Re: [emlsynth] Re: Yahoo groups going, going...
2019-10-28 by Jon Hoppe
Haven t been real active but sure have enjoyed the group... ! Hope it can live somewhere else... - Jon Chattanooga TN On Sunday, October 27, 2019, 05:41:25
Messages
Browse messages
Page 1 of 14 · 679 messages matched
Re: [emlsynth] Yahoo groups going, going...
2019-10-27 by tim@tummytouch.com
over on the Macbeth Studio Systems group we switched to Facebook. Not idea but at least it’s free. I’m on the road but is anyone able to archive all those
Re: Yahoo groups going, going...
2019-10-27 by dougslocum@...
I ve got a ton of cloud backup space and if necessary, I would be happy to archive the files, but not sure how to set things up on another board to make them
Re: [emlsynth] Re: Yahoo groups going, going...
2019-10-27 by brian arthur
I was hoping exactly the same thing Laurie! Are there any mods active here anymore? Anyone? ________________________________ From: emlsynth@yahoogroups.com
Re: Yahoo groups going, going...
2019-10-27 by laurie@...
All the files, schematics, etc. really need to be archived somewhere that people can find them in the future. There is a treasure trove of documentation on EML
Re: Yahoo groups going, going...
2019-10-27 by laurie@...
Can t this group be migrated to groups.io? They are trying to make it easy to do that including bringing over the Files and Photos and such stuff. My EML
Yahoo groups going, going...
2019-10-26 by brianarthur2@...
Hi All As most of you know Yahoo groups will cease to exist in December Shame to see this group go
Re: [emlsynth] Todd Barton- EMS VCS3 and EML 200
2018-11-20 by Jon Dent
Hello Brian, I ve just confirmed your request on FB. Im not on there very much. Are you on instagram? or we can also chat on messenger. Cheers Jono On Tue, Nov
Re: [emlsynth] Todd Barton- EMS VCS3 and EML 200
2018-11-20 by brianarthur2@...
Hey Jono!! I m well thanks, sent you a request on FB.
Re: Todd Barton- EMS VCS3 and EML 200
2018-11-19 by Jon Hoppe
Hello, Great to see a post and know the group is still alive again... ! - I used the EML-101 in an Electronic Music Camp I staged at TechTown in Chattanooga
Re: [emlsynth] Todd Barton- EMS VCS3 and EML 200
2018-11-19 by Jon Dent
Hello Brian, Thanks for the link. How are you doing? I haven t been to Melbourne for ages. Whats been happening with you? Cheers Jono On Sun, Nov 18, 2018 at
Todd Barton- EMS VCS3 and EML 200
2018-11-18 by brianarthur2@...
Long time no see! Hope you re all well, here is some beaut work from Todd Barton featuring the VCS3 and the EML 200
Re: [emlsynth] EML 200 electronic switch
2015-03-20 by klosmon
OK, thanks. That would indicate there s definitely something wrong with this unit. Will dig out the schematics & scope this weekend to try to track down the
RE: [emlsynth] EML 200 electronic switch
2015-03-20 by George Mattson
If you put two different VCO tones in each input. The gain control is basically the level control for each channel. Center both A and B On Time pots and it
Re: [emlsynth] EML 200 electronic switch
2015-03-20 by Nick Zampiello
i don t think they interact with each other. each one is a separate timer according to the manual. NEW ALLIANCE EAST!!!! ... New Alliance East - Mastering
EML 200 electronic switch
2015-03-20 by klosmon@...
Hello- I ve just acquired a 200 -- trying to understand the switch function. From what little is in the manual, and looking at the front panel, it would seem
[emlsynth] Re: EML 500 documentation
2015-03-15 by Laurie Spiegel
Once it is scanned and uploaded it would be great if a link to a download location for the schematics could be posted to the whole group, or the file(s)
Re: EML 500 documentation
2015-03-14 by lippolis1@...
Hi Bill, I can try to assist the best I can. I don t think that uploading it to this site will be an issue. Worse come to worse you can just email me what
Re: EML 500 documentation
2015-03-14 by bill bigrig
How stupid of me. I said I have the EML 500 manual, but asked for schematics, how unsocial of me. I would love to post this official manual, but don t know how
Re: EML 500 documentation
2015-03-13 by bill bigrig
Yes, me too please. I have the owners manual, but would like schematics.Rig
EML 500 documentation
2015-03-13 by lippolis1@...
Hi Folks, My 500 is going to go under the soldering iron hopefully soon (as time allows). I would like to get the service manual and the owners manual if
Re: [emlsynth] Re: EML 200 pot replacement
2015-02-22 by bill bigrig
If I know what a lid looks like, I can make them.Rig
Re: [emlsynth] Re: EML 200 pot replacement
2015-02-22 by bill bigrig
Gosh, now that were all here, is anyone willing to part with a 200 for a reasonable price? I just reviewed the owners manual for my 500, and it said the 200 is
Re: [emlsynth] Re: EML 200 pot replacement
2015-02-20 by Nick Zampiello
i want a replacement lid too! lol. NEW ALLIANCE EAST!!!! ... New Alliance East - Mastering New Alliance East - Facebook X :::: B :::: S On Friday, February
Re: EML 200 pot replacement
2015-02-20 by Mr. Fang
As an update, I was able to spray some control cleaner into the guts of the mod pots (after removing their 4 screws and back plates) and their performance
RE: [emlsynth] EML 200 pot replacement
2015-02-17 by Pete
A 110Kohm resistor in parallel with the outer lugs of one 1M pot will give you a total resistance of 99.09Kohm. Peter From: emlsynth@yahoogroups.com
Re: [emlsynth] EML 200 pot replacement
2015-02-17 by bill bigrig
Somewhere out there is a sheet that tells you how to do all sorts of things to pots by adding resistors. You could start with a dual 1 meg, add the resistors
EML 200 pot replacement
2015-02-17 by Mr. Fang
I just acquired an Electrocomp 200 with scratchy pots, and am looking for advice. The Allen-Bradley type J pots are fine, but the square cermet mod pots
RE: [emlsynth] Correct or Incorrect - EML 100 OSC 3 waves?
2014-11-13 by zaum@...
Thanks Peter for responding. I m talking about the (blue faceplate) EML 100, not the 101, it has different waves from the 101. I ve yet to see a full set of
RE: [emlsynth] Correct or Incorrect - EML 100 OSC 3 waves?
2014-11-12 by Pete
Hi. Where in the synth are you actually scoping for your waveforms? You should have triangle, sawtooth and square waves. I’m not so sure that graphic on
Correct or Incorrect - EML 100 OSC 3 waves?
2014-11-12 by zaum@...
Was scoping my EML100 s waves and I noticed the front panel for OSC 3 draws a Triangle, then what looks like a half rectified sine and then a square as the
Re: [emlsynth] EML 400-401 replacement slider knobs
2014-10-04 by George
Let me know if you find one. Somehow, I have miraculously managed to not lose any. ------ Original Message ------ From : dougslocum@gmail.com [emlsynth] To :
EML 400-401 replacement slider knobs
2014-10-04 by dougslocum@...
Anyone know a source?
RE: [emlsynth] EML 200 reverb help!! [2 Attachments]
2013-06-09 by brian arthur
Thanks Nick I have these, thought there may be some more detailed schematics or perhaps someones personal notes. cheers To: emlsynth@yahoogroups.com From:
Re: [emlsynth] EML 200 reverb help!!
2013-06-08 by Nick Zampiello
attached! NEW ALLIANCE EAST!!!! ... New Alliance East - Mastering New Alliance East - Facebook X :::: B :::: S ________________________________ From:
EML 200 reverb help!!
2013-06-08 by Brian Arthur
Hi! I,m trying to repair the reverb on my 200,I know that the tank is working. I have replaced 2 741 metal cans but am not sure what to tackle next. My techy
Improving the eml-101 envelopes
2013-03-24 by plutoniq9
Hi, I m thinking about beginning my age old plan to restore my eml-101 & add some useful modifications. The envelopes have always been a weak point I think for
Re: [emlsynth] Re: EML diy
2013-02-18 by Nick Zampiello
the EML 200 filter is simple and effective at that. it s not meant to be a synthesizer feature but is great for tonal shaping. run it in parallel through the
Re: [emlsynth] Re: EML diy
2013-02-18 by Nathan Siter
Hello, Well, firstly, I do realize there is a smaller, clone on the market. It is different in a few regards and also kind of not the point of DiY. I mean, I
Re: EML diy
2013-02-18 by goaqihai
Hello Nathan, Apparently I missed your message in october. I ve also had plans to clone the EML200, but I was not able to find the special pots (1M/100K
Re: EML diy
2013-02-18 by jondent@rocketmail.com
Hello Nathan, How is your cloning of the 200 going? Did you know that there is a Brazilian comapny (EMW) cloning the 200s already. I own an original EML 200 &
EML diy
2012-10-02 by nathan.siter
Hello, I realize this is possibly a controversial subject for some of you but I am going to go ahead and post this anyways. A few of you might actually be
Re: [emlsynth] Re: I need a new roof!
2012-08-08 by Mr. Fang
You sure you don t want to sell your ARP 2600 instead? It s worth more. :) -thomas
Re: I need a new roof!
2012-08-08 by Brian Folkes
Hmmm...maybe your right. But if I keep the $ high and it doesn t sell, my wife can t be mad at me if we have to get a loan! Well honey, I did try to sell
Re: [emlsynth] I need a new roof!
2012-08-08 by Mr. Fang
Awesome story, but you may have better luck with a lower price. 101s have been going for between $2600 and $3000 on eBay in the last year. I don t think one
I need a new roof!
2012-08-08 by Kyhotay
I can t believe it has come to this but I need to totally - and I mean totally - replace the roof of my house. As I look around at my highly prized
Re: [emlsynth] What the?
2012-08-06 by bill bigrig
There was one like that flying around in 03 or 04. It had 2 extra panels mounted vertical. Like this one, there was only one pair of oscillators. Rig
Re: [emlsynth] What the?
2012-08-04 by Prosper Prodaniuk
Its weird how quickly it got pulled down. Sentiencestudio is a very experienced seller and just sold a fixer upper 400/401 combo. It did look cool and had some
Re: [emlsynth] What the?
2012-08-04 by Mike DB
Nothing surprises me with EML. They seemed to be always trying out variations and modifications. It does look unfinished, like maybe someone special ordered a
What the?
2012-08-04 by Brian Arthur
Howdy! Someone just pointed this out on muffs I hope this link works..... http://www.ebay.com/itm/EML-500-vintage-analog-synth-synthesizer-/2308