Yahoo Groups archive
Messages
Page 4 of 144 · 7194 messages matched
2013-10-22 by Matthew Carpenter
All panels are performing perfectly and are in nice cosmetic condition except where noted. They were used gently and kept under dust covers in a non-smoking home. Prices are negotiable. #1 Custom (pre-STS) New Timbral Oscillator, Wave Multipliers, Variable Q VCF, Dual Universal S
2013-10-16 by g_vanhuizen
I have the following for sale: Animoo 2.5" Boat Ex Condition $4300 Custom Panel Scaling Buffers, Active Processor, Precision VCO x2, Ring, N Comp, Variable Slope VCF, Variable Bandwidth VCF, Dual Phaser, Smooth/Step Generator 4.5" Boat VG+/EG- Condition $3500 PS-6 Power Supply $5
2013-10-09 by Fernando Zarone
Thanks, but… if only I had their emails… :-)) Thank you for the support, Nick! Il giorno 09/ott/2013, alle ore 17:52, nick.liebrecht@... ha scritto: Hi Fernando, I'm not really familiar with the DUSG, since I mainly build TKBs. I know that the DSG uses a lot of selected and match
2013-10-09 by keeperofthewogglebug
Hi Fernando, I'm not really familiar with the DUSG, since I mainly build TKBs. I know that the DSG uses a lot of selected and matched parts, so maybe the best bet would be to contact Rex or Kevin Fortune. Nick ---In sergemodular@yahoogroups.com, wrote: I have solved the TKB probl
2013-10-09 by keeperofthewogglebug
Hi, That is normal behavior. The TKB clock input needs a nice fast transition to work as expected. When you use the CV output from a DSG or DTG, the transition is usually too slow. Nick ---In SergeModular@yahoogroups.com, wrote: But with that blue jack it does not work… could it
2013-10-08 by Fernando Zarone
I have solved the TKB problem replacing the FWD/REW switch. The problem now is: When doing the replacement, the brown wire on one side of the 3 poles of the switch went into contact with the RED wire (on the opposite side of the switch). The Clock was fed by the DUSG; after this,
2013-10-08 by Fernando Zarone
But with that blue jack it does not work… could it be a problem of TKB calibration or is it normal behavior? Il giorno 08/ott/2013, alle ore 15:30, John P johnp299792@... > ha scritto: Using the DTG gate gives strong pulses with nice square edges, more reliable to trigger on. Blu
2013-10-08 by John P
Using the DTG gate gives strong pulses with nice square edges, more reliable to trigger on. Blue jack gives soft-sided control voltage signal, although you can change that by adjusting rise & fall times to a minimum. No reason for embarassment - It's just a different technique! O
2013-10-08 by freq63
It means I prefer to pay for an existing panel than to wait after I paid for it for months until, maybe, I get it. ---In SergeModular@yahoogroups.com, wrote: ??? Elaborate please? On Mon, Oct 7, 2013 at 9:58 PM, freq63@... > wrote: No thanks. I know what "might" means coming from
2013-10-08 by Fernando Zarone
I am blushing, Nick. Yes, after using red GATE OUT jack it works ok… IS that the proper connection? You are really the king of TKBs… :-) Last, can you suggest a good replacement of the silver switch for >> Grazie! Fernando Il giorno 07/ott/2013, alle ore 23:44, nick.liebrecht@...
2013-10-07 by keeperofthewogglebug
sorry, wrong thread! Nick ---In sergemodular@yahoogroups.com, wrote: Hi Fernando, That is bad news, but I think we can get it fixed. First, make sure the signal from the DTG is coming from a red Gate out jack instead of the blue CV out jack. Sometimes the CV signal gives random o
2013-10-07 by keeperofthewogglebug
Hi Fernando, That is bad news, but I think we can get it fixed. First, make sure the signal from the DTG is coming from a red Gate out jack instead of the blue CV out jack. Sometimes the CV signal gives random operation but the gate always give a clean transition. The next thing
2013-10-07 by achtung_999
??? Elaborate please? On Mon, Oct 7, 2013 at 9:58 PM, freq63@... > wrote: No thanks. I know what "might" means coming from you! ---In SergeModular@yahoogroups.com , sergemodular@yahoogroups.com > wrote: I might got one. On Wednesday, October 2, 2013, wrote: I mean I want to buy t
2013-10-07 by Fernando Zarone
BTW now I see that the TKB works ok when I feed into the clock input the gate out from a 5-stage sequencer, also manually pushing the green buttons, but does not work "on line" , only random, when I feed a clock from the DTG! Il giorno 07/ott/2013, alle ore 22:23, Fernando Zarone
2013-10-07 by Fernando Zarone
Hi all, My TKB fell down to the ground. AAARGH. The rew/forward switch rod is broken, not a big problem, I detached the two yellow/red wires but now I can get only RANDOM sequences. I mean, no forward or reverse sequence, also when I connect or disconnect the two wires. All of th
2013-10-07 by freq63
No thanks. I know what "might" means coming from you! ---In SergeModular@yahoogroups.com, wrote: I might got one. On Wednesday, October 2, 2013, wrote: I mean I want to buy the panel, not the module. It is to build my own SWAMP module with the CGS boards that I bought from Ken. -
2013-10-02 by Dennis Verschoor
I might got one. On Wednesday, October 2, 2013, wrote: I mean I want to buy the panel, not the module. It is to build my own SWAMP module with the CGS boards that I bought from Ken. ---In SergeModular@yahoogroups.com , sergemodular@yahoogroups.com > wrote: Seeking Swamp panel wit
2013-10-02 by freq63
I mean I want to buy the panel, not the module. It is to build my own SWAMP module with the CGS boards that I bought from Ken. ---In SergeModular@yahoogroups.com, wrote: Seeking Swamp panel with unicorn on bottom.
2013-10-02 by coalstar
http://carbon111.com/kracken.html I can hardly wait to touch this thing in the flesh! I'm already saving up...this is my take on it based on the specs and a Q&A session I had with Rex Probe after seeing the original announcement here.
2013-10-01 by freq63
Seeking Swamp panel with unicorn on bottom.
2013-09-14 by Gavin Pykerman
Animate for sale. 16 months old, 1 careful owner from new. Comes with PS2A power supply, 4.5” chassis box with rack ears, and bananas. £3,000 including postage in the UK, contact me for postage outside the UK.
2013-09-02 by John Duval
never thought I'd see this sale Mathew. :-( JD On Sun, Sep 1, 2013 at 6:36 PM, matfhew.carpenfer@... > wrote: #1 Animal (Oakland) New Timbral Oscillator, Precision Oscillator, Wave Multiplier, Audio Mixer with phase reverse switch, noise source with mod to bring S/H Source out, S
2013-09-02 by simulacreant
contat me at matfhewDOTcarpenferATgmailDOTcom --- In sergemodular@yahoogroups.com, wrote: #1 Animal (Oakland) New Timbral Oscillator, Precision Oscillator, Wave Multiplier, Audio Mixer with phase reverse switch, noise source with mod to bring S/H Source out, SSG, Dual Transient G
2013-09-02 by simulacreant
#1 Animal (Oakland) New Timbral Oscillator, Precision Oscillator, Wave Multiplier, Audio Mixer with phase reverse switch, noise source with mod to bring S/H Source out, SSG, Dual Transient Generator with signal in mods, Variable Q VCF, Universal Audio Processor Panel was tuned an
2013-08-27 by ifenton333
Hello, Reposting this before I finally go to eBay. This was to be my "starter" setup but it was not to be. Financial pressures, etc. Items are located in Finland. Includes Gator, Quadslope, M-boat, PSD, PS2A (EU), 20 patchcords. No rack ears. Looking for what I paid including imp
2013-08-26 by SergeModular@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the SergeModular group. File : /Kracken/Kracken Anatomy.pdf Uploaded by : keeperofthewogglebug nick.liebrecht@... > Description : Kracken functional description You can
2013-08-26 by Antonio Tuzzi
On 26/ago/2013, at 14:46, "cg_synth" sasami@... > wrote: I was talkng about the original Serge, not the CGS. CGS one is numbered differently to that. Ok! thank you --- In SergeModular@yahoogroups.com , Antonio Tuzzi wrote: > > for the original SERGE DTG too ? > > On 26/ago/2013,
2013-08-26 by cg_synth
I was talkng about the original Serge, not the CGS. CGS one is numbered differently to that. --- In SergeModular@yahoogroups.com , Antonio Tuzzi wrote: > > for the original SERGE DTG too ? > > On 26/ago/2013, at 14:24, "cg_synth" wrote: > > > Bipolar out jacks are simply wired to
2013-08-26 by Antonio Tuzzi
for the original SERGE DTG too ? On 26/ago/2013, at 14:24, "cg_synth" sasami@... > wrote: Bipolar out jacks are simply wired to pad D and pad P on the PCB. Volt per oct jacks are wired to pad E and pad R on the PCB. --- In SergeModular@yahoogroups.com , Antonio Tuzzi wrote: > > H
2013-08-26 by cg_synth
Bipolar out jacks are simply wired to pad D and pad P on the PCB. Volt per oct jacks are wired to pad E and pad R on the PCB. --- In SergeModular@yahoogroups.com , Antonio Tuzzi wrote: > > Hello friends > > Do you know if it's possible to modify a DTG to get a 1/v per OCT trackin
2013-08-26 by Antonio Tuzzi
Hello friends Do you know if it's possible to modify a DTG to get a 1/v per OCT tracking ? And for bipolar output ? thanks Antonio
2013-08-22 by Ancient Eyeball Recipe
From: "S V G" To: SergeModular@yahoogroups.com Sent: Thursday, August 22, 2013 12:11:05 PM Subject: [SergeModular] Re: release the Kracken !!! http://groups.yahoo.com/group/SergeModular/photos/recent/1577473948/view Stephen
2013-08-22 by S V G
http://groups.yahoo.com/group/SergeModular/photos/recent/1577473948/view Stephen
2013-08-21 by chip_puller
I'll be in to answer personally your inquiries and details of the new KRACKEN P-class module tomorrow afternoon (CT), Thursday, August 22nd. Thanks for your support .... Best to you all, Rex Probe President STS (262) 367-3030
2013-08-20 by ben
--- In SergeModular@yahoogroups.com, Mika Martini wrote: > > super! queremos ver ese JPG! we need to see this jpg! > > best > > Mika Martini aka Frank Benkho > Director Pueblo Nuevo Netlabel > -------------------------------------------------- > www.pueblonuevo.cl > www.twitter
2013-08-20 by Mika Martini
super! queremos ver ese JPG! we need to see this jpg! best Mika Martini aka Frank Benkho Director Pueblo Nuevo Netlabel -------------------------------------------------- www.pueblonuevo.cl www.twitter.com/mikamartini www.soundcloud.com/frankbenkho -------------------------------
2013-08-20 by Matthew Carpenter
Awesome news, Rex, thanks! On Tue, Aug 20, 2013 at 8:36 AM, chip_puller sts7@... > wrote: Say hey, fellow synth captains Here's a rendering of the new beast to warm the cockles of your sonic hearts -- The "KRACKEN" P-Class module Deep and dense for the intrepid of you willing to
2013-08-20 by chip_puller
Say hey, fellow synth captains Here's a rendering of the new beast to warm the cockles of your sonic hearts -- The "KRACKEN" P-Class module Deep and dense for the intrepid of you willing to go into the world of octal. I'll upload the jpeg and product features, so you will have mo
2013-08-16 by cg_synth
It sounds like your supplies are in need of re-capping. Condor or Power One supplies can be used, but with older systems you will probably need the additional 6V line. That was usually supplied by a 7806 chip jury rigged onto the base supply. Ken --- In SergeModular@yahoogroups.c
2013-08-16 by robert
hey does anyone have vintage serge power supplies that they have replaced with newer alternatives? i'm speaking of the kind with cinch-jones connectors - i know - ancient. i've got two for an 8 panel system,one is larger(5 outs) than the other(3). lately i've experienced i kind o
2013-08-07 by Dan Leuca
thanks man From: "david.salter@..." To: SergeModular@yahoogroups.com Sent: Wednesday, 7 August 2013, 16:26 Subject: RE: [SergeModular] (unknown) You could try Rapid From: SergeModular@yahoogroups.com [mailto:SergeModular@yahoogroups.com] On Behalf Of Dan Leuca Sent: 07 August 201
2013-08-07 by d_salteruk
You could try Rapid From: SergeModular@yahoogroups.com [mailto:SergeModular@yahoogroups.com] On Behalf Of Dan Leuca Sent: 07 August 2013 12:23 To: panels@... Subject: [SergeModular] (unknown) Hi, I have tried to find some slider pots in the Uk (farnell, RS, etc. but to no avail).
2013-08-07 by Dan Leuca
Hi, I have tried to find some slider pots in the Uk (farnell, RS, etc. but to no avail). I need your help. Thanks in advance. Slider pots needed: 10k linear- 81 each 100k linear- 42 each 1 meg logarithmic- 24 each Alpha or Alps brands will be good, but does not matter too much. t
2013-08-07 by avoosl_wuthoqquan
Hello All! I am requiring the exact dimensions for the M-Class panels. Mounting placement , panel thickness, panel width/height and any other information required to fabricate an M-Class format panel to fit within a current STS M-Boat system. If anybody can help or to measure one
2013-08-02 by darreljohansen
Thanks, John. I've been out of the loop for a while... dj --- In SergeModular@yahoogroups.com , John P wrote: > > Hey Darrel, > > The past 4 or 5 years, Rex has been selling Serge modules in an > "m-class" half-panel format that lowered the cost for entry-level buyers > and gave
2013-08-01 by Ancient Eyeball Recipe
hmmmm - let me think about this because one of the cases is just taking up space. The biggest problem is that I don't remember what I paid for it, and it will cost a lot to ship (I'd need to have it packed up by the local ups store, and it would be an oversized package). hello, I
2013-07-31 by notmuchupstairs
hello, I am interested in the wood case. if you decide to sell the case alone, please get in touch. thanks very much. --- In SergeModular@yahoogroups.com , Ancient Eyeball Recipe wrote: > > I"m hoping to buy a fenix 2 + 3 system. I'm not interested in being dissuaded - part of th
2013-07-31 by Ancient Eyeball Recipe
I"m hoping to buy a fenix 2 + 3 system. I'm not interested in being dissuaded - part of the impulse is just really changing things up, since I haven't been using the serge much, except for utility tasks. I have: panels: Blue Voice Blue control (vc-2) sequencer panel m-class - sqp
2013-07-27 by John P
The late Ivan Tcherepnin has the track 'Santur Opera' on the original Serge Modular tape.
2013-07-27 by John P
Hey Darrel, The past 4 or 5 years, Rex has been selling Serge modules in an "m-class" half-panel format that lowered the cost for entry-level buyers and gave people a bit more flexibility in designing their systems. I think the Dual Osc is the item below: http://www.serge-fans.co