ancient hexagons
2009-05-08 by jesper
I found a really vintage hexagon on swedish site Blocket.se that I haven t got the heart to withheld from you! :D
Messages
Browse messages
Page 83 of 172 · 8595 messages matched
Re: [Simmons Drums] SIMMONS SDS 3 FOR SALE AS OF THE 07/05/09
2009-05-07 by Bubble Man
ah...no sticker im afraid. ... From: jesper Subject: Re: [Simmons Drums] SIMMONS SDS 3 FOR SALE AS OF THE 07/05/09 To:
Re: [Simmons Drums] SIMMONS SDS 3 FOR SALE AS OF THE 07/05/09
2009-05-07 by jesper
... Both the 3 and the 4 have small stickers, either on front or back of the unit (on the metal chassis, not the wood). Same goes for the original ClapTrap...
Re: [Simmons Drums] SIMMONS SDS 3 FOR SALE AS OF THE 07/05/09
2009-05-07 by Bubble Man
Thats interesting, i was speaking to the guy who owns Koby electronic drums in Liverpool, he s a electronic nut, and seemed to think some didn t have the
Re: [Simmons Drums] SIMMONS SDS 3 FOR SALE AS OF THE 07/05/09
2009-05-07 by Bubble Man
Sorry i should have said analogue drum synth , thanks for correcting me. Ryan ... From: heritage_flowline@btinternet.com
Re: [Simmons Drums] SIMMONS SDS 3 FOR SALE AS OF THE 07/05/09
2009-05-07 by jesper
... I keep my eyes on it just out of interest! :) Good luck... ...and yes, wonderful machine, even without the pads. But, afaik, all SDS-3 s have the MusicAid
Re: [Simmons Drums] SIMMONS SDS 3 FOR SALE AS OF THE 07/05/09
2009-05-06 by heritage_flowline@btinternet.com
its not a drum machine though Sent from my iPhone On 6 May 2009, at 22:39, bubbleman77 wrote: Hi all, Just wanted to let you know i
SIMMONS SDS 3 FOR SALE AS OF THE 07/05/09
2009-05-06 by bubbleman77
Hi all, Just wanted to let you know i will be posting my SDS3 on ebay on the 07/05/09 on a ten day auction. It s just the brain with no pads but i know how
sds7 kitselector / sds9 bassdrum legs
2009-05-05 by pagan_prosperity
Hi guys ! , Sorry for this little add , If anyone is looking for an sds7 kitselector , i have one for sale , And if anyone has spare sds9 bassdrum legs for
Re: [Simmons Drums] Source for SDSV, 7, 8 pad T-handle nuts
2009-05-02 by Roland Brenner
That s not the same nut I have ( again, weird sounding !?!?! ). The T-nuts I m referring to are from the 7/8 pearl tom mounts BT-3 that would be screwed to a
Re: [Simmons Drums] Source for SDSV, 7, 8 pad T-handle nuts
2009-05-01 by monzarottie
Ah, I see what you mean. http://uk.shopping.com/xPO-Pearl-UGN-6-Fluegelmutter-M6
Re: [Simmons Drums] Source for SDSV, 7, 8 pad T-handle nuts
2009-05-01 by blacklodgeed
Pearl does make a nut with the proper threading and a similar design - the Pearl UGN-6/2 - but, unfortunately, it does not work. The barrel is not long enough
Re: [Simmons Drums] Source for SDSV, 7, 8 pad T-handle nuts
2009-05-01 by monzarottie
Hi Roland, All is well and same to you. Good to know about the Pearl nuts. I ll pay a visit to some of the local drum shops this weekend to see if I can find
Re: [Simmons Drums] Source for SDSV, 7, 8 pad T-handle nuts
2009-05-01 by Roland Brenner
Hey Roger! Hope all is well ! I looked into this as well a while ago. The closest match I could find is the T-Handle nuts that pearl uses for their tom mounts.
Source for SDSV, 7, 8 pad T-handle nuts
2009-04-28 by monzarottie
Does anyone know of a source for replacement T-handle nuts in the US for the V, 7 and 8 series pads? I m missing a few. Many thanks!
Re: [Simmons Drums] Re: Eproms
2009-04-21 by jesper
... The stupid swede means _they re_ crunchy indeed -- electronically yours, jesper - -- --- ---- ----- ---- --- -- - www.electronic-obsession.se
Re: [Simmons Drums] Re: Eproms
2009-04-21 by jesper
... As mentioned before... If you re into experimental music, don t forget to check if there is something enjoyable on the eprom before erasing it. I ve even
Re: Eproms
2009-04-20 by andyc69uk
... Hi Ed, In my experience just about all are ok although no point paying top $ for individual chips on e-bay. Best bid or make an offer on a job lot of
Re: [Simmons Drums] Digest Number 1313
2009-04-20 by blacklodgeed
Awesome, guys. Thanks for the tips. I ll be using an EPB. Does that change anything?
Re: [Simmons Drums] Digest Number 1313
2009-04-20 by derrick simpson
Hi, I ve been watching this thread and have a question. I use among other synths and samplers, the sillicon mallet.........Could i somehow burn some chips of
Re: [Simmons Drums] Digest Number 1313
2009-04-20 by Gordon JC Pearce MM3YEQ
... Makes no difference to the SDS-7, as long as it s got the right number of pins. Where it does make a difference is in programming - typically a 27C128
Re: Eproms
2009-04-20 by tdecker1271
From my experience, if you are using the EPB, do not use the 27C64 and 27C128, as they are CMOS and require a higher voltage to burn. Attempting this results
Eproms
2009-04-20 by blacklodgeed
I need to buy eproms to burn for my SDS 7. I know I m looking for 2764 s and 27128 s but there seem to be differences within those types of eproms. What do I
Re: [Simmons Drums] simmons and midi
2009-04-08 by derrick simpson
WHERE TO BEGIN!!!!!!! Ok, midi is a protocol that will let you transmit/recieve data via a multi-pin cable...looks like a DIN cable. The data can be notes
Re: [Simmons Drums] simmons and midi
2009-04-08 by Patrice Jacquot
Hi, so what s the question ? What do you need to achieve this ? You could maybe use 2 MTMs or a PM16 Roland (for 16 pads connections ?) ... or whatever ... But
simmons and midi
2009-04-08 by p_k_daniels
Ok I have SDS1000/2000/9 and a multimallet, as well as an alessis D4. (I hope to get a V soon fingers crossed that the other ebay bidder has exceeded his
Re: Rubber pad finnish
2009-04-07 by derrick simpson
Pete, Another great suggestion to try. We re going to try all the methods suggested by memebers....thanks Derrick
Re:Rubber pad finnish
2009-04-07 by Pete Daniels
Quote I want to clean/refurbish my Sillicon Mallet playing surface. It is made of the rubber material as the vintage pads, and with time has become dull and
Re: [Simmons Drums] Simmons In Use
2009-04-07 by WT
I saw HL last year during their Dare 2008 tour. They played the whole album from start to finish and ended with various other hits. It was very very good. WT
Re: [Simmons Drums] Simmons In Use
2009-04-07 by jesper
... I consider HL one of the few 80 s act that are still around that hasn t made fools out of themselves. Many of the tracks recently released are still good.
Re: [Simmons Drums] Simmons In Use
2009-04-06 by derrick simpson
I m not sure if theyare alive.......i would deferr the Ken on that one since it was his run... Must have been fun to jump back into thre 80,s Derrick
Betr: [Simmons Drums] Simmons In Use
2009-04-06 by Berk Aarts
woooooowie great man but the human league, are they still alive Greeting Berk ... Is
Re: [Simmons Drums] Simmons In Use
2009-04-06 by derrick simpson
I use my sillicon mallet all the time. It died a couple weeks ago and i am taking the time to have my tech go over it completely and have a pair of D.I.s
Simmons In Use
2009-04-06 by ken_evans_99
Just played two big interstate shows opening for The Human League here in Australia. Used the SDS8 brain and SDS9 pads. All performed flawlessly. Is there
Re: [Simmons Drums] Re: Rubber pad finnish
2009-04-05 by jesper
... Not earlier than 1983 at least... and tuning. It has DCO s so I don t think it was tuning. There s a lot that can go wrong because of bad sockets though.
Re: Rubber pad finnish
2009-04-05 by derrick simpson
Gotti!! I remember the Oscar synth......i think we had a bad one cause would not hold tuning....early 80,s i thnk it was. Ill post re: the mallet s finnish
Re: [Simmons Drums] Re: Rubber pad finnish
2009-04-05 by jesper
... As with all such tips, please check on a small space first before going over the entire piece. But I ve used it on rubber, wood, metal etc with success.
Re: Rubber pad finnish
2009-04-05 by derrick simpson
Jesper, Thanks for the tip about Armorall......I hadnt thought of that product for this application. I was wooried about petroleum products that might erode
Re: Betr: [Simmons Drums] Rubber pad finnish
2009-04-05 by jesper
... Armor All is great on most surfaces. intended for car panels but great on old synths. :) -- electronically yours, jesper - -- --- ---- ----- ---- --- --
My Portakit & SDX
2009-04-04 by Roland Brenner
Hello Everyone, I ll be listing my Portakit tonight on eBay although it probably won t post until sometime tomorrow. Also, I m contemplating selling my SDX
Re: Rubber pad finnish
2009-04-04 by derrick simpson
Thanks to kind members of this group, I got schems emailed to me which I forwarded to my keyboard tech...he is working on it as we write I expect to have it
Betr: [Simmons Drums] Rubber pad finnish
2009-04-04 by Berk Aarts
hi cleaning with water and some kind of soap will keep the dirt away. In car shops they have rubberpolish/protector, that will do Berk PS is your Mallet
Re: [Simmons Drums] Digest Number 1307
2009-04-04 by blacklodgeed
Gordon. Thanks for the reply. No, I don t specifically need an EPB - I just want to be able to program my own eproms. However, my limited research into usb
Rubber pad finnish
2009-04-04 by derrick simpson
I want to clean/refurbish my Sillicon Mallet playing surface. It is made of the rubber material as the vintage pads, and with time has become dull and grey. I
Re: [Simmons Drums] Digest Number 1307
2009-04-04 by Gordon JC Pearce MM3YEQ
... Do you specifically want an EPB, or do you just want to make custom ROMs? You can blow a raw sample onto and EPROM with pretty much any EPROM programmer.
Re: SDS6 + SDS7 for sale?
2009-04-03 by k636akx
now on vemia / spheremusic auction, together with some other cool stuff
Re: [Simmons Drums] Help - Trying to find circuit diagram or some schematic for SDS9
2009-04-03 by derrick simpson
Manual manor?.........mark gilinski. ... -- Sent from my mobile device
Help - Trying to find circuit diagram or some schematic for SDS9
2009-04-03 by jbak3
I have a unit that has no snare sound. I swapped eproms and they are ok. I want to have a go at getting the old girl back to a fully functioning state. If
WTB: Simmons EPB
2009-04-01 by blacklodgeed
Anybody have a working EPB they d like to sell? If so, send me a message. Thanks. Ed
Re: [Simmons Drums] Digest Number 1304
2009-03-30 by Gordon JC Pearce MM3YEQ
... You *do* get them like that. The two positive terminals are just spot-welded onto the end of one cell, so they re connected together. You ll probably find