slider knobs
2006-06-03 by billbigrig
howdy, you might consider buying some colored plasic rods, cutting them to lenth,(first chuck the rod in a drill and spin it against a gring wheel to round off
Messages
Browse messages
Page 8 of 14 · 679 messages matched
Re: EML 500 - Wanted Slider Knobs
2006-06-03 by Rick
Thanks for the info Steve I got this EML500 with a warning that it was non functional.. when i finally got it reassembled and figureed out which pins to attach
RE: [emlsynth] EML 500
2006-05-30 by Steve Ridley
... Some of the 400 circuits are very similar. They d be a starting point if you can t find any 500 schematics... Steve
EML 500
2006-05-26 by Rick
got a strange 500 yesterday.. anyone have schemos for this thing? is an early one with boards and parts dated 11-72.. will post some pics has differnet panel
RE: [emlsynth] Wild EML modules + parts on eBay
2006-05-19 by George Mattson
Sorry guys, I lied. The 3026 is actually a DIP package with 6 NPN transistors inside. Two of the transistors are precisely matched. EML used it in their
RE: [emlsynth] Wild EML modules + parts on eBay
2006-05-19 by George Mattson
Interesting. I ve heard about these things, but this is the first time I ve ever actually seen any. I m guessing that the four pots on the keyboard interface
RE: [emlsynth] Wild EML modules + parts on eBay
2006-05-18 by Steve Ridley
... The VCA is almost certainly the one from the 400. The schematic is in the files section of this group. Can t help with the rest. Steve
Re: [emlsynth] Wild EML modules + parts on eBay
2006-05-18 by David Cornutt
Interesting. I ve heard about these things, but this is the first time I ve ever actually seen any. I m guessing that the four pots on the keyboard interface
RE: [emlsynth] Wild EML modules + parts on eBay
2006-05-18 by George Mattson
Hi Phil, I see your friend is in Seattle. So am I. I have all of these modules and documentation for them. EML sold the modules independently and left the
Wild EML modules + parts on eBay
2006-05-18 by pzlonvent
my friend just put some EML stuff on ebay, some interesting modules, + he has parts as well. Lots of Arp stuff also.
RE: [emlsynth] EML 400 Schematics
2006-05-08 by Steve Ridley
... I ve scanned my expo converter and VCF schematics and put them in the literature & schematics section of the files space on this list, alongside the VCA.
EML 400 Schematics
2006-05-01 by vtl5c3
I found my copies last weekend. I ve cleaned up the scans a bit and uploaded to my web account at school. They can be found here:
RE: [emlsynth] center tapped pots
2006-04-15 by Masada Wilmot
I managed to find a handful of genuine A-B centre-tapped pots (various values) at a local surplus store - grabbed them all! I used to search the surplus stores
RE: [emlsynth] Questions about the EML 400/401
2006-04-15 by George Mattson
The V1,V2. etc are all voltage outputs from the slide bank. Note the top row has V1, Vclk. If the slide switch to the left of the row is put in one of those
Questions about the EML 400/401
2006-04-15 by ahfinnie11
I have never used an analog sequencer before bu I ve already started to understand this. But I was wondering what the V1, V2, V3 and V4 were. I can t seem to
EML 400/401 manual
2006-04-15 by heathfinnie
Does anyone have a copy of the manual for an EML 400/401 that they could share? Scanned .pdf is fine (or zipped .jpg or anything for that matter)... Thanks!
Inside the EML 100:
2006-04-06 by ahfinnie11
In my attempt to try to fix the ENV1 on my EML 100, I thought I would take these pictures of the inside of the EML 100. From what I ve seen of the pictures of
Re: Question about EML 100's Output mixer - OSC3/EXT
2006-04-05 by ahfinnie11
I sort of answered my own question now, but it caused another question. I learned that the OSC3/External knob in the Output mixer drones OSC3 unless something
Question about EML 100's Output mixer - OSC3/EXT
2006-04-04 by ahfinnie11
I have a question about the EML 100. In the output mixer section, there is a knob marked OSC3/EXT. When in the fully counterclockwise position there is
Re: [emlsynth] center tapped pots
2006-04-04 by klosmon
... I ve never found them anywhere. On the last two 101s I repaired, I ended up making my own (getting hold of standard 10k linear pots, taking them apart,
center tapped pots
2006-04-04 by ganesha
Hi, Does anyone know a place where I can buy 10k center tapped pots like used in the eml 101? Thanks, Regards, kris
New member
2006-04-04 by ahfinnie11
Hi, I just picked up an EML 100 (coincidently the one in the photos section it seems) and just thought I d say hi. In about a week I should also have a 400/401
New files up
2006-03-25 by Steve Ridley
Five new files for you to do with as you will. 100/101 mods for use with the 400 sequencer (2 pages) Info on using the EML200 with a 400. EML400 synth VCA and
Re: [emlsynth] 200
2006-03-24 by Steve Ridley
... I think the original EML 100 was v/hz too. AFAIK, the usual way to control the 200 was with a 300. I don t know how well the 200 VCOs would track v/hz -
What are those EML potentiometers called?
2006-03-21 by nicholas_kent
Just curious what you d call those Allen Bradley Type J pots EML uses that are null at 12 o clock and then fade in a different signal when turned either left
Re: [emlsynth] 200
2006-03-20 by sascha victoria
yeah, after referencing the schematic and a few phone calls i think you re right about the V/Hz oscillators on the 200. thats so annoying. i haven t had time
eml 500 schematics
2006-03-19 by billbigrig
Howdy, I also have an eml 500,(paid $20 for it in 95). I certainly would like to have schematics for it too. Thanx Rig
Wanted EML-500 schematics
2006-03-18 by m0n075
I got a few boards from an EML 500 here (the vca/modulator section) I wanna make some modules with them for my modcan system. Anyone can help me out? Regards,
RE: [emlsynth] 200
2006-03-14 by Steve Ridley
... The EML200 schematic shows what look like very crude linear (V/Hz) VCOs. AFAIK, the EML101 has exponential (V/Octave) VCOs. Unless your 200 is different
Re: 200
2006-03-10 by nicholas_kent
... came ... with ... the ... shed ... There s a pdf of the 200 manual in the files section for this group on Yahoo
200
2006-03-09 by sascha.victoria
hey all, i m new around here. about a year ago i got a 101. then over the past month i came across a 400/401 and a 200. i just brought the 200 home and was
RE: [emlsynth] Re: New to the group
2006-02-12 by George Mattson
Perhaps, I ll have some time to actually get to goof around in my own studio at the end of March. If anything postable comes of it, I ll post a link to the
Re: New to the group
2006-02-11 by synth_ollie
... wooow, very nice ! :) saw this pic on the web a couple of years ago and was really impressed ! can we har some sounds from it ? cheers OLLIE ... the
New to the group
2006-02-11 by syntar_dude
I m new to the group. I have been a proud EML owner since 1973. I posted pix of my sequencer and a pic of Dale and I from 1979 in the Files section.
RE: [emlsynth] cleaning EML pots
2006-02-07 by Masada Wilmot
I think that drilling holes etc is a bit much for these pots - just take the back off! I cleaned several very scratchy opts on an EML101 without disconnecting
Re: cleaning EML pots
2006-02-03 by spogfrawne
The pots in the EML 10 are Allen Bradley with an all metal casing. Maybe he used a small vacuum after drilling just in case some fillings fell inside. On other
Re: cleaning EML pots
2006-02-02 by nicholas_kent
... he put ... Analogue ... I was mostly hoping to confirm a substance or method was being used that didn t make a situation worse, because I ve heard storeies
Re: cleaning EML pots
2006-02-02 by spogfrawne
The guy who fixed my Eml101 drilled a small hole in the Pot case with a dremel. Then he put some contact cleaner inside. This method is used on Moogs and
cleaning EML pots
2006-01-06 by nicholas_kent
Perhaps people here could share their experiences regarding what worked well for them for cleaning scratchy EML pots?
eml polybox
2005-12-07 by ringmod45
Hi Group, I saw this on ebay, thought some of you might be interested. http://cgi.ebay.com/EML-Poly-box-near-mint-tech-tested-ready-to-
Zappa's Dub Room Special/EML-spotting
2005-11-26 by Mike DB
What a sleepy little group anyway I recently picked up the DVD of Frank Zappa s Dub Room Special. It s a wonderful video presentation of 2 different shows from
Buchla CV
2005-10-16 by nicholas_kent
I hear Buchla is using 1.2v/Oct on his new modules. Wonder if he used that on his old modules too?
POLY IS A CRACKER!!
2005-07-08 by analogback
just to say hi to every one one this list and a big THANKS to pannenscann for the POLY-BOX schematics :) hopefully now i can get my newly acquired orange
POLY IS A CRACKER!!
2005-07-08 by analogback
just to say hi to every one one this list and a big THANKS to pannenscann for the POLY-BOX schematics :) hopefully now i can get my newly acquired orange
FS: EML 100
2005-06-14 by Mark
Sorry, I meant to say that it has a different filter than an EML-101. ~~~ EML 100 $500 I have an EML 100 -- the bright blue predecessor of
FS: EML 100
2005-06-10 by Mark
EML 100 $500 I have an EML 100 -- the bright blue predecessor of the EML 101. I live in Connecticut where it was manufactured, and as far as
[FS] EML 101 vco board
2005-06-05 by m0n075
EML 101 VCO board. 150 euro please. Regards, Dennis
[FS] EML VCF Board
2005-06-05 by m0n075
I think it s an EML 101 vcf could be a 100 to. 120 euros please. Regards, Dennis
EML Factory pics in enhanced mode
2005-05-05 by Mike
I hope everyone here will forgive this indulgence. Part of my day job occasionally involves digitally restoring and revitalizing old pictures. It s one of the
Re: [emlsynth] Re: EML factory pics now in the Files section
2005-05-05 by Brandon Daniel
... Yeah, do a search in the AH archives for EML George Mattson PMS for the story. PMS was George Mattson, he prototyped the Syntar using EML hobby modules,