https://www.sweetwater.com/insync/active-sensing/
Charles
--------------------------------------------
On Tue, 9/5/17, charles chop charleschop@yahoo.ca [korgpolyex] <korgpolyex@yahoogroups.com> wrote:
Subject: Re: [korgpolyex] Re: Random Pitchbend Sound & Midi Events from EX800 (with Hawk & MoogSlayer Mods)
To: korgpolyex@yahoogroups.com
Received: Tuesday, September 5, 2017, 5:48 PM
active sencing ..google it ,,, but to my
understanding is a pulse...sent every 20ms or so
sent from some decives...
its a means of preparation for communication between
sequencers and synths ....
status byte 254 if im not mistaken
if some devices don't receive this byte they sit dormant
and initiate a "open for communication state"
but im not entirely sure ....im just a hack but do love
midi protocol ..have studied it over the past 15 years
....
I did notice u had a lot in your rig ,,,,ever try just
hooking the korg into a sequencer seeing what happens
when u use a control change via the sequencer?
charles
--------------------------------------------
On Mon, 9/4/17,
4nm6kadee7zdzsxm65oyvgpeyokmlg7czf2bnuoi@...
[korgpolyex] <korgpolyex@yahoogroups.com> wrote:
Subject: Re: [korgpolyex] Re: Random Pitchbend Sound &
Midi Events from EX800 (with Hawk & MoogSlayer Mods)
To: korgpolyex@yahoogroups.com
Received: Monday, September 4, 2017, 8:17 PM
Hi Charles, thanks for your reply!
The bend-timing seems rather random to me.
Other than that i'm not sure what you mean with
"active sensing".
But i had to re-install the firmware a few times
already,
(as the Hawk-Max4Live-device seems to send a ping of
death
sometimes...) and this problem always consisted. :-/
#yiv7644200542 #yiv7644200542 --Message
Re: [korgpolyex] Re: Random Pitchbend Sound & Midi Events from EX800 (with Hawk & MoogSlayer Mods)
2017-09-05 by charles chop