Synth-DIY Yahoo! Groups Archives

Thread

Dual Transient Generator mods

2013-08-26 by Antonio Tuzzi

Hello friends

Do you know if it's possible to modify a DTG to get a 1/v per OCT tracking ?
And for bipolar output ?

thanks

Antonio

Re: Dual Transient Generator mods

2013-08-26 by cg_synth

Bipolar out jacks are simply wired to pad D and pad P on the PCB.
Volt per oct jacks are wired to pad E and pad R on the PCB.

Show quoted textHide quoted text

--- In SergeModular@yahoogroups.com, Antonio Tuzzi <antoniotuzzi@...> wrote:
>
> Hello friends
>
> Do you know if it's possible to modify a DTG to get a 1/v per OCT tracking ?
> And for bipolar output ?
>
> thanks
>
> Antonio
>

Re: Dual Transient Generator mods

2013-08-26 by Antonio Tuzzi

for the original SERGE DTG too ?

On 26/ago/2013, at 14:24, "cg_synth" <sasami@...> wrote:

Bipolar out jacks are simply wired to pad D and pad P on the PCB.
Volt per oct jacks are wired to pad E and pad R on the PCB.

--- In SergeModular@yahoogroups.com, Antonio Tuzzi <antoniotuzzi@...> wrote:
>
> Hello friends
>
> Do you know if it's possible to modify a DTG to get a 1/v per OCT tracking ?
> And for bipolar output ?
>
> thanks
>
> Antonio
>

Re: Dual Transient Generator mods

2013-08-26 by cg_synth

I was talkng about the original Serge, not the CGS. CGS one is numbered differently to that.

Show quoted textHide quoted text

--- In SergeModular@yahoogroups.com, Antonio Tuzzi <antoniotuzzi@...> wrote:
>
> for the original SERGE DTG too ?
>
> On 26/ago/2013, at 14:24, "cg_synth" <sasami@...> wrote:
>
> > Bipolar out jacks are simply wired to pad D and pad P on the PCB.
> > Volt per oct jacks are wired to pad E and pad R on the PCB.
> >
> > --- In SergeModular@yahoogroups.com, Antonio Tuzzi <antoniotuzzi@> wrote:
> > >
> > > Hello friends
> > >
> > > Do you know if it's possible to modify a DTG to get a 1/v per OCT tracking ?
> > > And for bipolar output ?
> > >
> > > thanks
> > >
> > > Antonio
> > >
> >
> >
>

Re: Dual Transient Generator mods

2013-08-26 by Antonio Tuzzi

On 26/ago/2013, at 14:46, "cg_synth" <sasami@...> wrote:

I was talkng about the original Serge, not the CGS. CGS one is numbered differently to that.

Ok!

thank you

--- In SergeModular@yahoogroups.com, Antonio Tuzzi <antoniotuzzi@...> wrote:
>
> for the original SERGE DTG too ?
>
> On 26/ago/2013, at 14:24, "cg_synth" <sasami@...> wrote:
>
> > Bipolar out jacks are simply wired to pad D and pad P on the PCB.
> > Volt per oct jacks are wired to pad E and pad R on the PCB.
> >
> > --- In SergeModular@yahoogroups.com, Antonio Tuzzi <antoniotuzzi@> wrote:
> > >
> > > Hello friends
> > >
> > > Do you know if it's possible to modify a DTG to get a 1/v per OCT tracking ?
> > > And for bipolar output ?
> > >
> > > thanks
> > >
> > > Antonio
> > >
> >
> >
>