Milton monster sequencer - feedback requested
2003-06-23 by elle_webb
The Milton sequencer looks like it will be a very interesting project, and a great complement to the USeq. If you re not familiar with the Milton, you can find
Messages
Browse messages
Page 63 of 66 · 3299 messages matched
Milton Panel (was: Re: -MOTM format panel uploded-)
2003-06-18 by tontaub
... Alpha (not ... At rs-components.at I found this Alps pot: 263-2996 I m having a bit of a hard time finding a supplier here in Central Europe. Michael.
Re: Milton Panel (was: Re: -MOTM format panel uploded-)
2003-06-18 by sasami@hotkey.net.au
Spectrol MOD149 (ala MOTM) will also work, as will a variant of Alpha (not sure what model#) Ken ...
Re: [motmpanels] Re: -MOTM format panel uploded-
2003-06-18 by Josue Arias
Thanks, THe 64x1 options would be awesome. I can`t find an easy way to do that, please keep me informed!1 Best regards, Josue. ... From: elle_webb
Re: -MOTM format panel uploded-
2003-06-18 by elle_webb
... This layout makes sense. I like this better than other layouts that I ve seen that have jacks at the top. I m considering two more options, though. First,
Re: [motmpanels] Milton Panel (was: Re: -MOTM format panel uploded-)
2003-06-17 by Josue Arias
Peter told me he uses REAN pots, same knobs as Blacet modules. Other 6mm D-shaft will work. The pots used are Panasonic(check the milton BOM) Best regards,
Re: [motmpanels] Milton Panel (was: Re: -MOTM format panel uploded-)
2003-06-17 by Josue Arias
... I`ve followed the .8 spacing between pots centers, I just emailed Peter Granader about the knobs question. The pots are 9mm pcb mount so knobs will have
Milton Panel (was: Re: -MOTM format panel uploded-)
2003-06-17 by tontaub
Hi Josue, ... looks nice! Only the trigger bus appears a bit too cluttered to me. I m playing around with this right now but don t have a better solution at
-MOTM format panel uploded-
2003-06-17 by klinic2
I just uploaded some panels in MOTM format. I`ve created a new folder in the files section: Josue Arias Designs I`ve included a preliminary version for the
New file uploaded to motmpanels
2003-06-17 by motmpanels@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the motmpanels group. File : /Josue Arias
New file uploaded to motmpanels
2003-06-17 by motmpanels@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the motmpanels group. File : /Cat Girl
Fwd: [motm] Stooge panel prices posted - please read
2003-06-15 by Larry Hendry
For those not on the MOTM list. My apologies to those having to endure my rambligs twice. :) OK Gents, If you visit the panel page at Wise Guy Synth, you
Stooge panels list updated - order deadline extended
2003-06-12 by Larry Hendry
The available Stooge panels list has been updated with everything that Moe and I currently have on the proposed-to-make list. You can find the updated list
Miniwave Expander Sold Out
2003-05-29 by Dave Hylander
As of today all the Miniwave Expander PCB s have been sold or are spoken for. I expect that there will be another run of boards in the future, but it may be
Blacet BZ2300 Panel
2003-05-27 by Dave Hylander
Thanks to John Blacet I discovered an extra jack on my panel design!! I corrected the design and posted it on my site. I also put up an alternate design that
more new panels (sorry for the incorrect subject line)
2003-05-26 by Larry Hendry
Sorry, I got the subject line wrong in the original post. I have added the new panels to the list that have been confirmed to me by Moe. I know he is working
Re: [motmpanels] CGS Wave Multiplier
2003-05-26 by Larry Hendry
I have added the new panels to the list that have been confirmed to me by Moe. I know he is working on others for many of you. So, there will be more panels.
CGS Wave Multiplier
2003-05-25 by Dave Hylander
Hi Scott, I was looking at your 2U Wave multiplier panel, and was wondering how you handled the mods for the pots that add in the Fold CV and Offset CV, and
Re: What Brand and Type of Knobs to be MOTM-comaptible?
2003-05-25 by schwarzbach2001
I m also looking for original MOTM knobs in EU, but they are hard to find. I found a company in Switzerland, they can order it for 1.95 CHF/p.knob but I have
Blacet Kits for MOTM panels
2003-05-24 by John Blacet
In addition to the ever popular Mini Wave (shipping now) and the hard to keep in stock Time Machine (shipping mid June, ordering begins June 1), we have added
Stooge Panels I'm Having Made
2003-05-24 by Dave Hylander
I m going to have the following panels made on this run of Stooge panels, in case anyone wants to join in and get the cost down. CGS - Wave Multiplier CGS-
What Brand and Type of Knobs to be MOTM-comaptible?
2003-05-23 by tontaub
Hi, where in EU can I obtain MOTM-like knobs? Thanks, Michael.
Stooge panels ordering for those who may be interested
2003-05-21 by Larry Hendry
I m not pressure selling here, just making sure no one who expressed interest gets left out because they may not keep up with the MOTM list. Here is the notice
Re: [motmpanels] POLY AS 1
2003-05-19 by MOTM Markk
give me some more details... You have 2 already working AS-1 s and are building 2 more? How long ago did you talk to Louis? He is pretty good with his word.
Re: Milton 4 x 16 sequencer question
2003-05-18 by tontaub
Hi, you may also have a look here http://www.scampers.com/cyndustries/milton_main.cfm Michael. PS: Modcan/Cynthia panels are 9 tall. So To squeeze that into
Stooge Panels - Dark Star Enhanced
2003-05-01 by Scott Evans, Gen Mgr
My appologies for the cross post if you are also on the main MOTM list. I am interested in ordering one Dark Star (enhanced version) for a Blacet module that
Stooge panel time approaching
2003-04-30 by Larry Hendry
I apologize if you have seen this already on the MOTM list since many of you may belong to both. It is almost Stooge panel time again. In the next couple of
Milton 4 x 16 sequencer question
2003-04-30 by elle_webb
Peter Grenader s sequencer project looks interesting. He s working with Ken Stone to get a set of boards made up for it. Here s the URL:
daytripping to schaeffer
2003-04-27 by supisuzoi
being a resident of this fine city of berlin, and having some panel design ideas floating around, i drove over to schaeffer last week to get a better idea of
RE: [motmpanels] cv cluster design upload
2003-04-26 by John Loffink
Looks good. Just FYI, I may be doing an alternate board version that gives a different distribution than the equal weighted 10K resistor ladder. I m thinking
cv cluster design upload
2003-04-26 by Jeffrey Pontius
I ve been working on a 2U panel for Ken Stone s cv cluster module, and have uploaded my current rendition to the motmpanels files, cgs subdirectory. Look for
Re: [motmpanels] Re: Mounting brackets
2003-04-23 by Larry Hendry
... Oversizing the jack holes is a no-no. The bracket must rest on the shoulder of the threaded bushing. If you drop off of it, you run the risk of
Re: Mounting brackets
2003-04-23 by Bob
I think the Jack mounting Idea is great. Perhaps make the holes a little oversized for a little play if the panel holes are slightly off... Or how about a
Re: [motmpanels] Mounting brackets
2003-04-23 by Larry Hendry
Thanks very much Howard for the photos. I have been considering the jack only mounting option, I was considering something almost exactly like you have
Mounting brackets
2003-04-23 by Howard Ulyate
I could have use some sort of Ken Stone compatable MOTM mounting bracket. I am sure that Larry would make something alot better than what I came up with today
Re: Re: Any CGS bracket interest
2003-04-22 by sasami@hotkey.net.au
From: Larry Hendry ... The holes are 0.15 in from the edges (top, bottom and sides) of the board in all of the standardised board sizes.
Re: [motmpanels] Re: Any CGS bracket interest
2003-04-21 by Larry Hendry
OK. Thanks to everyone that responded. It is good to see that Ken is adopting the 6 standard (see below). But, my existing brackets that are only 5 1/2
Re: Any CGS bracket interest
2003-04-21 by Bob
I think it s a good Idea, I have used your long brackets for mounting the Steiner and the Wave Multiplier boards, with little problem at all. But something
Re: [motmpanels] Any CGS bracket interest
2003-04-21 by Scott Deyo
Or just wire it up and let it hang ;) A jack-based bracket would be very useful. I did all sorts of shameful punk-rock things behind the panel before Howard
Re: [motmpanels] Any CGS bracket interest
2003-04-21 by gareII@aol.com
Yes..definately be interested. As Jeff mentioned,will any adjustments be needed for the modules that are pretty much socket based ? Like the ASR etc. Gary
Re: [motmpanels] Any CGS bracket interest
2003-04-21 by Jeffrey Pontius
Larry, ... A nice idea, and I m sure some people could make good use of them. However, to be honest (and Ken S. or others can disagreed with me), given the 10
Re: Any CGS bracket interest
2003-04-21 by sasami@hotkey.net.au
... At least I am adopting some standards now :) I m doing my boards 6 tall, and 1, 2 or 3 wide. Some of the older boards will be reworked to these
Any CGS bracket interest
2003-04-21 by Larry Hendry
I have one of Ken Stones PCBs and know of others how have been recently building these into their MOTM / Oakley format systems. I find that my PCB is long and
wave multiplier panel @ FPE
2003-04-09 by Jeffrey Pontius
Looks like someone s (on this list?) 2U CGS wave multiplier made the display section at Front Panel Express:
*** Oakley MOTM Format Modules For Sale ***
2003-04-08 by Josue Arias
Hi Charles, I`d like to buy the Wavefolder. Price is ok for me. PLease contact me if you still have the module for sale. Best regards, Josue Arias. ... From:
Oakley MOTM Format Modules For Sale
2003-04-07 by cstella4
I have two Oakley Sound Systems MOTM Format Modules For Sale. Both are built with Schaeffer Black Engraved Panels, 1% Metal Film Resistors and MOTM Alco Knobs.
New file uploaded to motmpanels
2003-04-07 by motmpanels@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the motmpanels group. File : /Blacet
file posting
2003-04-07 by bzzztraffe
I just finished posting 6 new panels, but for some reason they re nost posting right. They only show up as a 2k text file. Is there something I don t kno
New file uploaded to motmpanels
2003-04-07 by motmpanels@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the motmpanels group. File : /Cat Girl
New file uploaded to motmpanels
2003-04-07 by motmpanels@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the motmpanels group. File : /Blacet