Re: Doug Slocum Howdy!
2010-09-10 by Doug
Hi Laurie, Sorry about the delayed reply to this. I think it s strange, but I don t think you & I ever met. We should remedy that! I ll email you. Doug
Messages
Browse messages
Page 4 of 14 · 679 messages matched
Re: replace sliders 400/401
2010-09-10 by Doug
John, I was NJ sales and service for EML back in the early days, but I m sorry to say I have never had or serviced a 400/401. Can you provide good closeup
Re: EML 301 Mystery
2010-09-10 by Doug
Sigi, Yes, good pictures would help. Laurie, Good to see you here! regards
Re: EML 301 Mystery
2010-09-09 by laurie_spiegel
EML 301 schematics are online here: http://www.synthfool.com/docs/EML/300_series/
EML 301 Mystery
2010-09-09 by methypnox
Does anyone have technical experience working with the EML 301 circuitry? I am rebuilding one that had the power line coming from 201 pulled off of boards and
replace sliders 400/401
2010-07-29 by sonofission
Hi, I have an eml 400/401 sequencer-synthesizer that has seen better days. The sliders are unruly and make dialing in the appropriate settings on the sequencer
RE: Hey_ Spammer removed, sorry.
2010-06-29 by mike_b_eml
Once in a while they sneak in. I m on it. Mike B
Re: Doug Slocum Howdy!
2010-04-27 by mirrormutt
Hi Doug, I think I vaguely remember you through the fog of so many years. I ran and taught in an Electrocomp studio at Bucks County Community College 1970 or
Doug Slocum Howdy!
2010-04-27 by Doug
Hi All, Just joined the forum and thought I d introduce myself. I was the NJ sales & service for EML (Synthetic Sound Labs) from about 1970 till sometime in
EML serial numbers
2010-03-23 by mike_b_eml
I think this has been discussed here before. EML serial numbers do not have any clear correlation to date of manufacture. One having a lower number than
Re: For Sale: EML Electrocomp 500
2010-03-20 by RICHARD
My EML 500 did not have a serial number on it that I could find. I wondered when it was manufactured myself when I first signed up for this group. Refer to
Re: [emlsynth] Re: For Sale: EML Electrocomp 500
2010-03-19 by Domenic Lippolis
Richard, Do you have the serial number off of the EML500 you sold? I would like to try to date my 500 and would like to compare serial numbers. Thanks, Dom
Re: For Sale: EML Electrocomp 500
2010-03-19 by RICHARD
The EML 500 synthesizer advertised in message #520 has been sold. Thanks to all who showed an interest. Rich
Re: [emlsynth] For Sale: EML Electrocomp 500
2010-03-16 by Roman
hello, if you still have it, I might be interested. Can you check the shipping cost to Poland? Doesn t have to be Priority Mail, Economy or slow boat is also
Re: For Sale: EML Electrocomp 500
2010-03-10 by RICHARD
For those of you that are interested in this synth, PayPal is no longer an option for payment. I didn t realize what was involved in setting up an account
Re: [emlsynth] For Sale: EML Electrocomp 500
2010-03-10 by sascha victoria
On second thought, I have enough projects but I m sure someone else will chime in. Sorry for getting your hopes up.
Re: [emlsynth] For Sale: EML Electrocomp 500
2010-03-10 by sascha victoria
Hey Richard, I ll take that for $250! Please email me and we can sort out the details. sascha.victoria@gmail.com thanks Ben
For Sale: EML Electrocomp 500
2010-03-10 by RICHARD
Offered for sale is an EML Electrocomp 500 analog synthesizer. An inspection of the date codes on various electronic components leads me to believe that this
spammer deleted
2010-02-10 by mike_b_eml
Sorry folks They are a sneaky bunch. gone now
Re: My EML MIDI Solutions
2010-01-13 by Rob
... Hi Robert I log on here once in a blue moon, your 101 is able to induce a delayed vibrato using one of the envelopes, the patch allows vibrato onlyb after
My EML MIDI Solutions
2010-01-13 by quiet_channel
Hello! I ve been reading some of the discussions of the EML101 and its MIDI-compatibility and I wanted to share my solutions! Firstly, the EML101 uses
Re: [emlsynth] FS: black Polybox
2009-10-24 by RSchwim295@aol.com
I also have no idea what they re worth so don t be offended if it s ridiculously low...I hope it s not but I could spend $300 on it now... Apologies if I m way
FS: black Polybox
2009-10-24 by Chris
i don t really know what to ask for it, so if you want it send me an offer. i can send pics.
Re: EML and MIDI
2009-10-20 by mike_b_eml
... I don t have my 400 set up where I could test that. I don t really use it that way but I know I got it to trigger off simple audio pulses. As I recall the
Re: [emlsynth] Re: EML and MIDI
2009-10-20 by Matt
Hi Genkyo, Dave is, I believe, a member of this group. MIDI is OK I guess, but I hate the way it makes everything convenient and repeatable - I feel the same
Re: EML and MIDI
2009-10-20 by electrocomp2010
Hi Matt, Great info! According to Dave Cornutt, you are right: CM3 input doesn t take 1.2V/oct scaling. He mentioned in his web page that he modified his EML
Re: EML and MIDI
2009-10-20 by oliverchesler
Hello Genkyo, Ah yes! A long time ago I had my EML-101 being somewhat controlled by a Kenton. I never could remember how I did it. Flash forward to your
Re: [emlsynth] Re: EML and MIDI
2009-10-20 by Matt
Hi Genkyo, I think you ll need to do a bit more searching on this subject as, if I remember correctly, although the oscilators on the EML-101 works on
Re: EML and MIDI
2009-10-20 by electrocomp2010
Hi Mike, Thanks for your reply. Can you clarify the following: do you mean to feed some voltage spikes to the Vext jack? And do you set the clock rate to
Re: EML and MIDI
2009-10-20 by electrocomp2010
Hi Matt, Thanks for your reply. Since I posted my last message I ve had some advancement. I ve found in the new feature section of the manual (last page) that
Re: EML and MIDI
2009-10-17 by mike_b_eml
... It may not be necessary to synch the sequencer speed to midi clock speed via some kind of midi to VC converter. The sequencer s VC clock can be driven by
Re: [emlsynth] EML and MIDI
2009-10-17 by Matt
Hi Genkyo, I don t think anyone has actually done it. When I bought my EML-101 I spoke to Kenton, who thought that they would be able to add MIDI funtionality
Re: EML and MIDI
2009-10-17 by billbigrig
Howdy, How about midi for the EML 500? Rig
EML and MIDI
2009-10-16 by electrocomp2010
Hello everyone, I just joined the group and this is my very first post. I ve read some past discussions about controlling EML synths with MIDI and no one
Re: Setting up JKJ CV-4 for EML 101 question
2009-09-28 by Rob
The seq. in jack should track fine with 1.2 volts, although I modded mine to accept the standard 1 v/oct and 1.2v/oct back in the 80 s, see here.
Re: [emlsynth] Setting up JKJ CV-4 for EML 101 question
2009-09-24 by Mike DB
... As a matter of fact JKJ was one of the companies that offered a custom mod to their CV/MIDI boxes for use with the EML voltage . I think there were others
Re: [emlsynth] Setting up JKJ CV-4 for EML 101 question
2009-09-23 by sascha victoria
None of the inputs on the front panel are 1.2 v/oct. Its pretty much a disaster getting MIDI to work with the EML 101. That being said, if anyone has done it
Re: [emlsynth] Setting up JKJ CV-4 for EML 101 question
2009-09-23 by RSchwim295@aol.com
thanks!
Re: [emlsynth] Setting up JKJ CV-4 for EML 101 question
2009-09-23 by Mike DB
Maybe you can reach Kyle Jarger. Last address I have is jkjelec@comcast.net . I think he is still on the Analog Heaven mailing
Setting up JKJ CV-4 for EML 101 question
2009-09-23 by RSchwim295@aol.com
I got the gate to work but I m not sure where the 1/4 CV goes into the 101...Nothing seems to work Rob Schwimmer
Search ALL Craigslist - Kijiji - Backpage
2009-06-21 by destories
RaveTrade.com has a Search ALL Craigslist program. It let s you search multiple states. I use it to find modules. They also have a Craigslist Genie . It
Re: [emlsynth] schematics for the EML-100?
2009-06-03 by rjeancarlo c
whats wrong with the synth? the eml 101 schematic is too similar to the 100 to have it sitting there for a year without fixing. let me know what its doing and
Re: for sale
2009-04-03 by k636akx
now on vemia / spheremusic auction
Re: EML Electrocomp 500 pot codes
2009-03-25 by ricky620@sbcglobal.net
I opened up my EML 500 to see if I could find any clues as to the date that it was made. I ve documented my exploration by adding pictures to the photo album
Re: [emlsynth] Re: EML Electrocomp 500
2009-03-24 by sprgroups@o2.co.uk
... are a way of ... Many ICs also carry date codes, often in the format yymm , eg 7923 would suggest an IC was made in the 23rd week of 1979. ICs may have
Re: [emlsynth] Re: EML Electrocomp 500 pot codes
2009-03-24 by Mike DB
By the way Pots refer to potentiometers, usually rotary controls with round knobs. On the 500 there is only that one Mic Vol that uses a rotary pot.
Re: [emlsynth] Re: EML Electrocomp 500
2009-03-24 by Mike DB
... Sorry I don t know about the pot codes. The codes would probably only tell you when the pots themselves were made. They could have been sitting in the
Re: EML Electrocomp 500
2009-03-24 by ricky620@sbcglobal.net
Mike, Is there a way to date my 500? I ve read somewhere that pot codes are a way of dating electronic equipment. what are they? Can you direct me to a
Re: EML Electrocomp 500
2009-03-24 by ricky620@sbcglobal.net
Rig, Of course I m no expert but don t think that my 500 has been modified since it left the factory. What do you mean by a more decorative case ? Were some
Re: [emlsynth] EML Electrocomp 500
2009-03-23 by Mike DB
No serial number is not unusual for EML. Also worth noting that serial numbers did not seem to be chronological and did not imply the number of pieces