Re: SDSV knob caps
2008-11-24 by monzarottie
Hey Matt, Give this site a look see. http://www.ehcknobs.com/audio.html
Messages
Browse messages
Page 89 of 172 · 8595 messages matched
SDSV knob caps
2008-11-24 by Matt
I think my OCD is worsening...does anyone know a source for the little caps that cover the end of the knobs on the SDSV as I m missing 8 of them? Matt PS this
Re: [Simmons Drums] SDX Pad Retrofit
2008-11-21 by rolandbrenner@netzero.net
As they say in your country: No deeeffferance Trying to keep it real, I went with a floating type setup. Being a hard-hitter, I wanted to have some give,
Re: [Simmons Drums] Re: MTM - tips & tricks?
2008-11-21 by jesper
... On the other hand, over midi you can just move the entire part a little and there is no harm done... or even cut in the finished recording if it s not to
Re: [Simmons Drums] Re: MTM - tips & tricks?
2008-11-21 by jesper
... I ve used the kadi outs of my Kenton Pro-4 s this far but would love the dynamics and full force of the MTM. I ll probably return with a review later...
Re: [Simmons Drums] Re: MTM - tips & tricks?
2008-11-21 by Patrice Jacquot
yes, the MTM has a slice delay when Midi used... it was its reputation when it came out. I use them anyway to trigg all our deary non midi modules from a
Re: [Simmons Drums] SDX Pad Retrofit
2008-11-21 by Patrice Jacquot
How does the FSR respond after all that ? I would nearly prefer to put some ZI pads surfaces on my other Simmons pads... I personnaly prefer the design... but
Re: [Simmons Drums] SDX Pad Retrofit
2008-11-21 by Patrice Jacquot
Hi Roland, by the way, I have a few new SDX symbal pad surfaces...somewhere ... but where... but that s not exactly helping in your case ... ;- ) Patrice. ...
Re: SDX Pad Retrofit
2008-11-21 by superwolle70
The attachement seems to be ripped of your posting ... first retrofit in replacing the snare head ( see attach ). It s a perfect solution if your pads happen
SDX Pad Retrofit
2008-11-21 by rolandbrenner@netzero.net
Hola ! For those lucky few who happen to own one, I just completed the first retrofit in replacing the snare head ( see attach ). It s a perfect solution if
Re: [Simmons Drums] Re: MTM - tips & tricks?
2008-11-21 by Zahir Manek
i have an mtm but find i get better midi to triggering of my sdsV and sds7 from my analogue solutions mt16. which is weird because its the greatest midi to
Re: [Simmons Drums] Re: MTM - tips & tricks?
2008-11-21 by rolandbrenner@netzero.net
DANGER WILL ROBINSON !!!! http://en.wikipedia.org/wiki/Danger,_Will_Robinson - Roland http://www.myspace.com/roland_brenner http://home.rr.com/zengine Warning
Re: [Simmons Drums] Re: MTM - tips & tricks?
2008-11-21 by sander villers
Warning ! ... From: jesper Subject: Re: [Simmons Drums] Re: MTM - tips & tricks? To: Simmons_Drums@yahoogroups.com Date:
Re: [Simmons Drums] Re: MTM - tips & tricks?
2008-11-21 by jesper
... And before anyone sends warnings - I will be careful and read carefully and or check voltages etc. -- electronically yours, jesper - -- --- ---- ----- ----
[Simmons Drums] Re: MTM - tips & tricks?
2008-11-21 by superwolle70
Yes, sorry, you are right. Channel 8 can be run in HiHat mode . As SDS7 and V HiHat is technically the same, this should work with the SDSV HiHat also ... the
Re: [Simmons Drums] Re: MTM - tips & tricks?
2008-11-21 by jesper
... But that said the pedal should be controllable, with the right connections/voltages. :) Thanks for the info, I ll read through the manual and dig into the
Re: MTM - tips & tricks?
2008-11-21 by superwolle70
The HiHat pedal cannot be controlled by the MTM and it cannot record controller events. It can only record program change events of the selector pad (this
MTM - tips & tricks?
2008-11-21 by jesper
Hi list, finally I m starting to get time to find out what this baby can do. From what I ve guessed it was meant to control the SDS-7 - right? But it works as
Re: [Simmons Drums] WTB SDSV Hi-Hat module
2008-11-21 by jesper
... Hi Matt, you wouldn t be the first on that waiting list. ;) Most of us who do own a complete SDS-V have accuired it in parts. I bought one (like you) which
WTB SDSV Hi-Hat module
2008-11-20 by Matt
...does anyone have one that they d like to sell? Thanks, Matt
Re: [Simmons Drums] SDS9 in Use
2008-11-20 by jesper
... You should lend Eskil and Joakim the drums. They could use more 80 s percussion sounds. :D -- electronically yours, jesper - -- --- ---- ----- ---- --- --
Re: SDS9 in Use
2008-11-20 by Matt
Hey there Ken, Mate, I just gotta check you guys out! I ve heard your stuff on Myspace and it s fuckin awesome! Nice job getting the SDS9 pads looking good
SDS9 in Use
2008-11-20 by ken_evans_99
Hi All, A mate has put some photos up from a show we did in Sydney recently...I m the guy with the Roland bass guitar, but it s my red SDS9 kit being used by
Re: [Simmons Drums] FS SDSV Suitcase Pads
2008-11-18 by Zahir Manek
how much were you thinking for them? i have pads but they re so big i ve put them in storage. ... From: Matt Subject: [Simmons Drums]
Re: FS SDSV Suitcase Pads
2008-11-18 by superwolle70
Beautiful condition! By the way: The plastic suitcase is originally supposed to come from a store for angler requirements (not proved but plausible) and there
FS SDSV Suitcase Pads
2008-11-18 by Matt
I ve just collected the Simmons SDSV that I won via VEMIA & am so happy to have one to use again after a break of 26 years! The brain came with the pretty rare
Re: Selling an SDX...probably...
2008-11-16 by Phil Murray
Hello all, Sorry for the delay, photos can be found at http://www.philmurray.net/SDX/ HDD is in there but not connected, done a quick run up and all seems ok
Re: [Simmons Drums] 3x simmons hex pads and kick drum from sdsv kit for sale
2008-11-09 by jesper
... I already had it on my memory list, but I bet shipping outside the UK is no fun, as usual. -- electronically yours, jesper - -- --- ---- ----- ---- --- --
3x simmons hex pads and kick drum from sdsv kit for sale
2008-11-08 by acslade
hi just drumming up some interest :) for my sdsv kit. i have sold the brain but have the kit left - 3 x hex pads and kick drum all stands and rare as simmons
[Simmons Drums] simmons sdx
2008-11-05 by flowline
Hi, There is a Simmons SDX for sale on www.spheremusic.com with all the uber rare software, says needs attention but is working. and says best sounding sampler
FW: [sdiy] Simmons SDC 200 Electronic Drum Amp up for grabs
2008-11-05 by Steve Ridley
Anyone interrested please contact Seb, not me...
Re: [Simmons Drums] Selling an SDX...probably...
2008-11-05 by Patrice Jacquot
Not really exact ... ;- ) ... [Non-text portions of this message have been removed]
Re: [Simmons Drums] Selling an SDX...probably...
2008-11-05 by Patrice Jacquot
Yes you do ;- ) the XRack ... about only 5 built ... You can see one on the Simmons synth site (it s mine took in pics before I bought it ...) The prototype
Re: [Simmons Drums] SDS7 help
2008-11-03 by rolandbrenner@netzero.net
Wait until an SDSV goes up for sale. Built like a tank, much better sounds ( chips ), modular, no memory/battery issues. Out of the Simmons stuff, the most
Can i interest anyone with a SDS7 Kitselector ?
2008-11-02 by pagan_prosperity
Never used Kitselector for sale feel free to ask for more details ! Its located in Belgium All the best Sander
Re: SDS7 pads
2008-11-02 by monzarottie
Thanks for connecting the dots [:)] Roger ... the ... of ... (slightly ... the ... [Non-text portions of this message have been removed]
Re: SDS7 pads
2008-11-02 by superwolle70
You are right. The SDS7 lived to see two generations of pads. The first (Mark III) came when the SDS7 was introduced in 1984.
SDS7 pads
2008-11-02 by monzarottie
Hi all. Can someone tell me if there were two or possibly more versions of the SDS7 pad? The reason I ask is because I have two very different sets of pads
Re: [Simmons Drums] Digest Number 1236
2008-11-01 by Gordon JC Pearce MM3YEQ
... In mine it was a lithium pack, and it was well flat! Now replaced with a pair of easily-replaceable AA batteries. Nearly any cool old 80s synth with
Betr: [Simmons Drums] Re: Selling an SDX...probably...
2008-10-29 by Berk Aarts
I remember one in holland, serialnumber 000005 !!!! I believe Patrice has one?? greets berk
Re: Selling an SDX...probably...
2008-10-29 by superwolle70
At least 2 ... wonder how many out of the 3 have survived?
Re: [Simmons Drums] Re: Selling an SDX...probably...
2008-10-29 by flowline
... one was just up on ebay a couple weeks ago
Re: [Simmons Drums] Re: Selling an SDX...probably...
2008-10-29 by sm papke
Wow! I missed those along the way?? those machines look superb! I wonder how many out of the 3 have survived? Thanks
Re: [Simmons Drums] Re: Selling an SDX...probably...
2008-10-29 by jesper
... damn - should ve remembered those. But asking for one out of three is like my tireless hunt for one of (one? two? three?) EDP Gnat Deluxe s out there... --
Re: [Simmons Drums] Re: Selling an SDX...probably...
2008-10-29 by rolandbrenner@netzero.net
He s probably wondering if it has the rack stand that the computer console mounts to. - Roland http://www.myspace.com/roland_brenner
Re: Selling an SDX...probably...
2008-10-29 by superwolle70
A handful of rack versions of the SDX had indeed been built (maybe around 3 units I guess) and were called X-Rack http://www.simmons.synth.net/xrack/ ...
Re: [Simmons Drums] Selling an SDX...probably...
2008-10-29 by jesper
... SDX - rack version?! Am I missing something essential here? -- electronically yours, jesper - -- --- ---- ----- ---- --- -- - www.electronic-obsession.se
Re: [Simmons Drums] Selling an SDX...probably...
2008-10-29 by flowline
hi, im interested, have you any pics? so is it the rack version? thank you, robert.
Re: [Simmons Drums] Selling an SDX...probably...
2008-10-29 by rolandbrenner@netzero.net
Hey Phil ! Good luck on the sale. It costs a fortune to ship those tanks, so hopefully you will find someone locally to buy it at a fair price. Not sure if
Selling an SDX...probably...
2008-10-29 by Phil Murray
Hello all, I m going to be selling one of my SDX s soon, (no history, not owned by anyone famous that I know of). Before it appears on ebay, I wondered if