this group is beyond dead...
2007-04-06 by nanobotdex
hey guys, i have been a member of this group for what feels like eons, but seriously, nothing ever goes on here. what can we do to stimulate any form of
Messages
Browse messages
Page 6 of 21 · 1043 messages matched
Add me to the Group Please!
2007-04-03 by Phillip Keller
Please add me to the Yahoo Group for Alesis synths. Thanks you - Phil
Re: [Andromeda_A6-ION] Sounds like sculpture?
2007-03-17 by s a
I havent heard scupture, but the A6 is great at doing ambient sounds, noises, pads. That s probably it s strongest point. I think that scupture s synthesis
Sounds like sculpture?
2007-03-17 by Koen Buytaert
Hey Logic has a softsynth sculpture. I wonder if sounds such as on this synth are possible and avaliable for the andromeda A6? I am in search of ambient,
Re: [Andromeda_A6-ION] LCD screen burn on Andromeda?
2006-12-21 by Jason Creek
Thanks for taking the time to respond, Ted. Sounds like a rare issue that might have gotten over-magnified. If the original writer (Carlos?) is reading, all
Re: [Andromeda_A6-ION] LCD screen burn on Andromeda?
2006-12-21 by Ted Slominski
there s a thread about it at: http://mailman.code404.com/mailman/ listinfo/a6 basically alesis has shipped a faulty batch of A6s and for those unfortunate
RE: [Andromeda_A6-ION] Re: Out of Tune! A6
2006-12-18 by Bob Weeks
Bugger _____ From: Andromeda_A6-ION@yahoogroups.com [mailto:Andromeda_A6-ION@yahoogroups.com] On Behalf Of dnaflr2 Sent: 18 December 2006 17:47 To:
Re: Out of Tune! A6
2006-12-18 by dnaflr2
I had a similar problem, it was a defective voice board which was replaced by Alesis. In fact I had 2 Andromedas with this problem. However these problems were
Re: [Andromeda_A6-ION] LCD screen burn on Andromeda?
2006-12-13 by Jason Creek
Hi, Ted, What is the new problem board? What characteristics do they have, and at what serial number do A6 s with new problem boards begin, approxmately?
Re: [Andromeda_A6-ION] LCD screen burn on Andromeda?
2006-12-12 by Ted Slominski
this is similar to what happened to mine. i would leave it on quite a bit. it crashed at one point so i cycled power, came back... there was some hiss on the
Re: [Andromeda_A6-ION] LCD screen burn on Andromeda?
2006-12-12 by s a
That happend to me before. I had left the A6 on for a couple of days and this burn-in type of behavior occured. It went away eventually. Jussi Valter Aleksei
LCD screen burn on Andromeda?
2006-12-09 by Jussi Valter Aleksei Väisänen
Hello, I propably overloaded the Andromeda OS with a bit too much things going on in the midi department, then it kind of hanged. I switched the unit off, then
Re: Andromeda sequencer problem
2006-11-26 by steffengrondahl
I ve investigated the problem futher. It seems like the use of sustain pedal and not playing legato disables the monleg. I get the same behaviour (the
A6 Sighting
2006-11-26 by its_peake
http://wip.warnerbros.com/foryourconsideration/ Not as funny as the previous items by the same folks, but worth seeing. An A6 shows up in a talk show band.
Andromeda sequencer problem
2006-11-24 by steffengrondahl
I m facing a problem with the Andromeda sequencer when using the sustain hold pedal. The problem is: For a monophonic program I ve made simple 4 step sequence,
RE: [Andromeda_A6-ION] Re: Out of Tune! A6
2006-11-13 by Bob Weeks
Yep I would love to! But I ll make do with the Andomenda until I win the lottery! Actualy a Memory Moog would do Bob ... From: Andromeda_A6-ION@yahoogroups.com
Re: Out of Tune! A6
2006-11-13 by Andrea TONI
gosh what a remark !!! ... then take 16 of them and play them in poly .. see how u go :-)))))))))) Regards ... Andrea.TONI@rssd.esa.int
RE: [Andromeda_A6-ION] Re: Out of Tune! A6
2006-11-09 by Bob Weeks
Thanks they both are but it still is a bugger to hget in tune. Once it s been on for a bit and I use the auto tune - Osc function it s much better. ... From:
Re: [Andromeda_A6-ION] Re: Out of Tune! A6
2006-11-09 by mhz@io.com
be sure temp and background tuning is set to on . cheers
RE: [Andromeda_A6-ION] Re: Out of Tune! A6
2006-11-09 by Bob Weeks
I have a MS20 and that is more stable than the Andromeda and that s 26 years old! Looking at the tune tables everything is in tune but it s not! Still takes
Re: Out of Tune! A6
2006-11-09 by Shawn
You should check to see that the temperature tuning is on. Once the Osc s get warm, they tend to drift. (All vintage analogs do this.) It adds a great detuned
Out of Tune! A6
2006-11-08 by Bob Weeks
My A6 takes ages to get in tune on startup I have to go through the auto tune 4 ot 5 times to get the top notes in tune. Tt sounds ok up to C5 then it sounds
Introduction
2006-11-02 by casaroyale
Hi all, thanks for the group - I just joined up. I ve owned my A6 for about a year, and have written 20 something patches since - mostly emulations of sounds
Re: How to do slides & accents on Andromeda.
2006-10-23 by analog_alpha
Well, running Andromeda through midi and using FR777 doesn t really cut it. Putting a patch in monophonic mode somehow , kind of makes the 303 slides, but how
How to do slides & accents on Andromeda.
2006-10-16 by analog_alpha
How do I do slides and accents on Andromeda? Is there a way to use external sequencer to trick Andy into 303? I would think that I for sure would have to have
New member and a question about Legato
2006-08-30 by Federico Cimador
Hi everybody, I bought recently an Andromeda and I would like to share with you opinions and suggestions. I have a question.I would like to know how to emulate
Instrument definition?
2006-08-23 by brain_111ca
I am searhing for the A6 instrument definition file (for Cakewalk). Based on the searh in the archive it did exist at some point in the Files directory but I
Re: A6 & Ion PSUs are noisy!
2006-07-20 by Moreno
Hi Lucin, I could guess it s a problem with the electricity because when the Ion and the A6 were switched off it was making anyway ground noise. And when i
Re: [Andromeda_A6-ION] A6 & Ion PSUs are noisy!
2006-07-06 by s a
How do you know that it is the power supply? Are you sure that you are not getting RF? I recently experienced this with my elektron Machinedrum. I found out
Just got my bachelor/arts
2006-06-30 by muriel-berggren487@crispchippies.info
Just got my Masters in Science and didnt even have to turn up to class... how good is that? Just phoned these fellows 1 (801)697-0461 and they got me fully
Re: A6 & Ion PSUs are noisy!
2006-06-23 by Moreno
It s ok! Sorry, I should have googled before posting. It s not really A6 s or Ion s fault (and my Yamaha FS1R also).... seems anyway that they are more
A6 & Ion PSUs are noisy!
2006-06-23 by Moreno
Hello guys, I have an A6 and an Ion... and i was wondering if any of you found a solution to remove that eletricty noise! I already bought a Power Bright
Cleaning up the A6 inside, etc.
2006-06-19 by Al_haidar
Hi Dudes, I ve had the A6 for about a year and it s been just fantastic. I m discovering and making new sounds and tweaks almost every week. I have three
Re: the Andromeda A6 in drum&bass (how well does it handle bass sounds?)
2006-06-19 by Cold Jazz
Thanks everyone for their answers! Ill probably have to spend some more time with the A6 in the music store. But I think I would rather go for the A6 than the
Re: the Andromeda A6 in drum&bass (how well does it handle bass sounds?)
2006-06-17 by squareform_909
... beasts, ... SE1X ... hear ... good,ruff D&B when I hear it) the Andromeda will handle bass for D&B really, reall well (there is even a preset on the
Re: the Andromeda A6 in drum&bass (how well does it handle bass sounds?)
2006-05-28 by Moreno
Hi CJ, As grnzz knzz (hmmrff lol) stated, each synth has its own character and their own advantages in the field of basses. The A6 is great for basses with a
Re: [Andromeda_A6-ION] the Andromeda A6 in drum&bass (how well does it handle bass sounds?)
2006-05-21 by DM
Hey CJ, Can only talk to the A6 of the 3 you mentioned, though I do have enough other VA (Virus, Micron, Novation), FM, ROMpler/PCM synths. Of the whole bunch
Re: [Andromeda_A6-ION] the Andromeda A6 in drum&bass (how well does it handle bass sounds?)
2006-05-20 by hans wurst
hi, ive got an A6, a sunsyn and a se-1 (and an atc-1 as well). every synth has its own charakter and special talents for specific kinds of sound. but for
the Andromeda A6 in drum&bass (how well does it handle bass sounds?)
2006-05-20 by Cold Jazz
Hi everyone, I ve been considering investing in a real analogue synth for the studio (as a compliment to my MS-20 and TeeBee). I ve been looking at the Moog
Re: A6 as Midi controller
2006-05-19 by mimulon
I thought the A6 s knobs didn t send CC for the most part, they sent NRPN (2 byte data?). I can t really remember. Anyone use an A6 knob as a controller? ...
Re: General Observations
2006-05-19 by mimulon
I feed my A6 through external filters this way: Either MIDI out to an Encore Expressionist, which converts MIDI to CV. The CV sets the filter cut-off, and also
RE: [Andromeda_A6-ION] Re: General Observations
2006-04-17 by Bob Weeks
I have one of these Moog Low pass filters. I use it on my DX7/TX7/TX802 Stack now that s Nice. I have never thought of using it on the A6, is there a way to
Re: General Observations
2006-04-15 by nanobotdex
This post brings up some interesting questions. First, have any of you guys experimented with using an external Moogerfooger MF-101 Low Pass Filter? I have
General Observations
2006-04-10 by Bob Weeks
Good day all, My name is Bob I am a new member to A6-ION. I have had my A6 for nearly a year and use if live and in the studio, in fact it gets a right
Re: [Andromeda_A6-ION] Andromeda beta software 1.40.13?
2006-03-23 by s a
I believe that there is a link in the doc itself, but alas the file is no longer there. I m very interested in the beta OS as well. If anyone has it, can you
Re: Andromeda: sustain hold
2006-03-23 by steffengrondahl
... Thanks - yes it works perfectly :-)
Andromeda beta software 1.40.13?
2006-03-18 by droolmaster0
I see this mentioned in Mike Peake s Using A6 doc, but the link seems to be dead. Is this version still available somewhere? Just got my Andromeda
Re: [Andromeda_A6-ION] Andromeda: sustain hold
2006-03-12 by Greg Waltzer
Use a latching footswitch instead of a momentary switch.
Re: pedal connector
2006-03-12 by steffengrondahl
... Oh I forgot I m talking about the Andromeda, not the Ion. Sorry.
Andromeda: sustain hold
2006-03-12 by steffengrondahl
Is it possible to get keyboard hold simply without having to keep the sustain pedal pressed down ? Its Ok to use a pedal, but then I would like to just press