-non tips? was Re: Best way to desolder chips?
2004-10-10 by The Old Crow
I like the 1.5mm (that is the hole size) tip for general desoldering. I use the thin 1mm tip for SMD rework, along with the hot air blowgun kit. If you
RE: [oldsynths] Noisy Rogue
2004-10-09 by masada wilmot
Sounds like bad rubber bushings. Check out: http://pw2.netcom.com/~arcsound/ There was another supplier (Highspies, quite a bit cheaper that arcsound) but they
Noisy Rogue
2004-10-09 by Clive
Afternoon everyone, I have been the proud owner of a Moog Rogue for more than 20 years, since I started putting a modular synth together I have used it much
De-non tips? was Re: Best way to desolder chips?
2004-10-09 by ballendo
Crow, I bought one of these years ago at a flea market in silicon valley. The man had two, one with a tip, and the other without. Thinking the tips would be an
Re: CEM 3340 and 3360 ICs
2004-10-07 by bbluthang
try motm http://www.synthtech.com/
CEM 3340 and 3360 ICs
2004-10-06 by toorglick
Greetings, Does anyone know where I can get a few CEM 3340 and 3360 ICs for my ailing P600? The 3340 being most critical. Thanks, Rich
Re: [oldsynths] Best way to desolder chips?
2004-09-16 by Rory Mcdonald
How about using a heat gun, like is used to shrink wraps for RC airplanes? Rory ... Regards, Rory McDonald The best (and most expensive) way is to get
Re: [oldsynths] Best way to desolder chips?
2004-09-13 by The Old Crow
The best (and most expensive) way is to get something like the Den-On SC7000Z: http://www.howardelectronics.com/den-on/sc7000.html I bought one several years
Moog on History Channel
2004-09-13 by Bill Sautter
FYI... A program called History s Lost & Found aired a few days ago on the history channel (I don t know if it s aired before or if/when it will again). It
Re: [oldsynths] Best way to desolder chips?
2004-09-13 by KA4HJH
... An expensive desoldering station probably works like a charm. I ve never had the pleasure of using one. ... This is the slowest but safest way, especially
Re: [oldsynths] Best way to desolder chips?
2004-09-13 by Bob Weigel
Many swear by solder wicks...but I ve never gotten the technique. A heat gun with proper tip is usually the best I think. Solder suckers (the $6.00 type with
Best way to desolder chips?
2004-09-13 by rorymcd@mac.com
Hi: Can someone advise the best way to desolder chips from a circuit board? I am working on my CS-60 and want to replace 40xx chips with new, but dont want to
Re: Jupiter 6, please HELP!!!
2004-09-06 by Sam Ecoff
... I don t have the answer for you, but there have been quite a few questions from other Jupiter 6 owners in the past couple of days on the Analque Heaven
Jupiter 6, please HELP!!!
2004-09-06 by Miguel Mendoza
Hello I m a new JP6 user, please, could anyone tell me step by step how to save new presets in the Jp 6? I just bought it and it doesn t seem work properly as
FA: Roland VP330 Vocoder Plus MK1
2004-09-04 by mritenburg
I had to go to ebay with this one: http://cgi.ebay.com/ws/eBayISAPI.dll? ViewItem&category=64386&item=3746411543 Thanks! Matthew
Siel Orchestra
2004-09-03 by Michael Menedetter
Hi out there! I m looking for informations about the Siel Orchestra . Esp. I m interested in schematics and/or service-manuals. The owner manual is not the
FS: Tons of old synths
2004-09-01 by mritenburg
Hi All, I revised my gear sale after some sales fell through. I apologize to the folks that wanted to buy one or two modules from me. I am only selling the
OT - FOR SALE MUSIC GEAR
2004-08-19 by ascii_me
Hi all: Here are some items I am clearing out: 1. MIXER RACK $200 Innovative Design ODYSSEY mixer rack (No it is not for an Arp). Has 12 tilted top spaces and
korg dw8000 output distortion
2004-08-18 by Shayne Cafferata
a crippled dw8000 was recently passed on to me. at first i thought it was the key contact problem i read about, but further inspection revealed that within the
CS-80 group
2004-08-15 by David Rogoff
Hi all! About a week ago I started a Yahoo group just for the Yamaha CS-80 (and its close relatives). If you re as CS-80 owner or just a fan, please take a
Re: Yamaha CS-50 / Basic Troubleshooting Methods?
2004-08-11 by zendenker
Thanks for the response Crow, it was very helpful. As it turns out the light under the keyboard was burned out. Also, I didn t realize just how hard you need
Need repair help for the Wavestation
2004-08-09 by rorymcd@mac.com
I have a Korg Wavestation that appears to work fine with one exception- the keys dont trigger any sound in the area of middle C to the octave below. I am not
World's Largest Moog Modulars?
2004-08-09 by Bill Sautter
I m researching very large Moog modular systems (100+ modules, current and/or former systems) for an article, and would like to track down the [former] owners.
Re: [oldsynths] Yamaha CS-50 / Basic Troubleshooting Methods?
2004-08-09 by The Old Crow
It sounds like that voice card has a broken octave select circuit. They call it the transposition gating circuit in the service manual. My offhand guess is
Re: Yamaha CS-50 / Basic Troubleshooting Methods?
2004-08-09 by bbluthang
hi you can find an owners manual here http://www2.yamaha.co.jp/manual/english/download2.php no schematic tho. the touch sensitivity is not quite a regular
Yamaha CS-50 / Basic Troubleshooting Methods?
2004-08-05 by zendenker
Hi all, Please keep in mind I m new to troubleshooting and repairing vintage synths, also I have posted a similar msg to other groups, so I apologize for any
OT- FOR SALE IN SO CAL AREA ONLY- MIXER ROLLING RACK
2004-07-25 by Rory Mc Donald
Hi Again: Here is another item for sale: ODYSSEY Mixer/Effects rolling rack by Innovative Design. This is a rolling rack, covered in grey carpet, that has
OT: FOR SALE- TASCAM DA38
2004-07-25 by ascii_me
I have a VERY NICE condition Tascam DA38 for sale. Comes with the manual. This is the 8 track digital recorder that uses Hi-8 tape. The quality is great and
Q about DOD delay pedals...
2004-07-22 by edncori
Hi y all... I have a q on the DOD delay pedals (DFX-9, 94, etc.) My next step will be to open one up and tweak away to see what they do but I was wondering if
Re: [oldsynths] SH-101 Help Please !
2004-07-07 by Mike Schultz
Howabout the trimpot in there for PWM calibration or pulse width (VR2?). I have an Odyssey whose 50% duty cycle was more like 10% because of this. Just an
Re: [oldsynths] SH-101 Help Please !
2004-07-07 by Rory Mc Donald
Maybe a bad capacitor? synths that old often have leaky caps. I am not a repair guy but something to check... Rory McDonald Oldsynths Moderator
SH-101 Help Please !
2004-07-07 by oxygeno1313
Hi, I have a Roland SH-101, but the SQUARE wave output sounds very tiny compared with the SAW and SUB OSC output, i had the same problem with a SCI Pro-One
Re: [oldsynths] Re: mg-1 input filter mod success/need slider knobs
2004-07-01 by Ed Edelenbos
I d put in a warning about chipsfor... he finally came through but only after 3 or 4 months of harping on him to do so (for some cems). If it were me, I d
Re: mg-1 input filter mod success/need slider knobs
2004-07-01 by fishjaco
i need about 6 slider knobs for the mg-1. anyone have a parts machine or know where i can get some? i d even go with ... Chipsforbrains has them on ebay. they
Another 1v/Oct Question- SH-1000
2004-06-30 by Mike Walters
So does a Roland SH-1000 put out 1v/Oct? I don t think it has a CV out, but internally is this its standard? THanks Mikee