Re: [korgpolyex] Strange 800 problem: locked up, display error
2018-07-26 by zwright88@...
Hi Don, Thanks, but I m not sure that s it. I ve opened it up and the sequencer enable switch looks fine, can t see any obvious corrosion or other visible
Messages
Browse messages
Page 5 of 141 · 7050 messages matched
Re: [korgpolyex] Strange 800 problem: locked up, display error
2018-07-26 by <backshall1@...>
I had a similar problem once before. It was an extremely corroded sequencer enable switch. Don B. From: zwright88@yahoo.com [korgpolyex] Sent: Thursday, July
Strange 800 problem: locked up, display error
2018-07-26 by zwright88@...
Hi folks, I have a Poly 800 mk1 that has developed an odd problem. Upon switching it on, the display reads 1.7 50 01 , no sound is able to be produced other
Re: [korgpolyex] Re: Distorted Output
2018-07-08 by j.musil@...
I have v1.4, and PG58 has been correctly set to 1 all this time. I do hear the difference between the two values of PG58.
Re: [korgpolyex] Re: Distorted Output
2018-07-08 by support
Which version of the AtomaHawk kit do you have? If you have version 1.4, you need to set global parameter 58 to value 1. That version has surface mounted
Re: Distorted Output
2018-07-07 by j.musil@...
P.s. In my case the distortion was also eliminated by turning VR2 all the way down.
Re: [korgpolyex] Distorted Output
2018-07-07 by j.musil@...
Hi Mike, I also have an overdriven (sounding) output as described in an earlier post in this thread. I finally got time to have a look inside and the value of
Re: [korgpolyex] Re: Arpeggiator coming soon!
2018-06-29 by j.musil@...
Mike, that s exactly what I meant! I didn t explain it too well and you did some good parsing :) Would it be possible to have an additional option with
Re: [korgpolyex] Re: Arpeggiator coming soon!
2018-06-28 by charles chop
that s good ! the sequencer pot .for the arp speed ... On Thu, 6/28/18, support support@hawk800.com [korgpolyex] wrote: Subject:
Re: [korgpolyex] Re: Arpeggiator coming soon!
2018-06-28 by support
the sequencer speed slider or MIDI, whichever one you select for clock. You enter ARP mode by holding down Poly and then pressing Start . This starts the
Re: [korgpolyex] Re: Arpeggiator coming soon!
2018-06-28 by support
Q: chord memory? (or does it have already?) would that fall in same function area? future idea maybe... A: The ARP is not chord capable yet. But I am
Re: [korgpolyex] Re: Arpeggiator coming soon!
2018-06-28 by charles chop
what will set the speed of the arp? ... On Thu, 6/28/18, support support@hawk800.com [korgpolyex] wrote: Subject: Re: [korgpolyex]
Re: [korgpolyex] Re: Arpeggiator coming soon!
2018-06-28 by support
I think what you re asking for is a one shot ARP with first note on restart. Is that right? Basically, first note down triggers the ARP to play each note once.
Re: Arpeggiator coming soon!
2018-06-28 by Jason Musil
Joy! Will it be possible to have (a mode where) the arp cycle restarts on note onset regardless of any time source? E.g. In a jam situation with no midi clock,
Re: Arpeggiator coming soon!
2018-06-28 by domgoold@...
chord memory? (or does it have already?) would that fall in same function area? future idea maybe... bounce! there are 2 bounce modes, i think: to include all
Re: [korgpolyex] Arpeggiator coming soon!
2018-06-28 by charles chop
great ideal arpeg!!! any poliphany or key split with the hawk? inverted midi in ? key signature constrict micro tuning? I have some ideals I can program a
Arpeggiator coming soon!
2018-06-28 by support
Hello Poly fans, For all of your HAWK owners that have been waiting a long, long time for an arpeggiator, your long wait is almost over. I took the liberty of
Coming soon! - HAWK boot code will support PS-800/EX-800 tape load
2018-06-27 by support
Hello Poly fans, for those of you with HAWK d Poly s. I will be releasing new firmware soon that will allow loading of patch dumps from tape. It would be good
Re: [korgpolyex] Re: New Poly-800 joystick - the HawkStick
2018-06-06 by support
I guess there s a way to order it on there? Yes, there is! http://www.hawk800.com/joystick.php /MikeOn Wed, 2018-06-06 at 02:15 +0000, bperkins211@gmail.com
Re: [korgpolyex] Re: New Poly-800 joystick - the HawkStick
2018-06-06 by bperkins211@...
Well I d think the black plastic doohickey would be a Hawky Puck . ;-) I ll look for the kit on your site. I guess there s a way to order it on there?
Re: [korgpolyex] Re: New Poly-800 joystick - the HawkStick
2018-06-04 by support
Hawky Stick - I like that! Yes, it s ready. It had been available for a few months now. The black plastic doohickey that needs to sit flush with the front
Re: New Poly-800 joystick - the HawkStick
2018-06-03 by bperkins211@...
Any news about this mod? I wonder why it isn t called a Hawky Stick ... ;-) Anyhow, I may be refreshing my Poly800 soon.. fresh custom paint job for the
Hawk 800 Joystick Issue
2018-05-04 by iamthejoness@...
Hi guys, I installed the Hawk 800 quite a while ago (almost a year I think) and it works okay. One thing is that the joy stick stopped working when I got it up
Re: [korgpolyex] Re: New Poly-800 joystick - the HawkStick
2018-03-29 by support
There is already a joystick parameter edit mode. Which I am pretty sure almost no one uses. But maybe with the PS2 joystick and the click down switch it might
Re: [korgpolyex] Alternatives to Paypal
2018-03-29 by Steve Daniels
There are a few things that are similar to PayPal—but not as trusted. And most of them aren’t very popular (or active) in the US, which I know isn’t your
Re: New Poly-800 joystick - the HawkStick
2018-03-29 by domgoold@...
always liked the idea of the Playstation joystick for something. how about clickdown to enter edit mode? first click enters parameter select, second to
Re: [korgpolyex] Re: hawk-800 upgrade
2018-03-28 by charles chop
well was worth asking . thanks ... On Wed, 3/28/18, support support@hawk800.com [korgpolyex] wrote: Subject: Re: [korgpolyex] Re:
Re: [korgpolyex] Alternatives to Paypal
2018-03-28 by charles chop
I likew the classic bank draft..or a money order/// ... On Wed, 3/28/18, support support@hawk800.com [korgpolyex] wrote: Subject:
Alternatives to Paypal
2018-03-28 by support
Hello Poly fans, does anyone have any suggestions for alternatives that they prefer other than Paypal for making payments for stuff online? I am considering
Re: [korgpolyex] Re: hawk-800 upgrade
2018-03-28 by support
No, the code is entirely written around the 80C85 CPU that was used in the Poly-800. It took me several years of part time hobby activity to get the Poly done.
Re: [korgpolyex] Re: hawk-800 upgrade
2018-03-28 by charleschop@...
there is no way the hawk can be adapted for the dw6000/8000 I like the midi cc and and extra lfo it offers . could be very extra usefull on the 6000/8000 for
New Poly-800 joystick - the HawkStick
2018-03-28 by support
If you are one of the unlucky ones that has either a smashed Poly-800 joystick or it s just given up and those darn pots can t be replaced either by the way,
Re: [korgpolyex] Re: hawk-800 upgrade
2018-03-26 by support
I ve looked for some video of through hole pick and place machines but have come up with nothing BUT, I do distinctly remember seeing pick and place in the
Re: [korgpolyex] Re: hawk-800 upgrade
2018-03-26 by Gordonjcp
... Back in the 1980s I had a school holidays job assembling PCBs at the electronics company my dad worked for. We built up roughly eurocard-sized PCBs in a
Re: [korgpolyex] Re: hawk-800 upgrade
2018-03-26 by Michael Hawkins
I don t know but speculating... The production volume of the Poly was low compared to many other consumer products of 1982.The boards use many components that
Re: [korgpolyex] Re: hawk-800 upgrade
2018-03-26 by charles chop
anyone know ,?, were the ex800 hand made ? from what I remember from being inside once is ,it seemed they were. was a lot of long component axiles not cut back
Re: hawk-800 upgrade
2018-03-26 by bperkins211@...
My advice would be for someone who has problems getting that socket off is to take it to a local TV repair or other electronics repair shop and see if they
Re: [korgpolyex] hawk-800 upgrade
2018-03-25 by charles chop
you got my money..! lol glad to be aboard the hawk .. thank you very much Charles ... On Sun, 3/25/18, Michael Hawkins korgpolyex800@yahoo.com [korgpolyex]
Re: [korgpolyex] hawk-800 upgrade
2018-03-25 by Michael Hawkins
The HAWK is all through hole. The AtomaHawk has SMD and I put those on myself so you put the easy through hole parts on. So yes, you do the easy stuff. /Mike
Re: [korgpolyex] hawk-800 upgrade
2018-03-25 by Michael Hawkins
the phone number is usually just for international verification. But I really don t have many problems with anyone. Humans are generally an honest bunch. /Mike
Re: [korgpolyex] hawk-800 upgrade
2018-03-25 by charles chop
I guess my first question is the surface mount chips I see upon the atomic hawk and maybe the hawk,,, are they attached prior to shippping? then all the user
Re: [korgpolyex] hawk-800 upgrade
2018-03-25 by charles chop
wow : ) mikael u are a true genius !...thanks for taking time to write in... im a hack of sorts and have done much soldering , unsoldering,, pcb drilling,
Re: [korgpolyex] hawk-800 upgrade
2018-03-25 by Michael Hawkins
Hi Charles, You can t barge in here. So don t worry about that. I am the creator of the HAWK kits. If you need help. I am right here. Or you can email
hawk-800 upgrade
2018-03-25 by charleschop@...
sorry to just bardge in and focus to my own needs but im thinking of installing ..well buying first..lol a hawk 800 upgrade . technically able and physically
Join
2018-03-10 by Ray Crane
Hello, I would like to join this group. Although I ve owned a Poly 800 since 84, I feel that I could learn so much more. Ray
Re: [korgpolyex] Join
2018-03-10 by charles chop
poly 800 files or hawk files new voices I like to write algo programs to mix voice data and form new sysex files from existing ,,, some nice weird effects
Re: [korgpolyex] Join
2018-03-10 by bperkins211@...
What kink of sysex files? HAWK 800 files? Poly 800 Mk II files?
Re: [korgpolyex] Distorted Output
2018-03-10 by bperkins211@...
I could have sworn I swapped out the 1k for the 4K7. I remember that you mentioned it was needed before I put the atomahawk in. I noticed the VR2 I turned all
Re: [korgpolyex] Join
2018-03-09 by charles chop
I want to see more sys ex files surface ,,,,am I the only true sysex geek? ... On Fri, 3/9/18, Michael Hawkins korgpolyex800@yahoo.com [korgpolyex]
Re: [korgpolyex] Join
2018-03-09 by Michael Hawkins
If we can see your post here than you have indeed joined. It s been reasonably quiet around here for some time now. But there are still hundreds of members and