Vintage Synth Repair

hello, does anyone know of an off the shelf replacement for the pratt 
reed keyboard suitable for a sci pro-one? or perhaps some crafty mod to 
reduce the clicking? thanks jg.

>>hello, does anyone know of an off the shelf replacement for the
pratt reed keyboard suitable for a sci pro-one?<<

the one with the J-wires, right? & you're tired of cleaning yours too,
right? :-)

I have an old roland sh1000 which I bought for parts (a long story,
but it was recovered from a boat-wreck on miami beach). I'm going to
fit it's keyboard into my pro-1 as part of a big overhaul that will
involve also fitting a pin-matrix instead of those awful switches (&
thus a whole new panel will be needed) & possibly a little
step-sequencer. I will have to buffer the mod sources & beef up the
power supply too.

duncan/r.m.i.

--- In vintagesynthrepair@yahoogroups.com, "jgatdfg" <jgatdfg@...> wrote:
>
> hello, does anyone know of an off the shelf replacement for the pratt 
> reed keyboard suitable for a sci pro-one? or perhaps some crafty mod to 
> reduce the clicking? thanks jg.

Isn't the clicking usually caused by bad bushings?

HI,

I would like to know if anyone here on this list would be interested in 
buying a
4019 VCA submodule clone or clones of any other of the ARP 2600 sub modules 
?

Reason for asking is I am going to make one 4019 VCA for my ARP2600 and 
might
do a few more if anyone needs some. I might do a few of the others aswell as 
a backup
for my 2600.

E-mail me in private if you are interested in any submodules so I can get an 
idea
of how many to make.

_________________________________________________________________
Senaste nytt om Paris och Lindsey http://starlounge.msn.se/

Definately. 4027 and 4012 would be great...

--- In vintagesynthrepair@yahoogroups.com, "SynthX SynthX"
<synth_guru@...> wrote:
>
> HI,
> 
> I would like to know if anyone here on this list would be interested in 
> buying a
> 4019 VCA submodule clone or clones of any other of the ARP 2600 sub
modules 
> ?
> 
> Reason for asking is I am going to make one 4019 VCA for my ARP2600 and 
> might
> do a few more if anyone needs some. I might do a few of the others
aswell as 
> a backup
> for my 2600.
> 
> E-mail me in private if you are interested in any submodules so I
can get an 

> idea
> of how many to make.
> 
> _________________________________________________________________
> Senaste nytt om Paris och Lindsey http://starlounge.msn.se/
>

Hi

To save you reventing the wheel have you tried
synthrestore.co.uk he has several modules and was
working on several others last time I contacted him

Brian

--- SynthX SynthX <synth_guru@...> wrote:

> HI,
> 
> I would like to know if anyone here on this list
> would be interested in 
> buying a
> 4019 VCA submodule clone or clones of any other of
> the ARP 2600 sub modules 
> ?
> 
> Reason for asking is I am going to make one 4019 VCA
> for my ARP2600 and 
> might
> do a few more if anyone needs some. I might do a few
> of the others aswell as 
> a backup
> for my 2600.
> 
> E-mail me in private if you are interested in any
> submodules so I can get an 
> idea
> of how many to make.
> 
>
_________________________________________________________________
> Senaste nytt om Paris och Lindsey
> http://starlounge.msn.se/
> 
> 




 
____________________________________________________________________________________
Need Mail bonding?
Go to the Yahoo! Mail Q&A for great tips from Yahoo! Answers users.
http://answers.yahoo.com/dir/?link=list&sid=396546091

Hey,

Thanks for the info, no I have only tried to get hold of Phil Cirocco
which is easier said than done. I\ufffdll check it out. Thanks again.


>From: brian walker <brian1075us@...>
>Reply-To: vintagesynthrepair@yahoogroups.com
>To: vintagesynthrepair@yahoogroups.com
>Subject: Re: [vintagesynthrepair] ARP 2600 submodules
>Date: Fri, 16 Feb 2007 02:44:27 -0800 (PST)
>
>Hi
>
>To save you reventing the wheel have you tried
>synthrestore.co.uk he has several modules and was
>working on several others last time I contacted him
>
>Brian
>
>--- SynthX SynthX <synth_guru@...> wrote:
>
> > HI,
> >
> > I would like to know if anyone here on this list
> > would be interested in
> > buying a
> > 4019 VCA submodule clone or clones of any other of
> > the ARP 2600 sub modules
> > ?
> >
> > Reason for asking is I am going to make one 4019 VCA
> > for my ARP2600 and
> > might
> > do a few more if anyone needs some. I might do a few
> > of the others aswell as
> > a backup
> > for my 2600.
> >
> > E-mail me in private if you are interested in any
> > submodules so I can get an
> > idea
> > of how many to make.
> >
> >
>_________________________________________________________________
> > Senaste nytt om Paris och Lindsey
> > http://starlounge.msn.se/
> >
> >
>
>
>
>
>
>____________________________________________________________________________________
>Need Mail bonding?
>Go to the Yahoo! Mail Q&A for great tips from Yahoo! Answers users.
>http://answers.yahoo.com/dir/?link=list&sid=396546091

_________________________________________________________________
Uppt\ufffdck k\ufffdrleken p\ufffd MSN http://match.se.msn.com/