Yahoo Groups archive

Emu XL-7 & MP-7 User's Group

Index last updated: 2026-04-14 00:15 UTC

Message

Re: How to edit individual note lengths; How to set up note lengths in step mode

2005-02-06 by steve_the_composer

I looked at the file in Sonar. Track 4 has two notes at with a 
duration of 96 as follows:

1:01:00 F5 vel = 92 dur = 96
1:03:96 E5 vel = 58 dur = 96

I have Sonar set to the default 384 ticks per beat. In 4/4:

384 ticks = 1 quarter note
192 ticks = 1 eighth note
96 ticks = 1 sixteenth note

The pattern you have shows:

(1) a sixteenth note at measure 1 beat 1 tick 0
(2) a sixteenth note (100% gate) at measure 1 beat 3 tick 96 (a 
sixteenth of a beat after the third beat of the measure).

Perhaps you were at sixteenth-note resolution with 100% gate. I'm 
not sure where the 76 ticks (in the previous pattern you posted) 
came from if it was 100% gate.

Hope this makes sense.

--Steve

--- In xl7@yahoogroups.com, "malik" <malik_martin@h...> wrote:
> 
> thats funny cause it wasnt saved at 76 lemme try again maybe i 
made a
> mistake while saving the patch and sent you an older one im gonna 
send
> you a bassline without the gate because the gate isnt trigggering
> anything... both notes on track or channel 4 are at 100% gate
> 
> http://www.simbiotrecords.com/P.0.000-Bass.mid

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.