Re: Korg Ex800 Buttons replacement
2014-08-26 by groof_f@...
Im looking for the switches...maybe a regular push button but with a larger pusher
Messages
Browse messages
Page 22 of 141 · 7050 messages matched
Re: [korgpolyex] Re: Patches don't sound right in version 2.58
2014-08-21 by F Aitken
Forgot to mention that mine is a hawk+atomahawk ed EX800. On Thursday, August 21, 2014 2:30 PM, bperkins211@gmail.com [korgpolyex]
Re: Patches don't sound right in version 2.58
2014-08-21 by bperkins211@...
my joystick will glitch and make the vcf depth activate slightly.I think the dual/split pot has a bad spot in the carbon traces, or other mechanical issue. I
Re: Patches don't sound right in version 2.58
2014-08-21 by mfaitkenjr@...
Let me say again for clarity that the patches under 2.58 are being modulated by an LFO or another function, which wasn t the case before.
Patches don't sound right in version 2.58
2014-08-21 by mfaitkenjr@...
Hi, I just updated to boot version 1.98, software version 2.58. The update seems successful after doing the press bank/hold on startup or something to that
Re: [korgpolyex] Max for Live : Poly 800 II / EX-800
2014-08-21 by ultragalore@...
Didn t know you sold the knobs too. I thought I d 3D-design my own I could extend the design to make it fit into a PS controller.
Re: [korgpolyex] Max for Live : Poly 800 II / EX-800
2014-08-21 by ultragalore@...
Yes you can - The know is still in beta though because I might do some tweaking on the markings. I ordered my own in black detail plastic but it looked quite
Re: Max for Live : Poly 800 II / EX-800
2014-08-21 by bperkins211@...
If you hadnt seen it, you might want to try this editor.Download, unzip and check the README doc. HAWK800-GUIv2.29.zip - Google Drive
Re: [korgpolyex] Max for Live : Poly 800 II / EX-800
2014-08-21 by Michael Hawkins
Yes, I sold out of the knobs and the paypal button is no longer on the HAWK800 web site - at least a year ago. But I created a brand new joystick PCB that
Re: [korgpolyex] Max for Live : Poly 800 II / EX-800
2014-08-20 by lists@...
Great thanks Mike. Just enough time to finish my Bass Station II editor and then I ll get cracking on the Hawk.
Re: [korgpolyex] Max for Live : Poly 800 II / EX-800
2014-08-20 by <backshall1@...>
Does this mean Mike is sold out of the repro knobs on the Hawk 800 site? Don B. From: mailto:korgpolyex@yahoogroups.com Sent: Wednesday, August 20, 2014 4:11
Re: [korgpolyex] Max for Live : Poly 800 II / EX-800
2014-08-20 by John David Duncan
I d like one of those knobs! Can I order one from shapeways? JD
Re: [korgpolyex] Max for Live : Poly 800 II / EX-800
2014-08-20 by Michael Hawkins
Yes, I will be shipping out kits this week. When you say you rebuilt the joystick. What did you use for the joystick pot assembly? I have developed a new PCB
Re: [korgpolyex] Max for Live : Poly 800 II / EX-800
2014-08-20 by ultragalore@...
Say Mike, does this mean the HAWK-kits are on their ways soon? By the way - I ve made a 3D joystick knob replacement model for my Poly800 and have installed
Re: [korgpolyex] Max for Live : Poly 800 II / EX-800
2014-08-19 by Michael Hawkins
Joe, your kit will be in the mail this week. Mike On Sunday, August 3, 2014 5:19 PM, lists@joemattiello.com [korgpolyex] wrote:
Re: Korg Ex800 Buttons replacement
2014-08-15 by groof_f@...
Im from Spain (Barcelona) How much for the buttons and the buttons board? groof_f@hotmail.com
Re: Korg Ex800 Buttons replacement
2014-08-15 by John Boys
i have a parts ex-800 for sale txt 734 5O6 8l5l john
Re: [korgpolyex] Korg Ex800 Buttons replacement
2014-08-15 by Charles Patten
Personally, I am just looking for the button caps. I can reach into the guts of the exposed EX and tap the actual switches to change parameters, etc., but I
Re: [korgpolyex] Korg Ex800 Buttons replacement
2014-08-15 by <backshall1@...>
If someone has the entire EX-800 service manual including the parts list, it should be easy to find. Too bad the service manual in the files section of this
Re: [korgpolyex] Korg Ex800 Buttons replacement
2014-08-15 by Charles Patten
Oh man, I have this question too. My EX-800 is missing all but one of the push buttons. From what I understand, replacement buttons are essentially impossible
Korg Ex800 Buttons replacement
2014-08-14 by groof_f@...
I want to replace all the buttons on my Ex800. What type is the correct?
Re: [korgpolyex] Data Dial INSTALLED and WORKING!
2014-08-11 by electrohead2000@yahoo.com
That is a awesome. Nice work!!! Lucifer Sent from my MetroPCS 4G Linux device ------ Original message------ From: bperkins211@gmail.com [korgpolyex] Date: Sun,
Data Dial INSTALLED and WORKING!
2014-08-10 by bperkins211@...
Finally! I managed to find a pulse switch and simply installed it in to create a Data Dial. It wont change the numbers very fast, but it does work when turned
ROM version Poly 800 830236
2014-08-07 by Ultra Galore
Not sure why with al these nice upgrades around, but anyone who wants to upgrade their stock Poly 800 8K ROM with the 236 version can download the image here,
Max for Live : Poly 800 II / EX-800
2014-08-03 by lists@...
Hello, I made a basic Max for Live patch to control program change and the DCO/VCF mod parameters. I think it s kind of not well known that these can actually
Re: Installing A CR2032 battery
2014-07-22 by him@...
Hi Don, thanks for your quick and detailed response. The serial number on the bottom of the synth is : 012927 and board number is KLM-596-2. It has no solder
Re: [korgpolyex] Installing A CR2032 battery
2014-07-22 by <backshall1@...>
By “early” I assume you mean one that does not have the solder pads between IC18 and IC19 where they would eventually put the battery at the factory. I’m
Installing A CR2032 battery
2014-07-22 by him@...
Hello All, I ve just bought an early Poly-800 with a few faults that I ve fixed ( non working key, broken joystick and unresponsive buttons ) the last job is
For the Reaper Users
2014-07-22 by snugglepussyisme@...
I ve created a Reabank file for selecting banks and patches from the Hawk800 using Reaper s ReaControlMIDI plug-in. All the native Reaper plug-ins are free, so
PCG Tools Poll
2014-06-19 by michelkeijzers@...
Dear users, As you might know I am the developer of PCG Tools, see: http://pcgtools.mkspace.nl http://pcgtools.mkspace.nl/ PCG Tools is a librarian/analyzer
Re: [korgpolyex] Re: Poly 800 data knob schematics
2014-06-10 by bperkins211@...
Sorry, I have not gotten around to it. Really all I needed to do was change the debounce circuit. It needs to look like this (Figure 2) on each side of the
Re: [korgpolyex] Re: Poly 800 data knob schematics
2014-06-10 by neosay@...
@bimmerfan222 Hi! It s me again - did you had the chance to do the update for the data knob schematics. I have checked the the files section serveral time...
EX-800 "twisted" Moog slayer mod (done!)
2014-06-08 by Sami Jumppanen
Hi all, I just finally completed my modified Moog slayer mod . I could say I did it halfway, and even twisted that half. No resonance potentiometer, NO holes
RE: [korgpolyex] Re: About the NJM2069 Chip
2014-06-04 by ackolonges
Yes that is the page where one person says Pin 12 Vee is also -5 volts in the DSS-1 Pin 22 Vcc is actually +12 volts in the DSS-1 and another person posts a
Re: [korgpolyex] Re: About the NJM2069 Chip
2014-06-04 by Martin Ator
http://www.amsynths.co.uk/Filter_Bank/AM8069/am8069.html used to sell a circuit board (or considered selling) for DIY but he s recently updated all
Re: [korgpolyex] Re: About the NJM2069 Chip
2014-06-04 by Harlan Foster
Here is some decent info about the NJM2069. Not a datasheet, but better than nothing! http://sounddoctorin.com/synthtec/korg/njm2069.htm On Tue, Jun 3, 2014 at
Re: [korgpolyex] Re: About the NJM2069 Chip
2014-06-04 by Michael Hawkins
No one has the spec for the chip. So there s no datasheet to go to unfortunately. I pestered Korg for months. They tried very hard to find the details of it.
RE: [korgpolyex] Re: About the NJM2069 Chip
2014-06-04 by ackolonges
Thanks for your feedback everybody. The values of the capacitors are written in the DW8000 schematics as 0.001 with no units, so I suppose the filter
Re: About the NJM2069 Chip
2014-06-03 by bperkins211@...
yes he did. I also have had long discussion with Paul about the DW8000 filter board and he said when it came to using a NJM2069 in his synth, he just copied
Re: About the NJM2069 Chip
2014-06-03 by josh.nursing@...
Paul Maddox of Vacoloco has built a standalone synth with the chip.
Re: About the NJM2069 Chip
2014-06-03 by bperkins211@...
you can find a block diagram of the IC chip inside the Korg Poly 800 service manual. It is best to check the schematics inside a Poly 800, or DW 8000 to find a
Re: [korgpolyex] Re: UnKnown Mod
2014-06-02 by Michael Hawkins
You will need to take photos of the back of the main board and see where the plug is patched in. Who knows, there might even be a board squeezed in under the
Re: UnKnown Mod
2014-06-02 by justmull@...
Photos uploaded to the photostream - couldn t seem to attach
Re: [korgpolyex] UnKnown Mod
2014-06-02 by Michael Hawkins
Don t see any photos attached. On Monday, June 2, 2014 8:54 AM, justmull@gmail.com [korgpolyex] wrote: Hey all I have what
Re: About the NJM2069 Chip
2014-06-02 by korgpolyex800@...
In the Poly, the NJM2069 takes a +5,0,-5 volt supply.
Re: About the NJM2069 Chip
2014-06-02 by korgpolyex800@...
http://sounddoctorin.com/synthtec/korg/njm2069.htm http://sounddoctorin.com/synthtec/korg/njm2069.htm There was a block diagram somewhere but I just don t seem
UnKnown Mod
2014-06-02 by justmull@...
Hey all I have what appears to be some sort of mod to my newly acquired poly 800. It s a 5 pin male din socket on the back that disappears under the main board
About the NJM2069 Chip
2014-06-02 by ackolonges
Hi All, I ve been searching high and low for schematics and other information about using the filter/VCA chip in a standalone module but still have a few
Re: be quick and grab a cheap ex800 boxed as new
2014-05-31 by domgoold@...
sorry i misread that what was i thinking of. at least you know i d do it if it was for real.
Re: [korgpolyex] be quick and grab a cheap ex800 boxed as new
2014-05-31 by no freq
Actually, the guy wants to BUY an ex800... Le 31 mai 2014 19:45, domgoold@yahoo.com [korgpolyex]