Re: EML 200 Modular fun on YouTube
2008-03-09 by synergeezer
Hello Tim, What coincidences! For years, I ve had an Atari site bookmarked, run by a Tim Conrardy, which I check periodically. Recently, I printed out the
Messages
Browse messages
Page 6 of 14 · 679 messages matched
EML 200 Modular fun on YouTube
2008-03-08 by timothyconrardy
Someone caught me at the Analouge Heaven meeting last year(in Oakland, CA, USA)and put up these video s on You Tube.
New member and EML 200
2008-03-08 by timothyconrardy
Hi Guys I was really glad to find this grp! Here is my EML story: When I was going to Hi school in McLean, Virginia, I started getting into electronic music,
Re: EML 100
2008-02-10 by synergeezer
Laurie Spiegel has a site: http://www.retiary.org/ls/ where you can hear some EML 100 and 200. Look under Obsolete Systems (I think she means it
RE: [emlsynth] EML 100
2008-02-07 by sasha
Thanks for the info, Steve. I measured the voltage with a multimeter and all looked ok at the PSU. I was able to detect voltage even on that cap that appeared
RE: [emlsynth] EML 100
2008-02-06 by Steve Ridley
... Probably the power supply, but not necesarily the caps. (It s fashionable at the moment to blame the caps whenever anything dies, but they don t fail dead
RE: [emlsynth] EML 100
2008-02-06 by sasha
I took some additional pics and posted to the same album. Looks like there is at least 1 leaky cap. Take a look at this photo:
RE: [emlsynth] EML 100
2008-02-06 by sasha
Hi David, Thanks so much for your reply. I have tried plugging into all the outputs and get absolutely no sound. Do you think it s likely that the capacitors
Re: [emlsynth] EML 100
2008-02-06 by David Cornutt
... A no-sound-at-all problem may be something simple. Have you tried plugging directly into the VCO outputs? If none of them are working, the problem is
EML 100
2008-02-03 by Sasha Kipervarg
Hello, I was lucky enough to be handed a free EML 100 the other day. It powers up, but I get no sound. Can someone recommend a good repair shop in the Bay Area
RE: [emlsynth] EML OSC 1 issue
2007-11-19 by Steve Ridley
There are clearer schematics and service manual here: http://manuals.fdiskc.com/tree/EML/ There doesn t seem to be an Osc. 1 circuit, but parts of osc. 2 & 3
EML OSC 1 issue
2007-11-18 by Heath Finnie
I posted here a little while ago about this, but I have since figured out more of what it s doing wrong. Long story short is that the Saw, Negative Saw and
Re: [emlsynth] EML101 - delayed vibrato ?
2007-10-28 by bill bigrig
Howdy, I have an EML 500. It s filter will not resonate either. I believe they are 2 pole 12db per octave filters. I think maybe EML made them non-resonating
EML101 - delayed vibrato ?
2007-10-28 by robert andrew scott
Hello! I have a few things I ve been wondering- Does anyone know a way to patch an Env to Osc.1 and get a delayed vibrato on the EML101 ? Are the filters not
amateur fun? pro's post your patches
2007-10-12 by k636akx
some EML patch points seem conveniently numbered, i suppose for educational use. e.g. there are some experiments in the EML 200 manual using these numbers. i
replacement slider caps
2007-10-09 by k636akx
don t suppose anyone has any spare black or blue slider caps for 400/401 they could sell me please?
Re: EML 400 User Manual
2007-10-08 by mike_b_eml
... The 7MB PDF of the manual is now in our EMLsynth group file archive. I posted it in 2 parts because Yahoo limits file sizes to about 5MB. We are allowed
Re: EML-400 Auto-Set feature
2007-10-05 by k636akx
thanks again mini and george i had the eml as master clocking an sbx 80 into my midi/sync gear so i could permutate the sequences within a track, as the manual
re: EML-400 Auto-Set feature
2007-10-05 by mm123 ah
i actually got the email below from george mattson (of recent mattson mini modular fame) right after i posted my explanation. (oh, and you can check out his
Re: EML 400/401 Auto Set
2007-10-05 by k636akx
yes thankyou very much i saw in romeo s old post he actually posted a different manual to the one i have which mentions auto set and its possibilities tho you
RE: [emlsynth] Re: EML 400/401 Auto Set
2007-10-05 by mm123 ah
the auto set jack will reset the sequencer to step 1 when it receives a pulse. its commonly used to get the sequencer to play less than 32 or 16 steps. patch
Re: EML 400 User Manual
2007-10-05 by k636akx
you are a king! thankyou i actually had a different version of the manual for this machine (via mark glinksy) wish there were more people like you in the world
Re: EML 400/401 Auto Set
2007-10-05 by k636akx
oh by the way i have made about 70 tracks with my eml so i do have a little experience the auto set jack on the sequencer is not shown or mentioned in the
RE: [emlsynth] Re: EML 400/401 Auto Set
2007-10-05 by mm123 ah
sorry, i didnt mean to sound condescending, i just thought the manual does a good job at explaining EML400 functions, so if youre unsure about things you
Re: EML 400/401 Auto Set
2007-10-05 by k636akx
i did read the manual of course but maybe i missed it i must say, i am grateful for your reply but its a bit condescending, i don;t claim to be a pro or an
Re: [emlsynth] IL Turner EML Modules
2007-10-05 by Mike DB
... Do a search in the message archive here for Turner. I contacted Don Tillman who worked at Turner and designed some of the modules. Electronic Music Lab
IL Turner EML Modules
2007-10-05 by mm123 ah
i think there MAY actually be a connection between the IL Turner EML modules from NY and EML of Connecticut. ive seen an instrument that consists of a bunch
RE: [emlsynth] EML 400/401 Auto Set
2007-10-05 by mm123 ah
sounds like you should read the eml400 manual! im guessing its in the files page for this group. weve seen additional jacks and factory mods added to quite a
RE: [emlsynth] Re: OSC 2 blowing fuse on EML 200
2007-10-05 by Steve Ridley
... Splendid! ... If you look at the schematics for the 101, page 6 has VCO1. The squarewave output circuit is in the top right of the page. It goes to the
EML 400/401 Auto Set
2007-10-04 by k636akx
Hi everyone, this is my forst post, so chuffed to make it on here I have a 200 (blue) - really would like the extra input for the oscillators that the silver
Dualing 101s
2007-09-30 by sascha.victoria
Hey all, I recently picked up at second EML 101 SN 246. This one has +5 Volts, Glide, Gate, CM2, and CM3 in the Keyboard section. My other 101 is SN 1204. It
EML101 Amp / Ring Modulation problem !
2007-09-30 by robert andrew scott
Hi there, The Ring Modulation works as it should on my 101, but the Amplitude Modulation isn t working at all. Can anyone venture a guess as to what needs to
Re: OSC 2 blowing fuse on EML 200
2007-09-27 by Heath Finnie
Wow Steve, Good call. I checked the pot and there was a spot that was questionable in touching the faceplate. Cleaned it up and it s working great. NOW seeing
RE: [emlsynth] OSC 2 blowing fuse on EML 200
2007-09-27 by Steve Ridley
... If the wiper of the frequency pot is shorted to ground (or maybe to the case?), it would short out the power supply when you turned the pot to max. Check
OSC 2 blowing fuse on EML 200
2007-09-27 by Heath Finnie
My EML 200 is doing something strange. First off, OSC 2 is not working. BUT if I turn up the Frequency knob all the way, poof - the fuse is blown. Any ideas?
Re: Schematics for the 500
2007-09-17 by Mark Rauch
Howdy, Don t know how many were made, but I ve got 1, with operaing manual. I ll have to dig around and see if i have any schemos. rig ... anyone ... seems
Schematics for the 500
2007-09-16 by Nils Odegaard
Hi everyone I m new to this group. I might acquire an EML 500 in a few weeks that possibly has some issues. I couldn t find the schematics in the files folder,
Re: [emlsynth] EML 101 repairs / modifications !!
2007-09-16 by sascha victoria
I highly recommend Dave White in Boston (617 868 1819) for EML repairs. later Ben
EML 400/401 For Sale
2007-09-16 by sascha victoria
I have an EML 400/401 for sale in LA. It was recently serviced by Ed Miller in Hollywood. Its in perfect working order and is in almost mint condition. Please
Re: EML 101 mods
2007-09-15 by robert andrew scott
Hi there. Did you ever finish work on your EML ? Where are you located? I ve got several repairs and mods that I m planning to do on mine. . Though I could use
Re: NYC EML tech...
2007-09-15 by robert andrew scott
Hey there. Did you ever find someone ? -robert andrew scott ... 400/401 that could use a
EML 101 repairs / modifications !!
2007-09-15 by robert andrew scott
Hi, I live in Richmond, Virginia, and I m trying to find some help with my EML 101. The Pre-amp does not work, the Amplitude Modulation circuit isn t working,
EML-101 Buzzing Back to Life!
2007-09-15 by jonhoppe
Hello everyone ... Just a quick note and a question. - Wizard Electronics in Atlanta got my EML-101 (SN294) going again! It had been down since maybe 1990.
WTB: EML 300 or 301
2007-09-14 by Heath Finnie
I m looking to buy or trade for an EML 300 or 301 controller. I would prefer a 301, but am open to either. Thanks!
EML 101 OSC 1 problem. Only some waveforms working
2007-08-29 by Heath Finnie
I have an EML 101 and i noticed that on OSC 1 the saw, negative saw and square wave are not working. The triangle and narrow pulse work fine. I know its not
RE: [emlsynth] EML 101 Built-In-Reverb Modification/Upgrade !!
2007-08-26 by Hans Greuber
________________________________ To: emlsynth@yahoogroups.com From: sascha.victoria@gmail.com Date: Sun, 26 Aug 2007 09:26:31 -0700 Subject: Re: [emlsynth]
Re: [emlsynth] EML 101 Built-In-Reverb Modification/Upgrade !!
2007-08-26 by sascha victoria
My $100 built in reverb came as the EML 200 that I got for $100. booYA!
RE: [emlsynth] EML 101 Built-In-Reverb Modification/Upgrade !!
2007-08-25 by Hans Greuber
Mine already has.... and sounds impressive! ________________________________ To: emlsynth@yahoogroups.com From: quiet_channel@yahoo.com Date: Sat, 25 Aug
EML 101 Built-In-Reverb Modification/Upgrade !!
2007-08-25 by robert andrew scott
Hello! Does anyone have any information (schematics, etc) about the $100 built-in-reverb upgrade that was offered for the EML 101 ? I would really like to add
RE: [emlsynth] Re: EML 400 User Manual
2007-08-15 by Hans Greuber
Thanks for it! ... _________________________________________________________________ Prueba algunos de los nuevos servicios en línea que te ofrece Windows