Re: [vintagesynthrepair] Re: JX3P sliders
2010-06-25 by GB
They only had the brilliance one, so I ordered 3 of those. Between them and the pieces I have laying around I can probably construct something suitable (I
Messages
Browse messages
Page 55 of 155 · 7723 messages matched
Re: [vintagesynthrepair] Re: JX3P sliders
2010-06-25 by vco3@aol.com
HI I think roland has all the slider values for the jx3p except the seq rate slider. YOu could get another value of the same slider from roland and just swap
Re: [vintagesynthrepair] Re: JX3P sliders
2010-06-25 by GB
... That s crazy talk. ;-) That never occured to me. Yes I just called them and they have parts that are close enough that I think I can make it work. The
Re: 30 Days Free Trial Project Management Software
2010-06-25 by ron60rock
Hello? THIS IS SPAM! Is this group MODERATED?
Re: JX3P sliders
2010-06-25 by aexns
You can also look them up at: http://www.vintageplanet.nl/pages/roland.html I have ordered from them in the past for some rare and hard to find retro parts.
Re: [vintagesynthrepair] 30 Days Free Trial Project Management Software
2010-06-25 by Frank Simon
This is SPAM please stop ... From: shanewarner66 To: vintagesynthrepair@yahoogroups.com Sent: Friday, June 25, 2010 5:37 AM Subject: [vintagesynthrepair] 30
Re: JX3P sliders
2010-06-25 by Scott
... Hi GB...What would help on these would be : The travel in MM of the sliders and, the distance between the leads on the sliders. Have you tried RolandUS for
JX3P sliders
2010-06-25 by GB
I just rescued a JX3P from the chopping block and I ve managed to put it back together and make it functional of sorts. I need all of the sliders and 2 of the
Re: Free Project Management Software
2010-06-24 by Quazimodo
What does this have to do with Vintage Synths Shane?
Free Project Management Software
2010-06-24 by shanewarner66
Hi All definitely recommend Project Drive. It is the most simple, yet powerful project management software out there. It makes
Re: [vintagesynthrepair] Yamaha WX5 circuit
2010-06-23 by brian walker
Hi When I brought my WX7 workshop manual it was around £12.50 direct from Yamaha They are a friendly bunch, drop them a line Brian ... From: Royce
Yamaha WX5 circuit
2010-06-23 by Royce
Anyone have a schematic for a Yamaha WX5 controller??? Particularly interested in the mini din pin out but I need some other stuff as well. Thanks Royce
Success with Project Management Software
2010-06-23 by shanewarner66
Drive Your Project to Success With http://www.project-drive.net To Get Your Free 30-Day trial For free account go to
Re: [vintagesynthrepair] Re: Yamaha DX7II power supply schematics
2010-06-23 by PeWe
Hi ! Is it eventually possible sending the schematics to me too, please ? ha-pewe@gmx.de thx in advance PeWe
Re: Korg DW-6000 supply voltages?
2010-06-23 by dr_sound_il
I have DW-6000 service manual. Send me your e-mail.
Re: Yamaha DX7II power supply schematics
2010-06-23 by dr_sound_il
I have DX7II-FD/D schematics. Send me your e-mail.
Re: Yamaha DX7II power supply schematics
2010-06-22 by Nicolas
Hi, Thank for the link but there only the pcb layout, not the schematics. Nicolas
Special Offer
2010-06-22 by shanewarner66
For More Information about Project Drive And To Get Your Free 30-Day Trial Get it now!!!! Try it today Project management software by launched
Re: Korg DW-6000 supply voltages?
2010-06-21 by alexandrodeexu
Try to download owners manual for 6000 ,it s possible to do free unfortunatly i have no idea that it may be ( I had other problem with my one see service
Re: [vintagesynthrepair] Re: Korg DW-6000 supply voltages?
2010-06-20 by gnw
Thanks! Following the docs for the DW-8000, I m seeing 15 VDC off the supply board in my 6000, where the 8000 specs 11 VDC. Other voltages appear to be the
Re: Korg DW-6000 supply voltages?
2010-06-19 by alexandrodeexu
Hi I ll see in my 6000 untill try to look into DW8000 schematics,it seems both 6000 & 8000 has the same basic constructions
Korg DW-6000 supply voltages?
2010-06-19 by gnw
Does anybody know what I should expect to see for voltages off the transformer and power supply board in one of these? I haven t been able to track down
RE: [vintagesynthrepair] Yamaha DX7II power supply schematics
2010-06-19 by Sven Braamkolk
Hi, You can look in the files of this group: http://launch.groups.yahoo.com/group/vintagesynthrepair/files/ There s a file called DX7II Power Supply PCB.zip
Yamaha
2010-06-18 by Roger J
Almost always it is cap failure. Usual the one in the loop back, typically 22 to 47uf. Check the others as they do age too. Or better yet, el shot gun. R
Yamaha DX7II power supply schematics
2010-06-18 by Nicolas
Hi everybody, I m looking for the schematics of the Yamaha DX7II power supply. It is different than the original DX7. Anybody knows where I could find it?
WTB: working or non-working Signal Generator boards (KLM64) for Korg ps3100/3200/3300.
2010-06-18 by Bakis Sirros
hi list, i will be receiving a Korg PS3100 that is missing its two Signal Generator boards (KLM 64) soon. so, i want to buy two Signal Generator boards, you
Re: Crumar Performer slider /cap sources?
2010-06-17 by alexandrodeexu
try this site http://www.elektronik-service.com.pl/index.php may be there are and try to look on ebay
Re: Crumar Performer slider /cap sources?
2010-06-16 by Alexis V. Rogers
Thanks, they were the first place I checked but Senso is out of stock.
Re: Crumar Performer slider /cap sources?
2010-06-16 by alexandrodeexu
Hi try to see on this site vintageplanet.nl
KORG TRIDENT plastic knobs with led
2010-06-16 by alexandrodeexu
Hi I m looking for plastic knobs with led for KORG TRIDENT Are they the same as used on ROLAND TR808
Who is moderating group?
2010-06-16 by narfman96
Hi, is the owner/moderator active? I would help moderate the group if needed. I have a dozen or so other groups I take care of. Fran
30 Days Free Trial Project Management Software
2010-06-16 by sarlinedesuzza
FREE TRAIL With http://www.project-drive.net Get it now!!!! For free account go to
Matrix-12 voice board ROM versions
2010-06-16 by synthparts
I just got a Matrix-12 with v1.4 voice board ROMs. I guess v1.6 was the latest. Does anyone know what changed in 1.6 from 1.4? Thanks, Doug
Become the Best Project Manager with Project Management Software
2010-06-15 by sarlinedesuzza
Collaborate With Your employees, manage your project team And Make your project a success. With Project Management Software .
Features of Project-drive.net
2010-06-15 by sarlinedesuzza
• Dashboard • Gantt Charts • Timesheet Module • User-friendly Interface • Project Management
Crumar Performer slider /cap sources?
2010-06-14 by Alexis V. Rogers
Anyone have a source for these? I need two slider caps and a 10k slide pot.
Re: [vintagesynthrepair] Re: DX7 Special Edition Eprom
2010-06-11 by Rish
You can get the DX7 special Eprom at www.route66studios.com Sent from my iPod
Re: DX7 Special Edition Eprom
2010-06-11 by synthasaurus
The stock/factory PROM that came with the DX7 should also have a sysex dump option. The patches can t be saved currently?
PerFX ROM's
2010-06-11 by Wayne Griffin
Oberheim left this bloody thing wide open, merely obscured by thin plastic film so... If you ever get one of these the ROM s are interchangeable, mine came as
Re: Limited patches on my K2000R
2010-06-10 by narfman96
It doesn t sound like anything is wrong with your K2000R. The CD could be loading patches with keymaps that your K2k doesn t have. To verify this press edit
Re: [vintagesynthrepair] CEM3335 for Kurzweil 250
2010-06-10 by brian walker
Hi http://www.vintageplanet.nl/ CEM3335 Dual VCA (exp. gain control)(31) NOS 37.82 45.00 Hope this helps Brian ... From: jfmcgrathmusicnet
Limited patches on my K2000R
2010-06-10 by brofjw
Hi all. I have a good condition Kurzweil K2000R I am looking to sell soon. It s such a great synth and I m a little blue to see it go. I also have an SCSI
CEM3335 for Kurzweil 250
2010-06-10 by jfmcgrathmusicnet
I have a Kurzweil 250 and haven t had any luck finding a replacement CEM3335 chip for it. Does anyone have one to sell or know of someone who does? Thanks,
RE: [vintagesynthrepair] Roland A30 help!
2010-06-10 by Brian
Try Roland - in the UK they can be located in South Wales, I ve always found them very helpful Regards Brian G3OYU From: vintagesynthrepair@yahoogroups.com
Roland A30 help!
2010-06-09 by adamivan2004
Hello everyone! Does anybody know where can I find CPU board for this controller,or replacement for IC s on this board? thanks in advance
Re: Roland SH101 envelop generator
2010-05-26 by duncan
... the only other thing I can think of is that there are some timing capacitors around the envelope generator that have changed their values with age. was the
RE: [vintagesynthrepair] Wurlitzer 200 amplifier noise quirks - filter cap/volume pot maddness
2010-05-26 by Brian
Hi I would like to help, but there seems to be some inconsistencies in your text. The drawing on page 28 is a PCB layout drawing and not a schematic; the
Wurlitzer 200 amplifier noise quirks - filter cap/volume pot maddness
2010-05-25 by earth2willi
Hi, Recently I ve been working on a couple of Wurlitzers, some that I own and another that belongs to a friend. The two units that I m currently working on
Re: Roland SH101 envelop generator
2010-05-21 by alexandrodeexu
Thanx,Dunkan all pots I replaced for the same value,I have circuit diagrams I tried to disconect Realeas pot ,the time of realise was about 10s
Re: Roland SH101 envelop generator
2010-05-21 by alexandrodeexu
Thanx,Brian But I have all circuit diagrams for SH101 and all pots i ve replaced are with right nominal ( 1MOhm for ADR ) we offered this set -