Re: [motm] 650 OS Update Status....
2008-06-18 by Robert van der Kamp
... I ve seen this too, recently. - Robert
Messages
Browse messages
Page 73 of 690 · 34488 messages matched
Re: [motm] 650 OS Update Status....
2008-06-18 by James Elliott
Here s the details of a bug that I turned in last year which causes my 650 to crash . Hopefully this gets addressed in the next update as it is frustrating to
Re: [motm] 650 OS Update Status....
2008-06-18 by Paul Schreiber
Hopefully Jeffrey will step in and give us an update. I have not heard from him in a while. Meanwhile: the majority of the issues are using external clock to
650 OS Update Status....
2008-06-18 by James Elliott
Paul, I know you are busy working on the 730 & cloud generator and you have been providing regular updates regarding them (thank you), however we haven t heard
FS: MOTM format CGS bandpass filterbank $200
2008-06-17 by Jason Proctor
selling my MOTM format 4-band CGS bandpass filterbank. it s basically 4 of these - http://cgs.synth.net/modules/cgs30_bpf.html in a 2U module, behind a nice
Re: [AH] Dimen sion D ?
2008-06-17 by Norman Fay
I m not sure if I already answered this? I don t think I did. I m interested for sure, put me down for 2 please.
Re: [motm] Re: MOTM-730 illustration
2008-06-16 by Paul Schreiber
... No. The knobs & pots are from the MOTM Frac panels. The knobs use a 18-tooth knurl press-on collet. Paul S.
Re: MOTM-730 illustration
2008-06-16 by wjhall11
Paul - A stupid cosmetic question - The 730 illustration seems to use non- standard size knobs. Is this a quirk of the illustration? Bill and Will ... and
SKB 12 U pop up case for sale
2008-06-15 by jan961
i have a SKB 12 U pop up case for sale $145.00 buyer to pay shipping cost contact me jan961@mac.com if interested paypal ok
Re: [motm] OP285 in DIP?
2008-06-15 by John Mahoney
... With so many op amps available, I need to ask (honestly, not sarcastically): What s so special about the OP285? Is there no good substitute? John -- No
Status of Stooge Panels
2008-06-15 by Greg James
Does anybody know what the status of Stooge Panels is? I m building a pent-up list of panels I want/need... Ps: I already know about Bridechamber (Scott does
RE: [motm] OP285 in DIP?
2008-06-14 by JAMES GALLANT
You may be stuck using an soic-8. The DIP package went obsolete in April 2002. JVG
Re: [motm] MOTM-730 illustration
2008-06-14 by Paul Schreiber
It only does 2 things: a) you put in a waveform and it squares it up, then outputs a 0 to +5V square waves that are a division of the input. Input 1000Hz, the
OP285 in DIP?
2008-06-14 by clickmrmike
Anybody know a source for the OP285GP in PDIP? After searching the usual suspects, only DigiKey as them at all, and only in SOIC. Thanks, mrmike
Re: [motm] MOTM-730 illustration
2008-06-14 by Jeff Laity
I m looking forward to the video that illustrates what the heck this thing does. (I sorta get it, mostly.)
Re: [motm] MOTM-730 illustration
2008-06-14 by Paul Schreiber
... The STEPPED output is an 8-level rising sawtooth (starting at 0V and going positive). The 4/O/5 switch is the step size. It is not calibrated, but close
CGS Tube VCA in MOTM format
2008-06-14 by Mark
I recently built a CGS65 tube VCA in MOTM format using a panel and bracket from Bridechamber. The version I built was heavily modified from the original in
Re: [motm] MOTM-730 illustration
2008-06-14 by Mark
... I probably missed an earlier post, so sorry if this was covered this already, but what does the interval switch (4th, 5th, octave) do??
MOTM-730 illustration
2008-06-14 by Paul Schreiber
Here is an illustration of what the front panel of the MOTM-730 VC Pulse Divider will look like. www.synthtech.com/pix/m730_illus.jpg Thanks to Ken Tkacs for
Re: [motm] sorry - didn't mean to send that to the list.
2008-06-13 by mcb, inc.
Well, if anyone on the list ever asks how to get in touch with Gene... -- Monty Brandenberg
sorry - didn't mean to send that to the list.
2008-06-13 by Gene Schwartz
my order/address
2008-06-13 by Gene Schwartz
While I m sure I mentioned this at the time, the address listed in my paypal receipt is my home address - my order should be shipped to my work address. Gene
Got all the credit card numbers
2008-06-12 by Paul Schreiber
No need to send any more credit card numbers, I was able to recover all but 1 and so back to other issues :) Paul S.
Re: Video and Picture
2008-06-11 by cormallen
Definitely not James Blunt. H ... Blunt. ... him live ... useless synth ... about ... free ... with 1 ... youtube
Re: [motm] Video and Picture
2008-06-11 by synchro1
I don t know if that is Beck or Blunt but I can say the head just to the right of it (and obscured but for the bald spot) belongs to Dieter Doepfer. I was
If your order # is 948 to 982, please read!!
2008-06-11 by Paul Schreiber
If your pending order number is between 948 and 983 AND you paid by credit card, please email me: a) your order number b) the *middle* 8 digits (7 if AMEX) of
[motm] Video and Picture
2008-06-11 by Kenneth Elhardt
Okay, the guy behind the MOTM synth? My guesses are Beck or James Blunt. http://www.flickr.com/photos/fr1zz/96435199/sizes/o/ Ran across the following video
Most CEMs no longer for sale
2008-06-11 by Paul Schreiber
The selling agreement between myself and the estate of Doug Curtis/OnChip Systems is no longer in effect. I have removed all of the ICs that were covered under
Bridechamber mounting screws with MOTM rails?
2008-06-10 by ilanode
Does anyone knows wether the Black Rail-Mounting Screws sold by Bridchamber will fit into the MOTM mounting rails? TIA, Ingo
Re: [motm] Making power cables
2008-06-10 by Jeff Laity
The AMP tool would have taken, like, days to get here, so I came up with my own system that worked pretty well: 1. Put 18 ga. wire in slot and push it down a
Re: [motm] Re: Making power cables
2008-06-09 by Richard Brewster
I m with Dave on this. The solder-less approach, while correct , is better suited to a mass production assembly line that warrants purchase of the expensive
Making power cables
2008-06-09 by Paul Schreiber
(resending, having some email issues) a) first you need the correct wire: http://stevenengineering.com/tech_support/PDFs/37PCBMTACN.pdf which for 18ga. is UL
M-730 render?
2008-06-09 by Paul Schreiber
If someone wants to assist in making a render/mock-up of the MOTM-730 VC Divider panel, contact me off-list. Paul S.
TEST
2008-06-09 by Paul Schreiber
Sorry, having all sorts of email issues today..... Paul S.
Re: [motm] Making power cables
2008-06-09 by John Blacet
The Blacet web site has two power cable kits that provide everything you need for 4 pin cables although you will have to supply 6 pin connectors for the larger
Re: [motm] Making power cables
2008-06-09 by Mark
... Using the right gauge wire is important. What I do is take unstripped wire, then using a needle-nose pliers with the jaws open just a little bit, with one
Re: [motm] Making power cables
2008-06-09 by krisp
I ve got one of the fancy amp trigger type guns with heads for the 156 and the 100 connectors it was not cheep but after I sent a screw driver through my hand
RE: [motm] Making power cables
2008-06-09 by JAMES GALLANT
I just buy these things: http://www.allelectronics.com/make-a-store/item/CON-234/4-PIN-CONNECTOR-W/HEADER-.156/-/1.html James
Re: Making power cables
2008-06-09 by djbrow54
I ground a screwdriver so I can press them in. I don t trust them, so I put the connector sideways (to avoid gravity) in a vice and solder the wires. You
Re: [motm] Making power cables
2008-06-09 by Scott Deyo
There are two styles -- crimped pin, and press-in. I use the crimping tool and pins for mine. When I goof and order those press-in bastards (excuse me!), I
Re: [motm] Making power cables
2008-06-09 by Scott Juskiw
You can get some tools for fixing wires into MTA connectors (Mouser part numbers): 571-598041 156 T HANDL MAINT TL AMP MTA .156 Connectors 571-598031 100 T
Making power cables
2008-06-09 by Jeff Laity
What is the secret to making a MOTM power cable with the MTA-156 connectors? Do I need a crimper to attach the wires? I try to get them in there with a set of
Re: [motm] Elhardt gets his wish - and Acoustic Piano Tones
2008-06-07 by Kenneth Elhardt
... Behringer list think of it?
fs: motm-420 filter
2008-06-07 by loopcycle
...in excellent cosmetic condition and working perfectly. http://www.angelzero.com/content/images/420-002e.jpg $275 + shipping. im in the US. let me know if
Re: [motm] CG/CGX update
2008-06-07 by Ti_
... Perfect! Now I know what this years birthday present to myself will be:) ~Tim
CG/CGX update
2008-06-07 by Paul Schreiber
The reason I went ahead and brought out the MOTM-730 ahead of the CG/CGX has to do with the CAD system upgrade I did about 2 years ago. I use OrCAD schematic
Re: [motm] FS: MOTM-420, Expressionist
2008-06-06 by Jeff Laity
Mine! Can t wait. ... NOTICE: This electronic mail message and its contents, including any attachments hereto (collectively, this e-mail ), is hereby
Re: [motm] Initial testing of MOTM-730 VC Divider
2008-06-06 by thomas white
Cool Paul! Any word on the CG module? What is the current place and status of that project so far? Haven t seen an update on it in a while (unless I missed
VP330 Vocoder Plus: Male 8 filter
2008-06-06 by JH.
Hi, as this is one filter I want to include into my Famous Fixed Filters ( FFF ) PCB project, I made a short demo with the clone I built some years ago.
Initial testing of MOTM-730 VC Divider
2008-06-06 by Paul Schreiber
I have finished my initial testing of the production-ready (almost, see below) pc board set for the MOTM-730 VC Pulse Divider. The board set consists of: a)