Buchla 281 FPD MOTM 4 PCB version
2008-09-24 by Dave
Hi, I ve been trying to come up with a design for the Buchla 281 clone project available at e-music.com but am not so good at making panel designs.
Messages
Browse messages
Page 33 of 66 · 3299 messages matched
Re: [ModularSynthPanels] Klee Third Run Poll
2008-09-24 by Ben Stuyts
Hi Scott, ... If the other Scott :-) does a panel, I d definitely order a PCB. Your demos convinced me, very beautiful. Kind regards, Ben
Re: [ModularSynthPanels] Klee Third Run Poll
2008-09-23 by Scott Stites
Hey Scott, Right, one bit patterns allow the Klee to act like a normal sequencer, right down to the gate bus. All of that flies out the window once more bits
Re: [ModularSynthPanels] Klee Third Run Poll
2008-09-23 by Scott Juskiw
Yes, I see that, thanks for pointing it out. The random input appears to allow programming one bit into the shift register (serial programming). What I am
Re: Klee Third Run Poll
2008-09-23 by klstay
Well, I have a Klee2 kit waiting for the much hoped for 3rd PCB run and if Bridechamber does a panel I will buy it with or without those 16 CV inputs on it and
Re: [ModularSynthPanels] Klee Third Run Poll
2008-09-23 by Paul Lord
... manual switching of the 16 pattern switches in order to set a new pattern or to enable the 16 channels of the current pattern to be summed to the output. I
Re: [ModularSynthPanels] Klee Third Run Poll
2008-09-23 by Scott Juskiw
I ve been reading the Klee manuals and schematics and am very impressed with the design. If I understand correctly, this can do everything a conventional 16
Re: [ModularSynthPanels] Klee Third Run Poll
2008-09-22 by kwote uno
definately interested! ... -- ... http://www.kwotemusic.com http://www.kwotemusic.com/store.html
Re: [ModularSynthPanels] Klee Third Run Poll
2008-09-22 by David Moylan
I d be interested in 1, especially if Scott is getting a panel together. Dave
Klee Third Run Poll
2008-09-22 by Scott Stites
Hi all, I m interested to know if there is enough interest in this group to try a third run of electro-music Klee Sequencer boards. The main reason I ask is,
Re: [ModularSynthPanels] HPGL for Logic gate symbols
2008-09-14 by David Moylan
Sorry, meant to say it s _not_ quite correct or only correct in the OR case and since I have multiple boards I need to be able to differentiate.
Re: [ModularSynthPanels] HPGL for Logic gate symbols
2008-09-14 by David Moylan
Right, but + usually means or in boolean logic so it s quite correct, and I do have multiple boards I m going to wire up. If I had a flip flop module I could
Re: [ModularSynthPanels] HPGL for Logic gate symbols
2008-09-14 by Richard Brewster
I labeled the inputs as A and B and the outputs of my Quad Logic Gates as A+B. I meant the + symbol to be generic, knowing that I might change the chip, which
HPGL for Logic gate symbols
2008-09-14 by David Moylan
Long shot maybe but anyone out there happen to have HPGL files of common Logic gates: AND, OR, XOR? I m trying to do a panel for the CGS Quad Logic gates.
Re: [ModularSynthPanels] ChaQuO pot and switch wiring?
2008-09-14 by loopcycle
perfect, i had not seen that. thanks much, scott. ... From: Scott Deyo Subject: Re: [ModularSynthPanels] ChaQuO pot and switch
Re: [ModularSynthPanels] ChaQuO pot and switch wiring?
2008-09-14 by Scott Deyo
Did you see my fancy diagram on the ChaQuO page? I was confused too. I also posted one for the SubOsc. Scott Deyo The Bridechamber contact@bridechamber.com
ChaQuO pot and switch wiring?
2008-09-13 by loopcycle
I m almost done with this build, behind a bridechamber panel. Has anyone built this module yet? I m trying to suss out the pot and switch wiring. Any help
Re: [ModularSynthPanels] Fw: [motm] New Cabinet & Powersupply
2008-09-13 by Scott Juskiw
RDEL is 1 Megohm. RCO you have to calculate for your relays. I posted the following message to the MOTM group a long time ago. It lists the parts you need from
Re: [ModularSynthPanels] Fw: [motm] New Cabinet & Powersupply
2008-09-13 by Erez Yaary
As for CGS63, what is RDEL and RCO from components perspective? Wow can I calculate them and were to get the components afterwards. Many thanks. Thanks, Erez
Re: [ModularSynthPanels] Re: Ian Fritz AD/ AR PCBs!
2008-09-12 by Andrew Listmayer
Thanks both of you, that clears up a lot.
Re: [ModularSynthPanels] Fw: [motm] New Cabinet & Powersupply
2008-09-12 by Scott Juskiw
I strongly recommend you get a few of Ken Stone s power supply delay boards: http://www.cgs.synth.net/modules/cgs63_psd.html Although you may have a power
Fw: [motm] New Cabinet & Powersupply
2008-09-12 by James Elliott
All, I am about to build a new cabinet for my modular, and with that I was going to upgrade my powersupply. I want a power supply that will take care of ALL of
Re: [ModularSynthPanels] Re: Ian Fritz AD/ AR PCBs!
2008-09-11 by Scott Deyo
Just counting, it looks like 3 seconds of delay, and the ADR can get around 13 seconds, though Ian in the notes only specifies around 7. However, I used a 1M
Re: [ModularSynthPanels] Re: Ian Fritz AD/ AR PCBs!
2008-09-11 by waveguide@earthlink.net
Scott, While you are there, just our of curiosity what sort of durations are we talking about here for the ADR and Delay timing components?
Re: [ModularSynthPanels] Re: Ian Fritz AD/ AR PCBs!
2008-09-11 by waveguide@earthlink.net
Andrew, Not sure how newbie you are so I ve explained things you are probably readily be aware of. Discard whatever is common knowledge for where ever you re
Re: [ModularSynthPanels] Re: Ian Fritz AD/ AR PCBs!
2008-09-11 by Scott Deyo
It does, but it will continue sustaining (not releasing) as long as the gate is present. So if you want really snappy EGs and your gates are too long, you
Re: Ian Fritz AD/ AR PCBs!
2008-09-11 by andrewlistmayer
Thanks for the reply, but I still don think I m into the 21st century yet. Doesn t the envelope trigger when the input rises over a certain threshold, meaning
Re: [ModularSynthPanels] Re: Ian Fritz AD/ AR PCBs!
2008-09-11 by Scott Deyo
The monostable can do lots of things. It can make your gate into a trigger, or your trigger into a gate. So, if your sequencer sends out short triggers, you
Re: Ian Fritz AD/ AR PCBs!
2008-09-11 by andrewlistmayer
Can someone enlighten me? What is the point of the pulse delay? I would rather go for another AR envelope, as you could use that as a trigger delay for your
Re: [ModularSynthPanels] Re: group, panels, stuff
2008-09-11 by Scott Deyo
There are only two trimmers, v/ oct and hf trim, so it s just as easy as any other oscillator. Ian designed a great core that spans 15 octaves at .05% accuracy
Re: group, panels, stuff
2008-09-11 by shari_en_jin
Just out of asinine curiosity...would it even be worth my time and frustration to try and build a Doubledeka without an oscilloscope? I got a pretty decently
Re: [ModularSynthPanels] Ian Fritz AD/ AR PCBs!
2008-09-10 by waveguide@earthlink.net
Scott, Just read the posted docs for this module. Brilliant. I had been hoping to come across something like this for a long time. The multifunction
Re: [ModularSynthPanels] dot com
2008-09-09 by Scott Deyo
Not in stock now, but in 2-3 weeks. (How many times have I said that?) Cheers, Scott Deyo The Bridechamber contact@bridechamber.com http://www.bridechamber.com
Re: [ModularSynthPanels] group, panels, stuff
2008-09-05 by Scott Deyo
Not yet, but check out www.elby-designs.com and www.metalbox.com for some good ones. Scott Deyo The Bridechamber contact@bridechamber.com
dot com
2008-09-04 by gumbydamm_it
Hey Scott Just wondering do you have any dot com panels in stock? Thanks
Re: [ModularSynthPanels] Re: CGS sequencer programmer FPD
2008-09-03 by Scott Deyo
I m letting my original metal guys finish what they have right now -- Wogglebugs they missed, DoubleDekas, DotComs, and 2-pot brackets they forgot. After that,
Re: CGS sequencer programmer FPD
2008-09-03 by Dave
Great! thanks for the FPD :) Although if Scott is doing a panel for this I can wait it out... Scott, any idea when this panel will come to fruition? Will it
Re: [ModularSynthPanels] CGS sequencer programmer FPD
2008-09-02 by krisp
I have added the FPD file and some photos files section If you need any help on the construction give me a shout also I have some spare push buttons I used if
Re: [ModularSynthPanels] CGS sequencer programmer FPD
2008-09-02 by krisp
I will upload the .fpd file and some photos to the files section when I get time to find them cheers Paul ... From: Andrew Listmayer To:
Re: CGS sequencer programmer FPD
2008-09-02 by andrewlistmayer
Of course, by harass I meant make a casual mention of it and wait for him to chime in and say done! You rock!
Re: [ModularSynthPanels] CGS sequencer programmer FPD
2008-09-02 by Scott Deyo
Actually, the metal guys already have the layout for it, but I wasn t sure about pushbutton hole sizes. Maybe I ll just do .375 and people can drill them
Re: [ModularSynthPanels] CGS sequencer programmer FPD
2008-09-02 by Andrew Listmayer
Krisp1 made a nice 5U x 5U version. As always, maybe we can harass Scott until he makes some for us ;)
CGS sequencer programmer FPD
2008-09-02 by Dave
Hi, Does anybody have a FPD file for the CGS 59B preferably in MOTM format but any will do. Thanks, Dave
Re: [ModularSynthPanels] group, panels, stuff
2008-08-29 by Ti_
Took me a while to find em, but you can hear some wicked samples HERE and if the fancy hyperlink doesn t work, just do a search on the electro-music forum for
Re: [ModularSynthPanels] group, panels, stuff
2008-08-29 by david wright
i cant wait to play axel f with that thing! looks great scott n ian!! any sound samples to tease? sounds like the basis for a new modular for me! dave ... dave
Re: [ModularSynthPanels] group, panels, stuff
2008-08-29 by Erez Yaary
Any designs in frac or euro? Thanks, Erez Yaary erez@yaary.com http://www.yaary.com
Re: [ModularSynthPanels] BIG group, BIG panels, BIG stuff
2008-08-29 by James Elliott
You know which would be the witch s tits??? if you (Scott D.) could get a panel going for the future MPS (mega percussive synthesizer). There are a TON of
Re: [ModularSynthPanels] BIG group, BIG panels, BIG stuff
2008-08-29 by thomas white
BIG STUFF, BIG STUFF, BIG STUFFF!!!!!! I ve started working with a second metal fabricator, so that we can get a move on the JH stuff, the big guys (Klee,
Re: [ModularSynthPanels] group, panels, stuff
2008-08-29 by Ti_
Holy Guacamole Fatman!! That VCO is Nuckin Futs fo shizzle!!! I m so glad now that I didn t particularly bother to waste a whole years worth of spending
group, panels, stuff
2008-08-29 by Scott Deyo
Hello All, (Preface: I heard the request for a Bridechamber group, but I m not going to do that right now. Too much going on, and there s not a lot of other