Re: [Simmons Drums] Remake of famus simmons!
2005-08-19 by dalenkarl
... others, and sounds it too. I still have doubths Paul, to sound! ;-) But, i mixed it up a bit, the 3394 based units mixes noise and VCO into filter, SDSV
Messages
Browse messages
Page 143 of 172 · 8595 messages matched
Re: [Simmons Drums] Remake of famus simmons!
2005-08-19 by Paul.Maddox.Mail-list@Synth.net
K, ... The filter is needed because of the noise. the SDS-V uses a CEM3340 and SSM2044, its quite different to the others, and sounds it too. ... hehe, so
Re: [Simmons Drums] Remake of famus simmons!
2005-08-19 by gordon@gjcp.net
... I ve written up a quick functional description of the SDS3/4 channels, based on the PDF there. You can read it at
Re: [Simmons Drums] Remake of famus simmons!
2005-08-19 by Thomas Williamson
Hi Gordon, I ll check the circuit board on my SDS-III tonight. I supplied the SDS-III info for simmons.synth.net, this is all hand drawn stuff which was given
simmons-collectors?!
2005-08-19 by jesper@electronic-obsession.se
Superwolle or someone else neeeeeeeds this single;
Re: [Simmons Drums] Remake of famus simmons!
2005-08-19 by jesper@electronic-obsession.se
... I have no myself, I have a SDS-IV and AFAI remember it s very basic but might be double, cannot remember. Cannot get to my digital photos right now
Re: [Simmons Drums] Remake of famus simmons!
2005-08-19 by gordon@gjcp.net
... Wow. That s an incredibly simple circuit. Do you know if the board is single - or double-layer? If it s single layer, a simple scan of the track side
Re: [Simmons Drums] Remake of famus simmons!
2005-08-19 by jesper@electronic-obsession.se
simmons.synth.net is your friend... electronically yours, jesper - -- --- ---- ----- ---- --- -- - www.electronic-obsession.se ... From: Gordon JC Pearce
Re: [Simmons Drums] Remake of famus simmons!
2005-08-19 by jesper@electronic-obsession.se
Sim-On s, as in simulation on ;) electronically yours, jesper - -- --- ---- ----- ---- --- -- - www.electronic-obsession.se ... From: dalenkarl
Re: [Simmons Drums] Sincerily yours!
2005-08-19 by jesper@electronic-obsession.se
I prefer the bf and the psch from piiiiiooooouuuuuuwwww , czzzzzziiiiiiiscccchhh and ooooouuuummmmppph electronically yours, jesper - -- --- ---- -----
Re: [Simmons Drums] Remake of famus simmons!
2005-08-19 by jesper@electronic-obsession.se
... drum diy synt more into the voice architecture of the Pearl syncussion SY1 but with the capability of making the typical simmons sounds. Well, SY-1 isn t
Re: [Simmons Drums] Remake of famus simmons!
2005-08-19 by jesper@electronic-obsession.se
... ...and it sounds like the real deal?! *sceptic* electronically yours, jesper - -- --- ---- ----- ---- --- -- - www.electronic-obsession.se
Re: [Simmons Drums] Remake of famus simmons!
2005-08-19 by Gordon JC Pearce
... There s no good reason why you can t get close to the sound of the original Curtis chips using discrete components (OK, I m going to lump op-amps in there,
Re: [Simmons Drums] Remake of famus simmons!
2005-08-19 by jesper@electronic-obsession.se
I doubt it - those with cool filters have rare IC:s in them and those without sounds crappy etc. I think there is enough new and alternative drummers out there
Good Trader : Senso
2005-08-18 by Lars Johansson
To cut a short story long, I sold a bunch of Simmons SDS-7 parts on and off Ebay. Senso bought IIRC seven soundcards. Instead of packaging each card
Re: [Simmons Drums] Remake of famus simmons!
2005-08-18 by dalenkarl
... Limmons and Dimmons! :-) ... preferably a ... I dont know the internals of the V, but if VCO produces triangle as in those Simmons units based on CEM3394,
Re: [Simmons Drums] Remake of famus simmons!
2005-08-18 by Paul Maddox (Mail LIsts)
K, ... Hehe. ... To get that simmons SDS-V sound, you need a 4 pole filter, preferably a moog ladder (SSM2044) ... Pretty cheap, yes.. Then theres the PCB,
Sincerily yours!
2005-08-18 by dalenkarl
Wich analog disco sound do you prefear? The beeyoo,beeyoo sound, or the booyee,booyee sound! :-) Reg KD
Re: [Simmons Drums] Remake of famus simmons!
2005-08-18 by dalenkarl
Actually it could do a lot more sounds then the SY1 or a typical simmons! For example,a drum voice could consist of two Sine/triangle VCO, one can do FM , lin
Re: [Simmons Drums] Remake of famus simmons!
2005-08-18 by dalenkarl
... if it sounded good. Well, there is no copyright issue exept perhaps for the name simmons, we could name it Limmons for instance! :-) ... Well, i just
Re: [Simmons Drums] Remake of famus simmons!
2005-08-18 by Nate Stewart
... Speaking of remakes, anyone on here know what Danny Carey is planning? His site said something was in the works to replace his SDX, with a picture of what
Re: [Simmons Drums] Remake of famus simmons!
2005-08-18 by superwolle70
Huuuuhhhh, blasphemy ;-) ... is one ... if it ... than £250
Re: [Simmons Drums] Remake of famus simmons!
2005-08-18 by Nate Stewart
Just track down the VST version of Waldorf Attack. A modeled SDS-V is one of the presets, and you can alter the sounds to your heart s content. Nate
Re: [Simmons Drums] Remake of famus simmons!
2005-08-18 by superwolle70
I would really appreciate a remake of the pad s backside shells ... it sounded ... than £250 to ... the hardest
Re: [Simmons Drums] Remake of famus simmons!
2005-08-18 by Paul.Maddox.Mail-list@Synth.net
KD, ... Aside from the copyright issues, I m sure people would go for it, if it sounded good. The biggest problem is going to be cost. If you re talking just
Re: SV: [Simmons Drums] Remake of famus simmons!
2005-08-18 by Gordon JC Pearce
... It wouldn t be difficult. The SDS-7 uses a couple of unusual chips, and of course the hybrid modules on each board. I tried reading the service manual on
SV: [Simmons Drums] Remake of famus simmons!
2005-08-18 by KW
i would go for SDS-5 or SDS-7 as a sound engine, and the sequencer SDS-6, if any other sequencer i don t know what else choose, maybe to throw in a CRT or TFT
Re: [Simmons Drums] Remake of famus simmons!
2005-08-18 by david pinnington
possibly except that most people who want simmons either have the gear they need via ebay or back in the day or if it s the sounds then then they are
Remake of famus simmons!
2005-08-18 by dalenkarl
I wonder, would there be any interest/market for a remake of a set of simmons drums, either as a DIY kit or as ready made? Im talking of the sound module +
[Simmons Drums] Re: It's my lucky day...
2005-08-12 by superwolle70
Honestly: The seller of the SDS3 just told me he wanted to give it to the bulk garbage. So this was in fact a last-minute deal ... Simmons in the ... recall
Re: [Simmons Drums] anyone in the UK who wants this?
2005-08-11 by Gordon JC Pearce
... I d love it, but I ve spent my toy budget. It s only a couple of hour s drive, too. Gordon.
SDS 9 manual for download
2005-08-11 by superwolle70
(un-)fortunately in german :-| http://www.simmonsmuseum.com Search for sds 9
anyone in the UK who wants this?
2005-08-11 by jesper@electronic-obsession.se
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=7340680260&ssPageName=STRK:MEWA:IT I d buy it if I were near Aberdeen or just simply in the UK...
Re: [Simmons Drums] Re: It's my lucky day...
2005-08-11 by jesper@electronic-obsession.se
... They still do I guess! ;) electronically yours, jesper - -- --- ---- ----- ---- --- -- - www.electronic-obsession.se
Re: [Simmons Drums] Re: It's my lucky day...
2005-08-11 by jesper@electronic-obsession.se
... Like me of your SDS-3 then. ;) ... Very much so... NOT! Don t remember, but I think he called it Simmons in the description since it says Simmons on the
Re: [Simmons Drums] Re: It's my lucky day...
2005-08-11 by jesper@electronic-obsession.se
Hi Hauke! Ebay.de is my second home. ;) I bought the SDS-2 circa two years ago and it was a really crappy photo and not much info. Not even a word about if it
SDS7 samples and manual
2005-08-10 by Gordon JC Pearce
Hi there, Does anyone know how what the Prog Jigsaw and Prog Selector LEDs do on the SDS7? I notice that the buttons are numbered from 1 to 16, and 1 and
[Simmons Drums] Re: It's my lucky day...
2005-08-10 by monodist
Aargh. Congratulations. I had been searching for months here in the Netherlands until I finally found an SDS8 which just happened to have been sold a day
[Simmons Drums] Re: It's my lucky day...
2005-08-10 by superwolle70
Hm (... enviously crying rivers ...), was it a lucky punch or was it declared as a Simmons SDS2 ? Was it before Ebay broke through the magic barrier of 1000
Re: [Simmons Drums] Re: It's my lucky day...
2005-08-10 by Hauke Harm
@jesper: Hi! You must be kidding :-) I live in Germany and have a close look for equipment a couple of times every day on ebay but I haven t seen an SDS2 there
Re: [Simmons Drums] Re: It's my lucky day...
2005-08-10 by jesper@electronic-obsession.se
... Seriously speaking, there might be a market! ... You ll cry blood if I tell you where I found it and how much I payed... OK, ready? Ebay.de and 76 euro -
[Simmons Drums] Re: It's my lucky day...
2005-08-10 by superwolle70
Maybe I should found a Simmons rental service as an additional business? The SDS2, well, did you sell your body to get it? ... that is!
Re: [Simmons Drums] Re: It's my lucky day...
2005-08-10 by jesper@electronic-obsession.se
Take a lot of pictures and then sell the SDS-3 with profit! To me that is! ;) electronically yours, jesper - -- --- ---- ----- ---- --- -- -
[Simmons Drums] Re: It's my lucky day...
2005-08-10 by superwolle70
Beside programming, bidding, scanning and polishing I must admit that there s hardly any time left ... show.
Re: [Simmons Drums] Re: It's my lucky day...
2005-08-10 by jesper@electronic-obsession.se
... Yeah! That s the way (aha, aha) I like it! ... Great - time to go play with the SDS-2 then. ;) I must say I m impressed - do you play them too or are they
Re: It's my lucky day...
2005-08-10 by superwolle70
Click the gallery link next to the pad intro picture, there you ll find the whole beauty ... SDS-V. ;) I am patient... In the meantime I will slightly
Re: [Simmons Drums] It's my lucky day...
2005-08-10 by jesper@electronic-obsession.se
Found the picture of the pads later - just two or all four? Anyway, a neat bargain. I m still on the lookout for one to complete my 1-5 series. ;) Had to
Re: [Simmons Drums] It's my lucky day...
2005-08-10 by superwolle70
Short story: I had lost an SDS9 brain auction. The seller found out that the unit was broken so the buyer did not want it anymore. Therefor the seller
Re: [Simmons Drums] It's my lucky day...
2005-08-10 by jesper@electronic-obsession.se
Monty Pyton mode on: You lucky, lucky, lucky bastard... Monty Pyton mode off. Congrat s! How much? With pads? Etc - fill us in! Seems to be in an awesome
It's my lucky day...
2005-08-09 by superwolle70
http://www.simmonsmuseum.com/?area=devices&view=details&id=10 ;-)))))))))))))))))))