Yahoo Groups archive
Messages
Page 5 of 168 · 8362 messages matched
2011-09-01 by John
I've loads of Sysex patch banks on my computer which i send via a Sysex dump program to my various synths when working with my DAW. Is it possible to do the same with Cirklon, and have all the sysex banks stored in memory (and upon power down) , call up the sysex bank list and to
2011-08-30 by Nick Koum
Dear Colin, you obviously know more about live manipulation of midi patterns. I honesty didn't had the time to read or watch the specs in detail of the P3 or the Cirklon, so i will do my homework soon... As far as Bill, having been involved in the Direct subject in the SOS Forums
2011-08-30 by Colin f
> real time transpotition of the patterns is a "must" for a > live sequencer like the Cirklon. Nothing quite like this > exist in the market today and the ability to control via Midi > patterns from an external mother keyboard is something that > only Bill Marshall's Zyklus did m
2011-08-30 by Nick Koum
Dear Colin, real time transpotition of the patterns is a "must" for a live sequencer like the Cirklon. Nothing quite like this exist in the market today and the ability to control via Midi patterns from an external mother keyboard is something that only Bill Marshall's Zyklus did
2011-08-29 by Colin f
> Yes, for example you set the key, say C, and you set the > scale, for example diatonic. Then when you set a new key, say > from C to D, all the notes changes corespondly, but thats the > way Zyklus MPS worked. Some times like that you get non > musical results, so must be a fil
2011-08-29 by Nick Koum
Yes, for example you set the key, say C, and you set the scale, for example diatonic. Then when you set a new key, say from C to D, all the notes changes corespondly, but thats the way Zyklus MPS worked. Some times like that you get non musical results, so must be a filter in ord
2011-08-29 by Colin f
> i want to know if Cirklon can change via Midi the key of the > recorded patterns using a master keyboard, via chord recognition. > For example, if the recorded pattern is in C, pressing a > chord in the master keyboard in D, to instanly change the key > of the pattern from C to
2011-08-29 by kartman_gr
Hi, i want to know if Cirklon can change via Midi the key of the recorded patterns using a master keyboard, via chord recognition. For example, if the recorded pattern is in C, pressing a chord in the master keyboard in D, to instanly change the key of the pattern from C to D.
2011-08-21 by Hans Greuber
FS DEVILFISH TB 303 , 2200 EUROS no midi. early model 220 [Non-text portions of this message have been removed]
2011-08-21 by Hans Greuber
With manuals. 1800 euros. one of the best TR´s I have seen, totally perfc, manuals. Thanks [Non-text portions of this message have been removed]
2011-08-13 by Barbara Fraser, Sequentix
Hi Guys Just a quick note to give you a link to the draft Cirklon manual that Colin uploaded earlier this week: http://www.sequentix.com/cirklon/cirklon-draft-um.pdf He will add more sections to the manual in due course, but I hope it is of interest in its current form. We've pre
2011-08-13 by Colin f
> Oops! That was meant for Analogue Heaven. Sorry for the > auto fill-in from my address book. It was interesting anyway. I went through exactly the same pain putting a PLED into my long departed 3300, about the same time as I was putting the first P3s together. http://www.colinf
2011-08-13 by James Coplin
Oops! That was meant for Analogue Heaven. Sorry for the auto fill-in from my address book. James R. Coplin *From:* James R. Coplin [mailto:james@ticalun.net] *Sent:* Friday, August 12, 2011 6:55 PM *To:* analogue-sequencer@yahoogroups.com; 'SDIY List' *Subject:* Korg SDD-3300 Dis
2011-08-12 by James R. Coplin
I've just replaced the displays in my three Korg SDD-3300 Triple Delay units. Since there was some talk about display upgrades recently on the list I thought I'd post this as pretty much every 3300 has dead displays by now. Finding a replacement that worked was a major hassle. I
2011-08-04 by Colin f
> On 3 August 2011 03:25, John wrote: > > > Any plans for smaller breakout boxes? ie with say 4 CV and > gate outs? I cant be the only one who has no need for the > full spec 16 CV 8 gate current design? > > ... or just a snake leading to jacks? While this would be > unweildy for
2011-08-04 by John Christian
On 3 August 2011 03:25, John wrote: > Any plans for smaller breakout boxes? ie with say 4 CV and gate outs? I cant be the only one who has no need for the full spec 16 CV 8 gate current design? ... or just a snake leading to jacks? While this would be unweildy for the full 24 con
2011-08-03 by John
Any plans for smaller breakout boxes? ie with say 4 CV and gate outs? I cant be the only one who has no need for the full spec 16 CV 8 gate current design? Thanks, John --- In analogue-sequencer@yahoogroups.com, "Colin Fraser" wrote: > > Hi Blair, > > > Even if the breakout-box i
2011-08-02 by Colin f
FYI, diagrams of proposed 3.5mm CVIO BOBs are here: -----Original Message----- From: Colin f [mailto:colin@colinfraser.com] Sent: 02 August 2011 12:06 To: 'cirklon-beta@yahoogroups.com' Subject: RE: [cirklon-beta] CVIO Eurorack Hi Dan, > Barbara mentioned that there could be a Eu
2011-08-02 by Colin Fraser
Hi Blair, > Even if the breakout-box is not ready, I would be prepared to > order a Cirklon if the analog i/o card is available... if the > breakout-box is just routing the analog outputs from the port > on the back of the Cirklon I would have no problems building > one myself. T
2011-08-02 by James Coplin
The analog IO is implemented and working. It is a DB25 port on the rear of the unit. In the meantime while the breakout box is still being finalized, I just purchased a DB25 shell and some pins and made my own snake breakout that ends in banana jacks. I'd say if you want a Cirklo
2011-08-02 by Colin f
Hi Mike, > Without even the slightest, teeniest, weeniest element of > nagging. I just sort of wondered. Vaguely. If there was any > news on the BOBs. I have the PCBs for the quarter-inch BOBs. I have designs for the 3.5mm boards, which I will order this week. > My eurorack has b
2011-08-02 by blairns
Thank you for the quick and informative response Colin! My request for inclusion on the next run is on the way... Regards Blair --- In analogue-sequencer@yahoogroups.com, "Colin Fraser" wrote: > > Hi Blair, > > > Even if the breakout-box is not ready, I would be prepared to > > o
2011-08-02 by blairns
Hello First off, my apologies, I have been "lurking" for a while but yet to post to the group. I joined as I am very interested in the Cirklon sequencer and was hoping to gain more information on when I could order one, and in particular, when the CV/gate I/O would be ready as I
2011-08-02 by weston_underwood
That was my point as well really Paul. The other advantage that the H8000 has is that it keeps my studio so warm. Boy does that thing chuck out some heat. Mike --- In analogue-sequencer@yahoogroups.com, Paul Nagle wrote: > > On 01/08/2011 21:29, weston_underwood wrote: > > Not re
2011-08-02 by weston_underwood
Hi Without even the slightest, teeniest, weeniest element of nagging. I just sort of wondered. Vaguely. If there was any news on the BOBs. My eurorack has been witnessing all of the fun the other synths have been having and is sitting there with great big tears in his eyes. Pleas
2011-08-01 by Paul Nagle
On 01/08/2011 21:29, weston_underwood wrote: > Not really tried the pedals so that cheers me up. I don't know of anything that competes with them in anywhere near the same price range. The pedals may not be god in a box but they're bloody good. :) Paul --- http://www.softroom.co.
2011-08-01 by weston_underwood
Not really tried the pedals so that cheers me up. Once I've got the Ck fully understood should be able to send some nice midi to the eventide. We def don't want Colin getting one however. I finally managed to get patches to load up yesterday after this thread reminded me how remi
2011-07-31 by Richard Scott
*Should have just bought one of each pedal. Probably more versatile!* totally not, and not as good sounding either, not even close On Sun, Jul 31, 2011 at 8:18 PM, weston_underwood wrote: > ** > > > Even worse than that, an H8000, but its the same deal. I just wish I had > time t
2011-07-31 by weston_underwood
Even worse than that, an H8000, but its the same deal. I just wish I had time to do some programming of my own on it. So far every time I sit down to start programming, it refuses to connect, I spend an hour trying to download the presets and then work on them, fail, get bored an
2011-07-30 by Colin f
> Cirklon step entry, a plinky noise from the sunsyn, played > through eventide black hole and a nice fat pad over the top. Is the black hole in a Space ? Some Eventide voodoo is on my major gas list since Nagle played me some AKS through black hole. C
2011-07-30 by weston_underwood
Cirklon step entry, a plinky noise from the sunsyn, played through eventide black hole and a nice fat pad over the top. Mmm. Possible with live and logic but no where as intuitive and fun somehow.
2011-07-25 by Colin f
> Can P3 patterns on Cirklon be used to step sequence chords, > or are they for monophonic lines only? You can use the aux rows to add up to 4 extra notes, for 5 note polyphony. The limitations are that all notes will share the common velocity value and length for the step. The a
2011-07-25 by John
Can P3 patterns on Cirklon be used to step sequence chords, or are they for monophonic lines only? John
2011-07-22 by Colin f
Hi Sunil, > Most of what you said is totally over my head... Sorry- I'm > not very technical at all! > I just wanted to > 1)sync my sh101 with the boss DR55 like i've seen the sync > done with the 101 and the 808. > 2)control the Sh101 with the P3 and create more interesting > pa
2011-07-22 by sunilsolanki@rogers.com
Hello Colin, Most of what you said is totally over my head... Sorry- I'm not very technical at all! My P3 has the DIN sync. I have never used/owned analog hardware before and to be honest have no idea what CV is (I know it means Controlled Voltage- but my knowledge ends there!) Y
2011-07-19 by John
Thank you Barbara. Will keep a look out for the updates. John --- In analogue-sequencer@yahoogroups.com, "Barbara Fraser, Sequentix" wrote: > > > > Hi John > > It will be a couple of weeks before we have prices confirmed for the CVIO options for the next production run. > > Cheer
2011-07-19 by Barbara Fraser, Sequentix
Hi John Colin will be working on break-out box design options next week. We'll keep you posted. Cheers Barbara Barbara Fraser Sequentix Music Systems --- In analogue-sequencer@yahoogroups.com, "John" wrote: > > --- In analogue-sequencer@yahoogroups.com, "Barbara Fraser" wrote: >
2011-07-19 by Barbara Fraser, Sequentix
Hi John It will be a couple of weeks before we have prices confirmed for the CVIO options for the next production run. Cheers Barbara Barbara Fraser Sequentix Music Systems --- In analogue-sequencer@yahoogroups.com, "John" wrote: > > > > --- In analogue-sequencer@yahoogroups.com,
2011-07-19 by Colin f
Hi, Do you just want to sync them (i.e. use their internal sequencer only) ? The DR55 has a 4 ppqn clock (which just means one-pulse-per-step), rather than DIN sync. I believe the 101 sequencer can be clocked with gate pulses (?). If your P3 has the DIN sync output rather than MI
2011-07-19 by Paul Nagle
On 19/07/2011 13:29, sunilsolanki@rogers.com wrote: > > Any help with this Colin/guys/gals??? You could always buy my Kenton Pro2000 MIDI/CV convertor for the SH-101, that's what I used for years until I got Cirklon. Or look for something cheaper like a Pro Solo. Been yonks since
2011-07-19 by sunilsolanki@rogers.com
Any help with this Colin/guys/gals??? Thanks! --- In analogue-sequencer@yahoogroups.com, "sunilsolanki@..." wrote: > > Hi there, > > I have just acquired a gorgeous grey SH-101 and the classic Boss DR-55 > drum machine. > These are the first bits of analog I have ever used, so be
2011-07-18 by John
--- In analogue-sequencer@yahoogroups.com, "Barbara Fraser" wrote: I'll publish a > price for the CVIO option excluding the break-out box as I think a few other > customers may also opt to go down the roll-your-own route. > Cheers > > Barbara Politely asking if there's been any u
2011-07-16 by Paul Nagle
On 16/07/2011 11:49, Colin Fraser wrote: > To be slightly more terminologically accurate, those are track values. LOL, oh yes. I think it was an early wacko idea to build it into instrument defs and, as you know, my own Local Reality Field extends quite far into General Reality..
2011-07-16 by Colin Fraser
> > What's that on your Cirklon screen, on the cover art of > track MoogyLan BogeyMan ? > > Not got mine yet and I haven't seen that screen in any > tutorial video. > > Probably the instrument definition for my Electrix Repeater? > IIRC anyway. To be slightly more terminologicall
2011-07-16 by Paul Nagle
On 15/07/2011 20:01, Ian Mantripp wrote: > Paul, > > What's that on your Cirklon screen, on the cover art of track MoogyLan BogeyMan ? > Not got mine yet and I haven't seen that screen in any tutorial video. Probably the instrument definition for my Electrix Repeater? IIRC anyway
2011-07-15 by Ian Mantripp
Paul, What's that on your Cirklon screen, on the cover art of track MoogyLan BogeyMan ? Not got mine yet and I haven't seen that screen in any tutorial video. Nice tracks btw :-) Ian On Thursday 14 July 2011 at 09:20, Paul Nagle wrote: > Hi Gang, > > apologies for the spam, I'm t
2011-07-14 by sunilsolanki@rogers.com
Hi there, I have just acquired a gorgeous grey SH-101 and the classic Boss DR-55 drum machine. These are the first bits of analog I have ever used, so be nice! Sorry if my questions seem stupid... I would like to sync them along with 3 MIDI synths and don't know how. The Roland h
2011-07-14 by sunilsolanki@rogers.com
Hi there I have just acquired a gorgeous grey SH-101 and the classic Boss DR-55 drum machine. These are the first bits of analog I have ever used, so be nice! Sorry if my questions seem stupid... I would like to sync them along with my MIDI gear and don't know how. The Roland has
2011-07-14 by Paul Nagle
Hi Gang, apologies for the spam, I'm trying out a new online music sales thing with my first solo Cirklon-based performance from March this year. You can listen to all tracks without buying; I'm still looking into how I can set special prices for specific groups or freebies etc.
2011-07-14 by Ditton33
Yes it's 3U but I use an extra 1U to give me convenient access to the rear panel which I have had mounted in desktop mode even though I rack it, pics here on the first two tracks... http://soundcloud.com/emp3 > >-----Original Message----- > >From: analogue-sequencer@yahoogroups.c