Re: [korgpolyex] Preliminary HAWK800 editor demo
2014-10-08 by ultragalore@...
I noticed that on the scaling - it took a bit getting used to, but I imagine the scaling you made is a handy feature when you want to make a template for midi
Messages
Browse messages
Page 21 of 141 · 7050 messages matched
Re: [korgpolyex] Preliminary HAWK800 editor demo
2014-10-08 by Michael Hawkins
By the way, I have a feature request out that is going to allow an absolute value mode for CC parameter changes so that you can send a real value rather than
Re: [korgpolyex] Preliminary HAWK800 editor demo
2014-10-08 by Michael Hawkins
This looks great but I am having trouble getting Jazz-Soft working on my Fedora 18/Firefox machine. I copied the .so to /usr/lib/mozilla/plugins. Set perm s to
Re: [korgpolyex] Re: HAWK software update - 2.59a - now available
2014-10-08 by ultragalore@...
I ll check it out - I now started working on my own editor which works from a webpage, I shared the link and description in another post
Preliminary HAWK800 editor demo
2014-10-08 by ultragalore@...
Hi all, After building my HAWK800 yesterday I noticed editing the HAWK Poly800 parameters is quite a task now so I started developing a browser based editor
Re: [korgpolyex] Re: HAWK software update - 2.59a - now available
2014-10-08 by Michael Hawkins
If you look in the templates folder in the files section of the source forge HAWK800 project you will see a Novation SL 25 template already made by me.If you
Re: [korgpolyex] Re: HAWK software update - 2.59a - now available
2014-10-08 by ultragalore@...
Thanks, I followed the guide you sent earlier to swap roms and flashed a good one. This fixed everything. Boot time of the hawk800 is a lot better now. Bt yhe
Re: [korgpolyex] Re: HAWK software update - 2.59a - now available
2014-10-07 by Michael Hawkins
to display the boot version. Power up Poly while holding down the bank hold button. Keeping holding it down and HAWK with show boot version and software
Re: HAWK software update - 2.59a - now available
2014-10-07 by ultragalore@...
that s quick - I ll update it anyway - see if my error 3 also changes. I have boot 1.98 if I recall correctly. Just gettin used to the HAWK setup so, not sure
Re: [korgpolyex] HAWK software update - 2.59a - now available
2014-10-07 by Michael Hawkins
I forgot to provide a link for the software. Here it is: hawk800 hawk800 Welcome to the development pages for the HAWK-800. The HAWK-800 is a hardware/software
HAWK software update - 2.59a - now available
2014-10-07 by Michael Hawkins
Most HAWK owners probably won t want to upgrade to version 2.59a becuse this software update is for the BOOT ROM only and only changes one small behavior in
Re: [korgpolyex] error 3 on HAWK800 boot?
2014-10-07 by Michael Hawkins
On page 42 of the owners manual it states that Error 3 is caused when the boot ROM checksum does not match. This is very rare and very odd. But it looks like
error 3 on HAWK800 boot?
2014-10-07 by ultragalore@...
Not sure why this is happening. The manual says I m dumping the wrong filetype in the hawk, but it happens on boot, I m not sending any messages to it. When I
Re: [korgpolyex] Re: Joystick won't bend
2014-10-07 by Michael Hawkins
Yes, that is a very good point. I shall update the software and will post it on sourceforge within a week. /Mike On Tuesday, October 7, 2014 9:06 AM,
Re: Joystick won't bend
2014-10-07 by ultragalore@...
I ve also uploaded a standard ex800 patch to default my newly adapted (jay!) hawk800 but it seems pitch data on P2 defaults to zero if these parameters are not
Re: [korgpolyex] R96 on Poly800 MK1 value/type?
2014-10-07 by ultragalore@...
Yes, I found it already, thanks - did not notice that the online Poly 800 service manual jpg had a hi-res PDF behind it! (Which was a lot easier to read)
Re: [korgpolyex] R96 on Poly800 MK1 value/type?
2014-10-07 by Martin Ator
Is R96 the tape output resistor? On Tuesday, 7 October 2014, 9:50, ultragalore@yahoo.com [korgpolyex] wrote: While
Re: [korgpolyex] Bell sounds?
2014-10-06 by Michael Hawkins
As has been explained many times on this forum. The tone generator in the Poly-800 is the MSM5232 chip that has two banks of four oscillators. Each bank of
Re: [korgpolyex] Bell sounds?
2014-10-06 by Daniel Forró
How to get inharmonic clangorous spectra: - with additive synthesis - use more oscillators, preferably with square waveform, and tune them (and detune) to get
Bell sounds?
2014-10-06 by tim.tashpulatov@...
Hi, I was wondering if there is a way to create some kind of decent bell sound with only 2 DCO we have in Poly 800. I ran across some papers telling one d need
Re: [korgpolyex] Joystick won't bend
2014-10-01 by tim.tashpulatov@...
Thanks, I feel like being completely dumb :) I did press WRITE button, but ignored flashing -- thinking it would save into the same location, just like my
Re: [korgpolyex] Joystick won't bend
2014-10-01 by bperkins211@...
to save patch settings, press WRITE and then enter the patch number you want it stored at.. to save it in the same location, just re enter that number. i
Re: [korgpolyex] Joystick won't bend
2014-10-01 by tim.tashpulatov@...
Mike, Thanks a lot, it was indeed P2 85 set to zero. As soon as I set it to full bend everything started to work :) I only have to recall how do I save changes
Re: [korgpolyex] Joystick won't bend
2014-09-30 by Michael Hawkins
Tim, If you have the HAWK installed you will need to make sure that the bend parameter P2 85 is set high. Maximum bend depth is 63. No bend = 0. /Mike On
Re: [korgpolyex] Joystick won't bend
2014-09-29 by Malte Rogacki
Hi; if I recall correctly KLM601 or KLM601a are responsible for setting the bend range in either direction. If there s a failure on this board one bend
Re: [korgpolyex] Joystick won't bend
2014-09-29 by Martin Ator
Yep, probably the slider. See if you can clean it but be careful. The paint or lacquer that they put on the poly800 can come off so try not to get anything on
Joystick won't bend
2014-09-29 by tim.tashpulatov@...
Hi all, Smee again. Now my Poly 800 won t bend with joystick. Vibrato and VCF however work, it is only bends to the left and to the right that do not work. I
bad spam titled 'michael hawkins' beware!
2014-09-25 by domgoold@...
if you haven t got it yet, there s a spam email from michael hawkins , so don t click the link, just delete it.
Re: Poly 800 seems to works, no sound or strange sounds at very low volume
2014-09-22 by lushox@...
I will try with the some other PSU and let you know if this is the solution to the problem. Has the poly 800 reversed keys edition the internal battery or not?
Re: [korgpolyex] Poly 800 seems to works, no sound or strange sounds at very low volume
2014-09-21 by gordon@...
... The first bit sounds like it s the power supply. Either your batteries or flat or the PSU isn t up to the job. You need 9V at *at least* 1A for it to
Poly 800 seems to works, no sound or strange sounds at very low volume
2014-09-21 by lushox@...
I have purchased 2nd hand a Poly 800 reversed keys edition and it was working couple of times. Today sudenly when powering the unit the display was flickering.
Re: [korgpolyex] Re: Sequencer won't run
2014-09-16 by Michael Hawkins
Yes, SLFO3/4 are the same as LFO3/4. I shall check to make sure that the LFO s are all labelled the same in the documentation. /Mike On Monday, September 15,
Re: [korgpolyex] Re: Sequencer won't run
2014-09-15 by tim.tashpulatov@...
Mike, thanks for the tip. My sequencer now works just fine. When you have the time to update the docs, could you please check if SLFO3 and SLFO4 are the same
Re: [korgpolyex] Re: Sequencer won't run
2014-09-15 by Michael Hawkins
The sequencer enable switch still operates the same as the original. The tape switch is not documented very well. I shall fix that. Mike On Monday, September
Re: Sequencer won't run
2014-09-15 by tim.tashpulatov@...
Thanks Mike, I will check the switch. Is there a place in documentation mentioning the switch (and probably other switches too? I have fiddled with them and
Re: [korgpolyex] Sequencer won't run
2014-09-14 by Michael Hawkins
Check the sequencer enable/disable switch on the back. It should be set to disable. Mike On Sunday, September 14, 2014 6:33 AM, tim.tashpulatov@gmail.com
Sequencer won't run
2014-09-14 by tim.tashpulatov@...
Hello fellows, I have Hawk800 with software 2.55. I know version 2.59 is out for a while but haven t tried it yet. There seems to be a problem with advanced
Re: Custom MIDI controlled NJM2069 Project
2014-09-14 by ultragalore@...
I understand you want to use the stuff you have lying around but I thought I d just send you this board because its a small, fast, cheap and easy to develop
Re: Custom MIDI controlled NJM2069 Project
2014-09-13 by bperkins211@...
thanks for the comments ultragalore, I was actually planning to use the MIDI board I linked to in my OP since I already have 3 of them... MPA: MIDI Decoder
Re: Custom MIDI controlled NJM2069 Project
2014-09-13 by ultragalore@...
I have succesfully used a Teensy to process midi messages. This might be a board you would like to check out. It s in fact a small Arduino with USB. Cool thing
Custom MIDI controlled NJM2069 Project
2014-09-13 by bperkins211@...
Hello all, I could use advice/help in recreating a NJM2069 VCF/VCA circuit. I am going to use the DW8000 service manual as a reference, since I have one of the
Re: [korgpolyex] Re: Patches don't sound right in version 2.58
2014-09-10 by Michael Hawkins
I would check that your global parameters are all set correctly. Mike On Sunday, August 31, 2014 11:07 AM, Michael Hawkins korgpolyex800@yahoo.com
New HAWK software available
2014-08-31 by Michael Hawkins
The new version is 2.59 and you can get it here hawk800 It includes the ability to start SLFO4 at any phase. This complements the same phase setting ability
Re: [korgpolyex] Re: Patches don't sound right in version 2.58
2014-08-31 by Michael Hawkins
I shall check into this. I had someone else experience the same problem and I had a terrible time trying to nail it down. It might be the patches being
Re: [korgpolyex] Re: Korg Ex800 Buttons replacement
2014-08-29 by bperkins211@...
I m certain you cannot order those. They were made only for the EX500.. about 30 years ago. You will need to either find replacements from a parted out unit
Re: [korgpolyex] Re: Korg Ex800 Buttons replacement
2014-08-29 by charles.patten79@...
This is my predicament w/r/t the EX-800 buttons/switches. All my switches on the board are working and attached. See: I m sure some of you guys have run into a
Re: [korgpolyex] Re: Korg Ex800 Buttons replacement
2014-08-28 by Eanna Butler
Always puzzled me that there doesn t appear to be any drop-in replacement available for what seems like relatively basic switches...? Or am I wrong? On 29 Aug
Re: Korg Ex800 Buttons replacement
2014-08-28 by groof_f@...
I dont know i think they are drop in
Re: Korg Ex800 Buttons replacement
2014-08-27 by gyaker@...
Are these buttons drop-in or do you have to modify them?
Re: Korg Ex800 Buttons replacement
2014-08-26 by groof_f@...
Pulsador C/I 1 circuito 6x6mm longitud del pulsador 6mm Arduino, Electronica y Robotica Electan, Tienda On Line