Thanks, but… if only I had their emails…
:-))
Thank you for the support, Nick!
Il giorno 09/ott/2013, alle ore 17:52, nick.liebrecht@... ha scritto:
Hi Fernando,
I'm not really familiar with the DUSG, since I mainly build TKBs. I know that the DSG uses a lot of selected and matched parts, so maybe the best bet would be to contact Rex or Kevin Fortune.
Nick
---In sergemodular@yahoogroups.com, <fernandozarone@...> wrote:I have solved the TKB problem replacing the FWD/REW switch. The problem now is:
When doing the replacement, the brown wire on one side of the 3 poles of the switch went into contact with the RED wire (on the opposite side of the switch). The Clock was fed by the DUSG; after this, it was dead. I mean, no clock anymore.
I tried to replace the three ICs , nothing. Could you address me to a solution (transistors?)? Could I check which (if ) is broken without desoldering one by one? In that case, is there any replacement transistor I could use here in EU (those are US ones, very hard to find here…)
Please help me save this beast!!!
Thanks
F