Join
2018-03-09 by Adam Douglas
Hi, I’d like to join the group. I think this is what I’m supposed to do. Thank you. Sent from my iPad
Messages
Browse messages
Page 6 of 141 · 7050 messages matched
Re: [korgpolyex] Distorted Output
2018-03-09 by Michael Hawkins
On the AtomaHawk board, check to see if the resistor R2 is a 4K7 ohm and NOT a 1K ohm. I sent out instructions to everybody explaining that the resistor needed
Re: [korgpolyex] Distorted Output
2018-03-03 by bperkins211@...
Hi Mike, I think I got the one out of the first batch of SMT Atomahawk boards you made. Odd you mentioned it.. I sometimes wondered if there were settings for
Re: [korgpolyex] Re: Hawk 800 GUI- Latest version
2018-03-01 by Michael Hawkins
I haven t looked at the MIDI performance for some time and MIDI response times depend on some factors but you should expect no more than approx. 10mS delay
Re: [korgpolyex] Distorted Output
2018-03-01 by Michael Hawkins
Which hardware version of AtomaHawk do you have?Which version of software are you running? /mike From: bperkins211@gmail.com [korgpolyex]
Re: Hawk 800 GUI- Latest version
2018-02-24 by bperkins211@...
If you want the .bpanelz file you can either- Open the Standalone and click: File Export Export Compressed Binary + Resources Then save it to whatever name
Re: Hawk 800 GUI- Latest version
2018-02-24 by domgoold@...
...brilliant...now virus software wants to check it over before it can load... i have had issues, btw, with ctrlr standalones that don t run properly the 1st
Re: Hawk 800 GUI- Latest version
2018-02-24 by domgoold@...
me too, correction 8-) did see the link, and had downloaded it. i ll try to load it up now. confession too: i have STILL not fitted the Hawkmod kit i ve had
Re: Hawk 800 GUI- Latest version
2018-02-23 by bperkins211@...
Correction... Download arrow is at top RIGHT of the download page.
Hawk 800 GUI- Latest version
2018-02-23 by bperkins211@...
Last Weekend I tried to post this and another post, but they never posted at all. I will try again today.... Here s another shot at a GUI for the HAWK 800. You
Re: New Hawk800 GUI Preview
2018-02-22 by bperkins211@...
Hi Dom, I tried posting a somewhat finished version with download link last weekend but it never posted. Then I tried a test post and it too wouldn t post.
Re: New Hawk800 GUI Preview
2018-02-22 by domgoold@...
Hi Blaine, i m an avid Ctrlr user at the moment. mainly making silly UI things, trying to learn Lua, sort of getting the hang of it. - don t know if you want
Re: Distorted Output
2018-02-05 by bperkins211@...
well I managed to poke around inside and turned the VR2 (next to the VCF chip) completely CCW. Or most might say.. I turned it all the way down. Seems to have
Distorted Output
2018-02-04 by bperkins211@...
I have noticed lately that my HAWK800 has massive distortion. I ve isolated it down to the HAWK itself.. not something external like my FX unit, USP audio
Re: New Hawk800 GUI Preview
2018-02-04 by bperkins211@...
I just posted a reply to your post on YouTube.. Actually I have been looking this over again recently while I had a little time to do so. Unfortunately there
Re: New Hawk800 GUI Preview
2018-02-04 by 4nm6kadee7zdzsxm65oyvgpeyokmlg7czf2bnuoi@...
Hey! Just wanted to say Hi and ask if you re still working on this? Would be amazing D
Re: [korgpolyex] Re: Batteries?
2018-01-08 by Steve Daniels
I’ve been able to get it to work using my iPhone headphone output. Remember that the Poly has a switch on the back for low or high volume input to the data
Re: Batteries?
2018-01-08 by vignesro@...
Thanks Guys. I ll try again once more to use my laptop. I ll try Jan s method of starting with no volume and slowly raising it until the Poly800 starts
Re: [korgpolyex] Re: Batteries?
2018-01-06 by Jan Palmér
Hi! The poly800 is vett sensitive to the volumelevel of the backup signal. -Try lowering the volume and start load on poly800. -Then start wav on computer.
Re: [korgpolyex] Re: Batteries?
2018-01-06 by igotbatwings@...
I struggled a bit with loading the presets from my laptop, playing the tones out of itunes. Was able to do it finally via trial/error with adjusting the
Re: Batteries?
2018-01-05 by vignesro@...
Hi Greg. Wow. Thanks for such a quick response. Your answers match up with what I was thinking/hoping for. I m going to pull the C batteries out completely
Re: Batteries?
2018-01-05 by GregCoben@...
Bob, the original Poly-800 uses six C batteries primarily as backup to preserve the internal memory, although the batteries can be used for general operation
Batteries?
2018-01-05 by vignesro@...
Hi Guys, I m new. I picked up a Korg Poly 800 a couple of weeks ago for $100. It s a little beat up and had no sounds in it. I opened it up and saw some one
Re: [korgpolyex] Re: Introducing Myself - and a question
2017-10-13 by Eanna Butler
This may help: https://www.youtube.com/watch?v=uxFYOz0DE-0 Good luck! On Fri, Oct 13, 2017 at 11:05 PM, charles chop charleschop@yahoo.ca ... -- ( ͡° ͜ʖ
Re: [korgpolyex] Re: Introducing Myself - and a question
2017-10-13 by charles chop
do you have an electronics part supply store in the town that u live? try there first . prob cheapier and quicker than ebay most tact switches should work or
Re: [korgpolyex] Re: Introducing Myself - and a question
2017-10-13 by tonsil@...
Probably. I was looking here: https://groups.yahoo.com/neo/groups/korgpolyex/files/2%29%20EX-800/Servicing/ In there it says the switches are no longer
Re: [korgpolyex] Re: Introducing Myself - and a question
2017-10-13 by Gordonjcp
... Could just be that the tact switch has worn out. You can buy replacements, and it s worth getting all of them out if you do one because the rest won t be
Re: Introducing Myself - and a question
2017-10-13 by tonsil@...
So, just to follow up, I think I figured out the problem. There must have been some gunk in the pots that was causing a problem. I bought some DeoxIT that
Re: [korgpolyex] Introducing Myself - and a question
2017-10-10 by Gordonjcp
... There s not a lot to them. There are some extremely crappy circuit diagrams out there (I ve been telling myself I ll redraw them in Kicad some wet weekend
Re: [korgpolyex] Introducing Myself - and a question
2017-10-10 by tonsil@...
I don t think there s any problem with the patch memory. Once the EX-800 started producing sound (and I m still not sure why it wasn t initially) I was able to
Re: [korgpolyex] Introducing Myself - and a question
2017-10-10 by tonsil@...
I have a Eurorack system, and I ve done DIY modules for that (through hole, not surface mount). I also built an MDRONE from Evaton Technologies, a 3 square
Re: [korgpolyex] Introducing Myself - and a question
2017-10-10 by charles chop
do u have much electronic background? ... On Mon, 10/9/17, tonsil@comcast.net [korgpolyex] wrote: Subject: Re: [korgpolyex]
Re: [korgpolyex] Introducing Myself - and a question
2017-10-10 by tonsil@...
yes.
Re: [korgpolyex] Introducing Myself - and a question
2017-10-09 by Michael Hawkins
Hi Mike, If your EX800 had lost its patch memory then there s a good chance it won t make much sound. So load up the default patch set and see how things go
Re: [korgpolyex] Introducing Myself - and a question
2017-10-09 by charles chop
do u know what a variable resistor is? ... On Mon, 10/9/17, tonsil@comcast.net [korgpolyex] wrote: Subject: [korgpolyex]
Introducing Myself - and a question
2017-10-09 by tonsil@...
Hey all, My actual name s Mike Marcus, I joined the group because I just bought an EX-800 (via Reverb.com). I only started using it yesterday, so all I ve been
Re: [korgpolyex] Re: Random Pitchbend Sound & Midi Events from EX800 (with Hawk & MoogSlayer Mods)
2017-09-07 by Michael Hawkins
If you don t have the AtomaHawk then 58 does not matter. Correct. /Mike From: 4nm6kadee7zdzsxm65oyvgpeyokmlg7czf2bnuoi@yahoo.com [korgpolyex]
Re: [korgpolyex] Re: Random Pitchbend Sound & Midi Events from EX800 (with Hawk & MoogSlayer Mods)
2017-09-06 by 4nm6kadee7zdzsxm65oyvgpeyokmlg7czf2bnuoi@...
hahaha... same here. i have also finally stopped the Max4Live device bricking my EX. Fault seem to have been some corrupt patches in Bank 2 and 3. I have
Re: [korgpolyex] Re: Random Pitchbend Sound & Midi Events from EX800 (with Hawk & MoogSlayer Mods)
2017-09-06 by charles chop
good , because my next guess would have been that you have some sort of auto bend feature... I can rest without concern now..... don t panic !!!!! lol charles
Re: [korgpolyex] Re: Random Pitchbend Sound & Midi Events from EX800 (with Hawk & MoogSlayer Mods)
2017-09-06 by 4nm6kadee7zdzsxm65oyvgpeyokmlg7czf2bnuoi@...
Hi Mike thanks for your reply! If i don t have a atomahawk i can ignore that second setting, right? Other than that I will do that settings in my sleep soon,
Re: [korgpolyex] Re: Random Pitchbend Sound & Midi Events from EX800 (with Hawk & MoogSlayer Mods)
2017-09-06 by Michael Hawkins
Just saw this email. Glad you found the answer. Whenever you upload firmware, the global settings are reset back to default values. So you always have to set
Re: Random Pitchbend Sound & Midi Events from EX800 (with Hawk & MoogSlayer Mods)
2017-09-06 by 4nm6kadee7zdzsxm65oyvgpeyokmlg7czf2bnuoi@...
Ha, found & fixed the problem! The global parameter 34 was set to Poly800, not EX800. 34 GL xx - Device type xx - 0=Poly-800 MK1, 1=EX800, 2=Poly-800 MK2 This
Re: [korgpolyex] Re: Random Pitchbend Sound & Midi Events from EX800 (with Hawk & MoogSlayer Mods)
2017-09-06 by 4nm6kadee7zdzsxm65oyvgpeyokmlg7czf2bnuoi@...
Hi. i get the same if i only connect a midi keyboard to the midi-in of the HawkEX800. ...even when the midi in is disconnected it still sends those events:
Re: [korgpolyex] Re: Random Pitchbend Sound & Midi Events from EX800 (with Hawk & MoogSlayer Mods)
2017-09-05 by charles chop
https://www.sweetwater.com/insync/active-sensing/ Charles ... On Tue, 9/5/17, charles chop charleschop@yahoo.ca [korgpolyex]
Re: [korgpolyex] Re: Random Pitchbend Sound & Midi Events from EX800 (with Hawk & MoogSlayer Mods)
2017-09-05 by charles chop
https://www.sweetwater.com/insync/active-sensing/ Charles ... On Tue, 9/5/17, charles chop charleschop@yahoo.ca [korgpolyex]
Re: [korgpolyex] Re: Random Pitchbend Sound & Midi Events from EX800 (with Hawk & MoogSlayer Mods)
2017-09-05 by charles chop
active sencing ..google it ,,, but to my understanding is a pulse...sent every 20ms or so sent from some decives... its a means of preparation for
Re: [korgpolyex] Re: Random Pitchbend Sound & Midi Events from EX800 (with Hawk & MoogSlayer Mods)
2017-09-05 by 4nm6kadee7zdzsxm65oyvgpeyokmlg7czf2bnuoi@...
Hi Charles, thanks for your reply! The bend-timing seems rather random to me. Other than that i m not sure what you mean with active sensing . But i had to
Re: [korgpolyex] Re: Random Pitchbend Sound & Midi Events from EX800 (with Hawk & MoogSlayer Mods)
2017-09-05 by charles chop
did active sensing knock out the running status byte of pitch bend? in the firm wear? appears to be a consistant time elapse from when pitch bend envoked to
Re: Random Pitchbend Sound & Midi Events from EX800 (with Hawk & MoogSlayer Mods)
2017-09-04 by 4nm6kadee7zdzsxm65oyvgpeyokmlg7czf2bnuoi@...
Here s a video that shows that something inside the EX800 seems to generate random Pitch Wheel Events. https://www.youtube.com/watch?v=QjUAeDzJ2_M
Random Pitchbend Sound & Midi Events from EX800 (with Hawk & MoogSlayer Mods)
2017-09-03 by 4nm6kadee7zdzsxm65oyvgpeyokmlg7czf2bnuoi@...
Hello I bought a EX800 with Hawk & MoogSlayer -Mods a while ago. It works ok, but it detunes randomly - and sends those detunes also via pitchbend midi events.