Tunning an OB-XA
2005-03-28 by cohete222000444
Hello all, I m trying to tune a voice on my OB-XA, and I would apreciate much your help. The problem is that the voice stays in tune in low frequencies but 2
Messages
Browse messages
Page 5 of 12 · 570 messages matched
Re: [oldsynths] Digest Number 194
2005-03-07 by Jim Combs
eBay lists new bender assemblies for the Juno-106 all the time. Just search on Juno 106. -Jim www.touchxtone.com
Roland Juno-106
2005-03-06 by djbrow54
I m restoring a Juno-106 which was missing one of it s voices. I was lucky and it was in the digital control circuitry. However, the bender module has some
SSN-engraged Moog & modules
2005-02-25 by Bill Sautter
Dear Moogers/analogers, I, and Roger Arrick of Synthesizers.com, both own some of the Moog modules with the 056-26-#### Soc. Sec. No. of some guy from New
korg ms-03 for sale.
2005-02-24 by Bakis Sirros
hello all, i m thinking of maybe selling my korg ms03. it is in very good condition, never used. i bought it one year ago from a friend but never used it at
New poll for oldsynths
2005-02-22 by oldsynths@yahoogroups.com
Enter your vote today! A new poll has been created for the oldsynths group: If possible, which ONE of the following synthesizers would you most want to own? o
Synths used by Kraftwerk?
2005-02-19 by jp8synth
Hi everyone! I was wondering if anyone happens to know what synthesizers Kraftwerk used on their Computer World album? I have been scouring the web looking
Wanted: Moog 962 Sequential Switch
2005-02-19 by Bill Sautter
Hi all. I need to find a Moog 962 Sequential Switch for a modular system, preferably in working order, but as is is OK. I know there are good, new
OB-8 Potentiometers
2005-02-14 by zendenker
Greetings all, I m an OB-8 owner that suffers from a few scratchy/glitchy pots. Not a huge problem, but it does prevent me from recording smooth manual sweeps.
Re: [oldsynths] Yamaha CS15 manual needed.
2005-02-02 by ankh@tele2.it
Hi dear friend, you could find CS15 owner manual at follow address: http://www.yamaha.co.jp/manual/english/index.php I don t know where you could find the CS
Yamaha CS15 manual needed.
2005-02-02 by phaeton777
I m looking for both the owners manual and service manual for the Yamaha CS15. Any help would be greatly appreciated. Cheers, Rick.
Re: WTB: replacement knob for Korg MS-10 or 20 etc.
2005-01-16 by Marvin Kaye
HI again, Richard, I ve been kicking around the idea of molding up some other (non- musical) parts for awhile, and this little episode has finally pushed me
Re: [oldsynths] Re: WTB: replacement knob for Korg MS-10 or 20 etc.
2005-01-16 by RMC
Marv You and I are in the same boat - we need something idiot-proof if we want to mould our own. I reckon the only way I can do the insides of my Korg knob is
Re: WTB: replacement knob for Korg MS-10 or 20 etc.
2005-01-16 by Marvin Kaye
Hi RMC, I saw your post about the missing knob on your Korg. I wish I was writing you with good news, like I have one for you, but alas, that is not the case.
WTB: replacement knob for Korg MS-10 or 20 etc.
2005-01-15 by RMC
Hello All I need to get one of the MS-10 or MS-20 large knobs (small style will do at a pinch), as used on the VCO waveform select or filter cut-off etc. If
Re: Paia OZ d sharp = d note problem
2005-01-14 by Marvin Jones
Hmmm. Interesting one indeed. Your analysis seems sound. If the top octave D s are OK, then your 50240 is OK. Double check for solder bridges on the group of
Paia OZ d sharp = d problem
2005-01-13 by fishjaco
I m using every resource I can find to find help with or a solution for this problem. I apologize to any one who may be annoyed that I have posted this
SEQUENTIAL CIRCUITS ----- SPLIT EIGHT ----- SPLIT-8
2005-01-12 by oxygeno1313
Hi, I m looking for factory presets for a SCI SPLIT-EIGHT, mine loose all the presets because the battery is dead (60.8 mA). Please if someone have them let me
SEQUENTIA CIRCUITS ----- SPLIT EIGHT ----- SPLIT-8
2005-01-12 by oxygeno1313
Hi, I m looking for factory presets for a SCI SPLIT-EIGHT, mine loose all the presets because the battery is dead (60.8 mA). Please if someone have them let me
electro-music 2005
2005-01-09 by Bill Fox
Please forgive the cross post. I hope this interests most of you. Cheers, Bill ... Subject: [beyond_em] electro-music 2005 Date: Sat, 08 Jan 2005 11:13:07
UAF772LTC op amp - data sheet? Replacement?
2005-01-08 by toorglick
I can t find any info on the UAF772LTC op amp. Anyone have any idea where I may get a few of these or if there s a replacement available?
Re: re: yamaha g10/g10c
2005-01-07 by Shayne Cafferata
the 15-pin cable looks near impossible to find, but hey, look what i found! hooda thawt? http://groups.yahoo.com/group/g-10/ not terribly active but there are
Re: [oldsynths] re: yamaha g10/g10c
2005-01-07 by gamble gold
we ve been having network issues here which has kept me from answering the original question -- though, i m beginning to lose hope the i can do anything useful
Prophet 600 - one voice not happy
2005-01-06 by toorglick
Greetings, I ve been having fun restoring my Prophet 600. It needed many things repaired/replaced and I pretty much have it finished except for one issue:
re: yamaha g10/g10c
2005-01-04 by Shayne Cafferata
a midi cable is five pins. the reason i asked about the pins and configuration is because you may be able to find a substitute. for example the six pin cable
Re: [oldsynths] re: yamaha g10/g10c
2005-01-03 by gamble gold
thanks -- i ll work thru these tomorrow. don t know how many pins there are in the cable but it s way more than the number found in a midi cable (3, right?).
re: yamaha g10/g10c
2005-01-02 by Shayne Cafferata
i just checked my midi guitar bookmarks and all the g10 links are no longer active. try putting the question up on the midiguitar yahoo group list as well as
yamaha g10/g10c
2005-01-02 by gamble gold
i recently acquired a yamaha g10 midi guitar. what i didn t know when i bought the thing is that it uses a proprietary cable. what i d like to find is the
Help! EDP Wasp makes no sound...
2005-01-02 by Martyn Meere
Hi everyone, I recently got an EDP Wasp and I really love it but it suddenly has stopped making any sound. If I listen really close I still here the LFO going
Minimoog problems ... please HELP !
2005-01-01 by oxygeno1313
Hi, I bought a non working minimoog recently, i have a few questions about the transistor 2N4058. My minimoog serial dont have serial number, but the boards
Re: rogue key doubling
2004-12-20 by Mubo
FIXED! thanks so much for an informative bit of info and trouble shooting... the 2 bus information gave me exactly what i needed to know what to look for...
Frank Zappas Keyboards
2004-12-19 by rorymcd@mac.com
Frank Zappa s Modular keyboard controllers for sale: See link etc
Re: [oldsynths] Re: poly box (clone) wanted or help building one
2004-12-17 by mariano
Howdy y all; The polivox is basically a very high frequency vco running at around 2 Mhz (more or less) tied via a PLL (phase loocked loop ) to a Top Octave
Re: poly box (clone) wanted or help building one
2004-12-15 by Mike Walters
I couldn t find it in the files section! So, I ve always been intrigued by these, but never knew how they work exactly. They turn a monophonic signal
Re: rogue key doubling
2004-12-13 by Mubo
thanks for the info... i ll check it out and let you know what i find
rogue key doubling
2004-12-10 by Mubo
Hi there! was wondering if anyone has experienced this.... whatever the last note is that i played gets repeated when i press my middle c key .... i dont hear
Re: [oldsynths] rogue key doubling
2004-12-10 by klosmon
If this has the usual two-buss keyboard (with two contacts for each key: one for the note, and one to trigger), then it s likely that the note contact for
poly box (clone) wanted or help building one
2004-12-10 by Martyn Meere
Hi there, I am new to the group. I am looking for a EML PolyBox so if anyone wants to sell one, please email me at coolpad@btopenworld.com I saw that the
Re: Desoldering station for sale
2004-12-03 by David Rogoff
... work to do. Yep, I still have it. Let me know if you want it (you can email me - david@therogoffs.com)! David
Re: [oldsynths] Desoldering station for sale
2004-12-01 by Rory Mc Donald
Do you still have this Desoldering station available? I might be interested in picking it up, as I have a lot of board work to do. -Rory McDonald OLDSYNTHS
Desoldering station for sale
2004-12-01 by David Rogoff
I just finished replacing all the CMOS chips in my CS-80. I m done with my desoldering station, so I m selling it. It s a Weller Desoldering Rework/Repair
RE: [oldsynths] Re: Old slider pot
2004-11-20 by masada wilmot
Use 1 or 2 fixed value resistors in place of the slider. With 2 resistors you can pick your setpoint for the slider position. For a single resistor you can
Re: Old slider pot
2004-11-18 by Clive
Hi all, After following all of your good advice I got a reply from Roland: I have checked out the availability for this part unfortunately we do not have
Re: [oldsynths] New poll for oldsynths
2004-11-10 by Don't t(h)read on my tentacles, Earthlin
... I did it, no need to explain ;P And I counted my Emu 5000 ultra as EMU, It s a dead cutie too :((( Poll wise, maybe the right thing to do would have been
Re: [oldsynths] New poll for oldsynths
2004-11-10 by Bakis Sirros
hello, by Emu, you mean the Emu modular, the audity2000 and the morpheus and the drum machines only? because all the other emu machines are ROMplers and
Re: [oldsynths] New poll for oldsynths
2004-11-10 by Rory Mc Donald
MS-20 is a KORG-other Wasp/Teisco/Kawai can be listed as OTHER. I encourage you all to reply with your odds and ends! Even Roland :) Regards Rory McDonald
Re: [oldsynths] New poll for oldsynths
2004-11-10 by Rory Mc Donald
No reason- I just forgot/we can use the OTHER category for Roland. Considering I used to have a Roland JX8P, you think I would have remembered! Rory Oldsynths
Re: [oldsynths] New poll for oldsynths
2004-11-10 by Don't t(h)read on my tentacles, Earthlin
... rant wise, the nominated list is rather partial… ;) No wasp No MS20 No Teisco/Kawai No roland (these I don t have but…) And there s no Orgon Enigiser
Re: [oldsynths] New poll for oldsynths
2004-11-10 by Eric Fusebox
Umm...I was just wondering if Roland has been left out for any reason? oldsynths@yahoogroups.com wrote: Enter your vote today! A new poll has been created for
New poll for oldsynths
2004-11-10 by oldsynths@yahoogroups.com
Enter your vote today! A new poll has been created for the oldsynths group: Which of the following synthesizers do you currently own? Choose all that apply.