New file uploaded to motmpanels
2003-09-12 by motmpanels@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the motmpanels group. File : /Josue Arias
Messages
Browse messages
Page 62 of 66 · 3299 messages matched
New file uploaded to motmpanels
2003-09-03 by motmpanels@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the motmpanels group. File :
Re: [motmpanels] Re: [oakley-synths] Screen issues - Was panel fit etc.
2003-09-01 by Larry Hendry
... I may not have been clear Jeff. 2/100 is the max I have seen on official MOTM panels. Some of our screen positioning errors are somewhat greater. Of
Re: [oakley-synths] Screen issues - Was panel fit etc.
2003-09-01 by Jeffrey Pontius
... I cannot imagine why a maximun of 2/100 of an inch offset on Stooge panels would have any impact on a person s impression of Stooge panels appearance.
Screen issues - Was panel fit etc.
2003-09-01 by Larry Hendry
Since we are on this subject, I would like to offer a little explanation on screening of Stooge panels. There will always be some room for error in this
Blacet Time Machine help
2003-08-28 by djbrow54
I just finished my Blacet Time Machine with the Stooge panel. It all appears to work first time! I don t understand the regen control, though. I expected it
Re: Stooge Panel / Oakley Board fit issue? - solution
2003-08-28 by djbrow54
It s really off by 1/16 . I measure 7/16 from the top of the board to the top of the panel. I suppose it has to do with how accurately I drilled the board
Re: Stooge Panel / Oakley Board fit issue?
2003-08-27 by tontaub
Hi Larry, Jeff, Dave, All, I m in the process to build some preliminary homebrew panels but will try to stick to MOTM standards as far as necessary and I m
Re: [motmpanels] Stooge Panel / Oakley Board fit issue?
2003-08-26 by Jeffrey Pontius
... There is an alternative that I have used successfully with Omeg pots. I have mounted a fiberboard washer between the panel and the front of the Omeg pot
Re: [motmpanels] Stooge Panel / Oakley Board fit issue?
2003-08-26 by Larry Hendry
This is not a Stooge panel issue, but an ANY panel issue associated with some Oakley boards. Some of the Oakley boards extend above the limit that Paul
Stooge Panel / Oakley Board fit issue?
2003-08-26 by djbrow54
I got my stooge panels today and the look great. I drilled the panel and finished building the Oakley VC Phaser. Works great. But, when I tried to install it
Dual Trigger Delay and MOTM-800 mods
2003-08-21 by djbrow54
I just built a dual trigger delay. I had previously uploaded the front panel design to the DJB folder. It works great and provides a 5 mS output trigger
Re: Patchell Vocal Filter
2003-08-15 by Bob
wow, I think I have that much time in just the resistors and diodes!!! Tonight I start on the caps. Howard ... installed? ...
Re: Patchell Vocal Filter
2003-08-15 by sasami@hotkey.net.au
... A vely long time :) At least 10 hours were spend stuffing the PCB - easilly more. Ken
Re: Patchell Vocal Filter
2003-08-14 by Bob
How long did it take you to get all the 100k resistors installed? ... haven t had ... of dual shaft ... __________________________________________________ ...
Re: Patchell Vocal Filter
2003-08-14 by sasami@hotkey.net.au
Well... I ve assembled the PCB. Finished it weeks ago in fact. I haven t had time to do anything about a panel yet though. I have a number of dual shaft 10k
Re: Patchell Vocal Filter
2003-08-13 by Bob
I am working on a panel design right now, and let me tell you it s big, MOTM format 8u wide. I can upload it but, take note, it isn t done. I would hate for
Re: [motmpanels] Patchell Vocal Filter
2003-08-13 by Scott Evans, Gen Mgr
Gary, Be sure to download and read the documentation on the Vocal Filter from Jim site ( http://www.silcom.com/~patchell/index.html ). There is a recommended
Re: [motmpanels] Patchell Vocal Filter
2003-08-13 by Scott Evans, Gen Mgr
I have one of Jim s Vocal Filter PCBs, but have yet to start on it. I think the module has some awesome potential. However, Jim himself has commented that
Re: [motmpanels] Patchell Vocal Filter
2003-08-13 by gareII@aol.com
Howard Thanks for this post, glad I belong to these mail lists or I d end up completely missing things like this. After briefly going thru the info, this looks
Re: [motmpanels] Re: New panels uploaded
2003-08-13 by Richard Brewster
Thanks for the upload, Dave. Well there is an infinite number of ways to make a mixer. I actually wanted the non-reversing attenuators, which can go quite
Patchell Vocal Filter
2003-08-12 by Bob
Hi all, I was just wondering if anyone out there was planning on or working on making one of those Patchell Vocal Filters.
Patchell Vocal Filter
2003-08-12 by Bob
Hi all, I was just wondering if anyone out there was planning on or working on making one of those Patchell Vocal Filters.
Re: New panels uploaded
2003-08-10 by djbrow54
I uploaded a DJB-readme.txt file which has a link to some photos and the schematic. I also put some photos there of the voltage monitor. I started off with
Re: [motmpanels] New panels uploaded
2003-08-09 by Richard Brewster
I see you added a FWR to my design, instead of the inverter function. Neat. Can we get a schematic? -Richard Brewster ... From: djbrow54
New panels uploaded
2003-08-09 by djbrow54
I created a DJB folder and uploaded 7 of my MOTM DIY designs: 2U CV Keyboard Interface module with multiples for JLH-822 2U Mixer / Spring Reverb / A440
Re: [motm] 24 awg hookup wire?
2003-07-09 by Richard Brewster
I found this sort of wire at Unicorn Electronics in Johnson City, NY, last week during a trip. I bought seven 100-foot spools of different colors in #22 gauge
aloha folks - diatonic converter, modulo magic,sequential switch
2003-07-09 by ask
aloha folks uploaded a panel design i ve done w/ suggestions from ken for the Modulo Magic pcb. would be intrested in hearing any comments. also i have
simple 1U cgs cascade mixer with 1 or 2 inputs
2003-06-29 by Jeffrey Pontius
I uploaded a Schaeffer 1U motm-style front panel design of Ken s cascade mixer (not for stair-stepping) into the cgs preliminary files (cgs yahoo groups site)
Re: Small knobs, ticked off
2003-06-25 by elle_webb
... You are right, as ever! I had to go and look, because I was sure there weren t any! I hadn t really paid attention to them - maybe because they are so
Re: [motmpanels] Small knobs
2003-06-25 by Larry Hendry
... I am measureing about 0.860 to 0.865 on my UEG. But, that is error prone since I am measuring from the knobs and not the actual pots. ... Actually, the
Small knobs
2003-06-25 by elle_webb
... The Radio Shack knobs may work. The part number is 274-415. They are US $2.50 for 4 knobs. Visually, they match the MOTM knobs, and they are very similar
Re: Drilling from Hell
2003-06-25 by elle_webb
... me, ... Drilling the holes will be a lot of work, for sure! For me, the time would be worth it, though, because the MOTM panels look nicer. I also like the
Re: [motmpanels] Re: Stooge monster panels and low $ switches
2003-06-24 by Larry Hendry
That s a darn good thing to consider that may sway toward the Schaeffer panel. That is one big lot of drilling. (brings new meaning to DIY) ... Larry ...
Re: Stooge monster panels and low $ switches
2003-06-24 by klinic2
The schaeffer cost for my panel design is 132.77 euros + VAT, discounts are 10% for 10 units, 20% for 20 units. I like very much the stooge that the schaeffer,
Re: Stooge monster panels and low $ switches
2003-06-24 by elle_webb
... the ... tell the ... inserts, ... Scott I have used the larger size for a couple of Oakley conversions, with great results. I ve seen these criticized as
Re: [motmpanels] Re: Stooge monster panels and low $ switches
2003-06-24 by Scott Deyo
There are 3/4 MOTM-style knobs at www.radioshack.com, as well as full-sized. If I recall, a pack of 4 small is $2.49, 4 large $2.89; the price goes down w/
Re: [motmpanels] Re: Stooge monster panels and low $ switches
2003-06-24 by Larry Hendry
... Well, I have to get quotes from metal shop, painter, and printer to make any pricing official. But, I will offer a ball park as long as no one treats it as
Re: Milton monster sequencer - feedback requested
2003-06-24 by tontaub
... mount ... This is what I tried to point out. ... in milton ... elle_webb was proposing a 2x5U solution for those who like to obtain additional trigger
Re: [motmpanels] Re: Milton monster sequencer - feedback requested
2003-06-24 by Josue Arias
Hi Again, A zig-zag pattern for the pots would be great but you can`t use pcb mount pots so lots of wiring is required. Also You`ll miss the gate buss or a
Re: Milton monster sequencer - feedback requested
2003-06-24 by tontaub
... that s mouser part.no. 506-PKES60B1/4 (page 721) ... EU folks look here (thanks to Sikorsky for pointing me there):
Re: Milton monster sequencer - feedback requested
2003-06-24 by tontaub
Hi All, ... considerung the rather wide voltage range we get from such a bank 10-11mm is way too small for me. I do have small hands but I don t feel
Re: Stooge monster panels and low $ switches
2003-06-24 by elle_webb
... That s what I figured...care to ballpark an estimate for an 8u panel in small volume, say 5 or 10? ... Great info - thanks for speaking up! The cost for
Stooge monster panels and low $ switches
2003-06-24 by Larry Hendry
... Without a doubt, if the group can decide on a single design, Stooge Panels, Inc. can blow away that $200 price. We have quietly in the background been
Re: Milton monster sequencer - feedback requested
2003-06-24 by tontaub
... the cheapest I found till now is at rs-components.com/.at @ about 4 EUR/pc. @ 25pc. That s better but will sum up quickly nevertheless. Michael. (still on
Re: Milton monster sequencer - feedback requested
2003-06-23 by elle_webb
... think they can`t work. We need smaller knobs, 10-11mm. max diameter. It s unfortunate that they re too big. Let us know if you find anything good. I
New file uploaded to motmpanels
2003-06-23 by motmpanels@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the motmpanels group. File : /Josue Arias
Re: [motmpanels] Re: Milton monster sequencer - feedback requested
2003-06-23 by Josue Arias
I got some ueg knobs, smaller version of the oficial MOTM knob. I think your design uses the same spacing than mine(.8 between pot centers) so they can`t
Re: Milton monster sequencer - feedback requested
2003-06-23 by elle_webb
... Glad to hear this. We ve got time, so the more discussion, the better. ... Adobe Illustrator. The Stooge guys prefer Corel Draw, but I don t have it. ...
Re: Milton monster sequencer - feedback requested
2003-06-23 by tontaub
Hi there, your proposal looks pretty impressive! For my part I m still not sure what way to go, but this seems to me closer than anything I saw or had in mind