New file uploaded to ModularSynthPanels
2009-06-24 by ModularSynthPanels@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the ModularSynthPanels group. File :
Messages
Browse messages
Page 22 of 66 · 3299 messages matched
Klee/MFOS panel momentary switches
2009-06-23 by andrewlistmayer
Hi, was just wondering: What size are the holes for the momentary switches on the Klee/MFOS seq panels? Any suggestions for what mouser part# would fit?
New Panels
2009-06-20 by Scott Deyo
Bridechamber new panels: Oakley Ring Mod Tellun Dunsel MFOS Sonic Multiplier DFA Inverters/ Mults CGS Dual ASR CGS/ Pugix Logic/ Dual ASR/ Mults Soonish: Klee
Re: JH Varislope Filter Panel
2009-06-20 by djbrow54
It s tight, but I used that spacing on my Chorus and Interpolating Scanner - basically 2 jacks and 2 potentiometers across a 2U panel. I d rather have it
Re: [ModularSynthPanels] Re: JH Varislope Filter Panel
2009-06-19 by Scott Juskiw
Thanks Dave, that looks good. I like the waveforms around the WAVE knob and moving the Clean/Dirty switch in line with the APF/LPF switches. You don t think
Re: JH Varislope Filter Panel
2009-06-19 by djbrow54
Nice set of enhancements. I agree with them all. I was working on a 3U panel myself with the small potentiometer spacing but like yours better. I adapted a
Re: [ModularSynthPanels] +Re:JH Varislope Filter Panel
2009-06-17 by Scott Juskiw
yes
+Re:JH Varislope Filter Panel
2009-06-17 by gino wong
Is Juergen taking orders on the board yet ?
JH Varislope Filter Panel
2009-06-16 by Scott Juskiw
I plan to build the JH Varislope Filter in July and have been putting together a few modifications as well as trying to figure out a panel. This filter can eat
Re: [ModularSynthPanels] Re: scrapping a Korg Mono/Poly
2009-06-10 by Louis van Dompselaar
The SSM2033 VCO chips should be quite useful and there will probably be stuff like 2SK30 FETs and matched transistor pairs in there.
Re: [ModularSynthPanels] Re: scrapping a Korg Mono/Poly
2009-06-10 by Samppa Tolvanen
... It *REALLY* was in a landfill? BASTARDS! Try http://www.vintageplanet.nl/ to evaluate the parts.. the trouble is that SSM2044 VCF is fairly common and VCO
Re: [ModularSynthPanels] scrapping a Korg Mono/Poly
2009-06-10 by John Mahoney
Definitely! There are some SSM chips in there. The SSM2044 VCF is worth maybe $15 (it s the one SSM that s fairly readily available), but the four VCO chips
Re: scrapping a Korg Mono/Poly
2009-06-10 by stevemodularland
its totally broken- would cost more to ship than I could sell for on eBay... only useful as parts... if there are any useful parts!
Re: [ModularSynthPanels] scrapping a Korg Mono/Poly
2009-06-10 by Samppa Tolvanen
... ALL! It s one of those synths You want to keep, even as non-functional or to get it fixed. There s nothing quite like X-mod and Sync both engaged and
scrapping a Korg Mono/Poly
2009-06-10 by stevemodularland
I found a MonoPoly buried in my backyard, in decent cosmetic but mostly dysfunctional shape... Is there anything on this thing worth salvaging aside from
Re: Living VCO
2009-06-02 by clickmrmike
As long as you re polling, what about the Thomas Henry AS21C LFO? Magic Smoke has the PCBs out now.... clickmrmike
Re: [ModularSynthPanels] Living VCO
2009-06-02 by Scott Deyo
I m doing something, but I m not sure what yet. Maybe a poll will happen, but not for a little while yet.... Scott Deyo The Bridechamber
Re: [ModularSynthPanels] Re: Neural Agonizer Pots
2009-06-02 by Scott Deyo
No, those are Alphas. I don t have the Spectrols on the site, but can sell them for $10 per, which is just about what they are at Mouser for quantities of 25.
Re: [ModularSynthPanels] Klee panel update?
2009-06-02 by Scott Deyo
truth be tel t, i ve been buried under orders, school and teething baby. the klee CAD at least made it to the fabricators, and 40 packets to the post office
Re: How Many of You DON'T Use Schaeffer?
2009-06-01 by tontaub
Hi! Years ago I was frustrated not being able to achieve decent results like one gets with silk screened face plates. I never got to the point to order a
Klee panel update?
2009-06-01 by Dave
Hey Scott, Just wondering what the status of the Klee seq panel and the CGS prog/seq panel is. Cheers, Dave
Re: Living VCO
2009-05-30 by wjhall11
I ve been writing Controller JH calles it the Driver. Sorry about that. wjhall
Re: Living VCO
2009-05-30 by wjhall11
Yeah - Will s a trip. These days he s filling blank books with poetry. When he gets out of school in a few weeks, we ll launch into building our four-section
Re: Living VCO
2009-05-30 by adaaxs
That kid of yours is something else. Actually a 7u panel is sensible if it is the main vco in the cabinet it is going into. When working on a synthi the VCO
Re: Neural Agonizer Pots
2009-05-29 by krelnarb
Great. Are the 249s the custom ones at the top of the Pots page? Thanks. Peter
Re: [ModularSynthPanels] Neural Agonizer Pots
2009-05-29 by Jeff Laity
I used Scott s 249 pots on mine and they fit great. (I forgot to order the 4-pot bracket, though.) ... NOTICE: This electronic mail message and its contents,
Neural Agonizer Pots
2009-05-29 by krelnarb
Hello Scott, I thought I d ask this here in case any one was building one of these; do any of the Bridechamber pots conform to the .2 spacing for the 4 PCB
Re: Living VCO
2009-05-29 by wjhall11
Hi Guys - On our site, we show a 4U version with some tiny (1/2 ) knobs. We re almost certain everything will fit behind the panel but we re going to do a
Re: [ModularSynthPanels] Living VCO
2009-05-29 by Jan-Ahrent Czmok
... Will you do a panel run for this design ? i got the living vco kit with the verniers and really like the design.. --jan
Re: [ModularSynthPanels] Living VCO
2009-05-29 by eric f
I think it s brilliant. Until I saw this, I wasn t sure about the dials, but now I am 100% sold. This panel design has me very excited to start on these
Re: [ModularSynthPanels] Living VCO
2009-05-29 by Jeff Laity
Nice design. I d prefer a panel without the Vernier dial, though. I like the mixed big and small knobs, and that the jacks are MOTM standard spacing. (And the
Re: [ModularSynthPanels] How Many of You DON'T Use Schaeffer?
2009-05-29 by Sam Ecoff
... I send them Illustrator files. Measurements on one layer, holes on another, graphics on another. For my own purposes (marketing, web site, etc.) I put
Re: [ModularSynthPanels] How Many of You DON'T Use Schaeffer?
2009-05-29 by Jason Proctor
... whoa, thanks for this. what file formats do they accept?
Re: [ModularSynthPanels] How Many of You DON'T Use Schaeffer?
2009-05-29 by Sam Ecoff
... I have been using Metalphoto of Cincinnati for the Synthasonic modules I make (Synthasonic.com) and have been very pleased. Far cheaper, far more durable,
How Many of You DON'T Use Schaeffer?
2009-05-28 by j_inform3r
Hello, I ve been telling myself I would come up with an alternative to Schaeffer for years but I always end up going with them. I guess because it s all I know
Re: [ModularSynthPanels] Living VCO
2009-05-27 by Scott Deyo
The ills have some designs they ve been working on: http://dragonflyalley.com/constructionJHLivingVCO.htm Scott Deyo The Bridechamber contact@bridechamber.com
RE: [ModularSynthPanels] Living VCO
2009-05-25 by David Ingebretsen
I uploaded my work in progress for a Living VCO FracRack size panel. It is 7.5 inches, or (5U wide). It has most of the options, following JH s Option 3
New file uploaded to ModularSynthPanels
2009-05-25 by ModularSynthPanels@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the ModularSynthPanels group. File :
Living VCO
2009-05-25 by adaaxs
I know this is down the road (wish it wasn t) but are there any ideas for JH living vco panels ? is it going to be one w controller and add ons or full three
Re: [ModularSynthPanels] Re: CGS CMOS Filter Panel Daydreamin'
2009-05-23 by Scott Deyo
Would be cool, but I ve found that I sell _many_ more panels if they don t have mods/ additions. The divergence/ spread would only be a pot, which I think
Re: CGS CMOS Filter Panel Daydreamin'
2009-05-22 by babysealclub
I d go 3U and add a simple LFO or two. Might be able to kludge them on a Psychco LFO pcb. TF
CGS CMOS Filter Panel Daydreamin'
2009-05-22 by Scott Deyo
Just thinkin about the Twin Wasp panel down the road a bit... With 8 pots, 2 rotaries and 6 jacks minimum, we re looking at 3U. 3U would leave a lot of space,
FS Module for Sale
2009-04-30 by babysealclub
I have a Thomas Henry SN Voice Module for sale. A cool module that combines a 1V/oct VCO with triangle and Pulse (with PWM) Outputs, An envelope generator, A
RE: [ModularSynthPanels] Re: favorite joystick / stick controller for XY controller use (Mouser #s in pos
2009-04-23 by Ian Smith
Hey flight- How much are you asking for the large 100k joysticks? I ve only been able to find 5k and 10k. -Ian Smith ...
Re: favorite joystick / stick controller for XY controller use (Mouser #s in pos
2009-04-23 by flightofharmony
Hello Steve! I m a joystick fanatic and have done a bit of research on available types. My favorite are these:
Re: [ModularSynthPanels] Re: JHaible interpolating scanner / Vibrato / Chorus panel finalized...
2009-04-22 by Scott Juskiw
Yes, saving space. That s exactly why most of the things I ve built in the last few years have been using small knobs. Not because I like fiddling with tiny
Re: JHaible interpolating scanner / Vibrato / Chorus panel finalized...
2009-04-22 by wjhall11
It didn t work - OK - it s here: http://www.dragonflyalley.com/constructionJHISandCV.htm
Re: [ModularSynthPanels] Re: JHaible interpolating scanner / Vibrato / Chorus panel finalized...
2009-04-22 by William J Hall
I ll do it this way... thanks. Bill
Re: JHaible interpolating scanner / Vibrato / Chorus panel finalized...
2009-04-22 by wjhall11
Well - that may be, but Your 3U version certainly saves space. And that s something we re running out of. I think there are advantages to both. Really, the
Re: [ModularSynthPanels] Re: JHaible interpolating scanner / Vibrato / Chorus panel finalized...
2009-04-22 by Scott Juskiw
But your 4U layout will probably win over more people in a battle of the panels . People seem to prefer the larger knob versions. I can smell another vote