My AN1x arrived & I need replacement keys
2006-09-16 by bob_at_work_2000
Hello my new associates! My 1st AN1x arrived by international UPS and guess what, it was damaged due to bad packing......So does anyone have a source for
Messages
Browse messages
Page 64 of 268 · 13386 messages matched
[AN1x] Re: Using a foot for scene switching?
2006-09-16 by Jon
... The FS is sending MIDI CC #003 with a value of 0 or 127 to swap Scenes; The FC is sending MIDI CC #003 with the full range of values from 0-127, i.e.,
Re: [AN1x] Switch cleaner or contact cleaner??
2006-09-16 by Jeff
... Hello Arthur ! if your cleaner is made for electronic use it will work . Have a look at the warnings and directions for use on the canister back (harmful
Re: [AN1x] Re: Using a foot for scene switching?
2006-09-16 by Jeff
... Hi Lou ! i don t think so ... push for one scene , push again for the other one , and probably a third push on this (censored :-) ) pedal switch will turn
Re: [AN1x] Re: Switch cleaner or contact cleaner??
2006-09-16 by Bob S.
Yep, that s what I used ! Bob El Segundo, CA ... From: Jon To: AN1x-list@yahoogroups.com Sent: Friday, September 15, 2006 5:06 PM Subject: [AN1x] Re: Switch
Re: Switch cleaner or contact cleaner??
2006-09-16 by Jon
... I think this is what you want: http://tinyurl.com/kldxu -- the full URL is http://www.radioshack.com/sm-tv-tuner-control-cleaner-and-lubricant--pi
Switch cleaner or contact cleaner??
2006-09-15 by Arthur Alexander Crichton
Hi, On this forum I was recommended to use contact cleaner to clean the inside of the knobs and buttons because I am having problems with my AN1x. After a
Re: Using a foot for scene switching?
2006-09-15 by Jon
... ... ahem, switch ... I don t ... menu. ... value ... Scene, ... ) ... steps but ... to a ... Foot ... Great, glad it works for you. ... so
Re: Using a foot for scene switching?
2006-09-15 by lou.kadassy
... SceneSel. ... certain the Layer value ... Switch Normally ... You re right, Jon! It works beautifully. The only downside is that *both* scene lights are
Re: [AN1x] Re: Using a foot for scene switching?
2006-09-15 by Jeff
Hello Lou ! when i assign the mod wheel as i ve described previously the sounds changes continuously between both scenes . It s like having a balance pot .
Re: [AN1x] User manual
2006-09-15 by Jeff
OK, but i have french and english manuals too ! I think it s because of the EEC rules ... I don t need no german one and i don r want to discard it . Cheers
[AN1x] Re: PLG-ANx and AN Expert Editor Library work
2006-09-15 by jburns@sover.net
Thank you for your input. I guess I ve been doing it the right way. I do have perhaps over a thousand to go through and I do set the scanned namks aside. It
Re: Using a foot for scene switching?
2006-09-14 by Jon
... It works just fine here. Select both Scene switches so they are active and try again. Make certain the Layer value for your Voice is Single. I m using a
[AN1x] Re: Using a foot for scene switching?
2006-09-14 by lou.kadassy
I m not sure it will work (I ve not tried yet because I don t have a momentary switch handy). However, the transition you re talking about should still take
[Fwd: Re: [AN1x] Re: Using a foot for scene switching?]
2006-09-14 by Jeff
I forgot one thing, very important : if you don t find a Yamaha footswitch for your synth and you buy an unbranded one be careful to choose an universal
Re: PLG-ANx and AN Expert Editor Library work
2006-09-14 by Brian Rost
... I think I understand your problem as wanting to go in to a mixed up library and drag patches from that into multiple cleaned up files. You can t do
Re: [AN1x] Re: Using a foot for scene switching?
2006-09-14 by Jeff
... YES ! OF COURSE ! Because the hardware inside your synth is waiting for an edge (transition between the 1 and 0 state or the opposite) , not a logic
Re: PLG150-AN affecting Motif's performance
2006-09-14 by Brian Rost
... ways around it? It is perfectly normal for the Motif to respond more slowly in ALL modes when selecting new PLG voices. Remember it s a separate
Re: [AN1x] User manual
2006-09-14 by Summa
The french and english version of the AN1x manual is avaiable at the Yamaha Manual Library... http://www.yamaha.co.jp/manual/french/index.php ... -- CZ/VZ
User manual
2006-09-14 by Jeff
Hello ladies and gentlemen! I have a german user manual (a.k.a. Bedienungsanleitung) . I prefer french or english, so i can give it to any german speaking user
Re: [AN1x] Using a foot for scene switching?
2006-09-14 by Jeff
Hello Lou ! do you have the user manual? If not, according to page 96 you can assign a controller to the scene control : 1. turn the matrix knob to the lower
Re: Using a foot for scene switching?
2006-09-14 by lou.kadassy
... release to hear the 1st ... Obviously, Morphing can be ... simultaneously. Might get ... Jon, many thanks for your response. Unfortunately, it doesn t work
Re: Using a foot for scene switching?
2006-09-14 by Jon
... Yes, to both. On the AN1x, set the [EDIT ROTARY] Knob to the UTILITY/SETUP menu. Press Ctrl Device until you see FS displayed. Press Ctrl No to change the
Re: [AN1x] A 'glitch' at the beginning of the VCA attack!?!?!?
2006-09-14 by Pete Nalda
... Ok, now I ve noticed this in a lot of synths, and not just the an1x, if you have the VCA s volume up to 127 it seems to pop at the beginning of the note.
Using a foot for scene switching?
2006-09-14 by lou.kadassy
Hi there everybody. I just got an AN1x - great machine! But you already know that, huh? I m programming sounds for a live gig. Since I hate switching voices
PLG150-AN affecting Motif's performance
2006-09-13 by Steve Cooke
I ve got a PLG150-AN installed in my Motif Classic, but I ve found using it a frustrating experience. That s because the PLG board appears to impair the
Re: [AN1x] A 'glitch' at the beginning of the VCA attack!?!?!?
2006-09-13 by Jon
... dissapears when the VCF is turned all the way down so its something before the filter or the filter itself perhaps. Do you mean when the VCF Cutoff is
Re: [AN1x] A 'glitch' at the beginning of the VCA attack!?!?!?
2006-09-13 by Rob Hill
Thanks Jeff but I know the DX7 uses operators (was my first of many synths) but a similar thing happend on the DX as a side effect of the waveform resetting
Re: [AN1x] A 'glitch' at the beginning of the VCA attack!?!?!?
2006-09-13 by Rob Hill
Thanks for the response but it seems to be more noticable on bassier sounds and dissapears when the VCF is turned all the way down so its something before the
Re: [AN1x] A 'glitch' at the beginning of the VCA attack!?!?!?
2006-09-13 by Jeff
... Hello Rob ! have a look at the feedback setting is a good idea. The synthesis method of the DX7 was very different with FM (a sine wave modulating the
Re: [AN1x] Query re AN200
2006-09-13 by Desdinova
... Yep, that s how I use it. However, the sounds ARE attached to a pattern#, that s just how it s laid out. You don t need to have a pattern running to use
Query re AN200
2006-09-12 by Steve Cooke
Hello there, Is it possible to use the AN200 as a straightforward sound module separate from all the beats and arpeggios in the patterns? I see that each synth
Re: [AN1x] A 'glitch' at the beginning of the VCA attack!?!?!?
2006-09-12 by Jon
... No, perhaps somebody else has... ... the same point every time the key triggered. There was a setting in the DX7 that would have the waveform drift free
Re: [AN1x] A 'glitch' at the beginning of the VCA attack!?!?!?
2006-09-12 by Rob Hill
._,_._,___
Re: [AN1x] Another problem with AN1x
2006-09-12 by Rob Hill
Could it be a sticky ribbon? Jon wrote: --- In AN1x-list@yahoogroups.com, Arthur Alexander Crichton
Re: [AN1x] Another problem with AN1x
2006-09-12 by Jon
... Of course you realize transfering a Voice from AN1xEdit will place the program location into which you transfered into EDIT mode, right? ... You mean
Re: [AN1x] Another problem with AN1x
2006-09-12 by Arthur Alexander Crichton
Thanks for your reply, but I haven t edited anything before I switched the synth off. All the presets I go through on the synth have the edit indicator on the
Re: [AN1x] Another problem with AN1x
2006-09-12 by Jon
... Because the AN1x is smart enough to remember your last edit when powered off. This is normal behaviour. Try this: Select any Voice - the EDIT indicator
Re: [AN1x] Another problem with AN1x
2006-09-12 by Arthur Alexander Crichton
To answer your question to what MIDI interface I am using, I am using the MIDIMAN USB 2X2 MIDISPORT with the latest drivers. The program I am using is AN1xEdit
Re: [AN1x] Another problem with AN1x
2006-09-12 by Arthur Alexander Crichton
Hi Bob, I don t turn any knobs or buttons, the problem happens when I switch on the AN1x after a few hours. When I switch the synth on, the edit indicator
Re: [AN1x] Another problem with AN1x
2006-09-12 by Arthur Alexander Crichton
Hi, Jon I have noticed that when I switch the AN1x on after it being off for a while the edit indicator appears on the display screen even though I have not
Re: [AN1x] Another problem with AN1x
2006-09-12 by Jon
... Arthur, It s not a bug, it s typical wear and tear. As you ve probably learned by now, but I ll restate it anyway, turning a Control knob while pressing it
Re: [AN1x] Another problem with AN1x
2006-09-11 by Bob S.
Doe this occur only when you turn the control/data encoder to a new position? If so, then the encoder just need to be cleaned or replaced......all my later
Re: [AN1x] Another problem with AN1x
2006-09-11 by Arthur Alexander Crichton
I am beginning to wonder if the problem is due to a bug in my AN1x as its very tempremental - one minute the sounds are ok with the VCF cutoff behaving itself
Re: [AN1x] Another problem with AN1x
2006-09-10 by Jon
... Which bank of user Voices are you loading into the AN1x? And did ou download the bank from the Files section for AN1x-list here at Yahoo! GRoups or
Re: [AN1x] Another problem with AN1x
2006-09-10 by Arthur Alexander Crichton
Thanks for all of the replies but I have noticed that when I do an entire factory reset and load the original sounds the problem is solved until I load in the
Re: [AN1x] PLG-ANx and AN Expert Editor Library work
2006-09-10 by Jon
... I m not certain, but I think Jeff is refering to the FAQ? On Page 100 of the AN1x Owner s Manual is the procedure to recall the Factory Settings. Option 4
Re: [AN1x] Re: Clicks and crackles problem on AN1x
2006-09-10 by Daniel Mandic
Hi! Check your amplifier. Mine is crackling when playing hard. Must be the A/B Switch (relais-controlled) Best Regards, Daniel Mandic
Re: [AN1x] Another problem with AN1x
2006-09-09 by Jeff
Hello Arthur! this new problem is not very serious : the pots must be dirty, just clean them (inside!) with a contact cleaner sold in any electronics shop.
Re: [AN1x] Re: Sustain&Volumepedal of AN1x sending no MIDI ?
2006-09-09 by Jeff
Another idea : do you send your MIDI data through a merge box ? Many merge boxes use to filter drastically the incoming data such as aftertouch or any