Yahoo Groups archive

Vintage Simmons Drums (UK) Users Group

Index last updated: 2026-04-03 01:20 UTC

Messages

Browse messages

Page 17 of 173 · 8603 messages matched

Re: Simmons Pads Party Paint!

2014-06-02 by paistekid@...

Hey Alan, thanks for the info but how do you remove the stripped rod? I don t see any screw around the trim to remove the rubber trim. Unless, I can use a

Thread view Attachments: 0

Re: Simmons Pads Party Paint!

2014-06-01 by music@...

Common problem..... the threads on the square Tension Rod tend to strip when overtightened. The pad actually does need that much of a grasp from the internal

Thread view Attachments: 0

Re: Simmons Pads Party Paint!

2014-05-31 by paistekid@...

Hi there, that s one cool paint job! Do u know how to fix the pad tightener? 2 of my sds9 pads screws no longer tighten to the mount. It seems no one knows

Thread view Attachments: 0

Re: Simmons Pads Party Paint!

2014-05-30 by music@...

OOOOOOOooooooooooo...... nice! Well done. A few years ago there were some SDS9 Pads on Ebay that someone painted Pink... It s actually pretty cool to see these

Thread view Attachments: 0

Simmons Pads Party Paint!

2014-05-28 by Nick Zampiello

ready for summer! WOOOOHOOO! ... I have a few sets of the old school Simmons octagonal drum pads... One set is a black and blue gradient pattern which is cool.

Thread view Attachments: 0

Re: Looking for SDSV kick spurs

2014-05-25 by Scott Gibbons

I use a Roland PM30 for monitoring, and I would highly recommend it for practice. Unlike what you would get with a keyboard amp, it has two satellite speakers

Thread view Attachments: 0

AW: [Simmons Drums] SDSV issue

2014-05-24 by buchnerelectronics@t-online.de

Hi Jose, welcome to the club. I run a repair shop for SDS all but 6 and X , by the way. I am located near Frankfurt, Germany. Best Michael ... Betreff:

Thread view Attachments: 0

SDSV issue

2014-05-23 by jose_sds8@...

Hi all I finally got an SDSV after a long time (yeah!). I received it this week and after buying some XLR-jack cables and making my own for output (damn 3rd

Thread view Attachments: 0

Looking for SDSV kick spurs

2014-05-23 by Kent Tran

Just scored on a great deal of 2 sets of the SDSV brains and SDS5 pads.  One problem, the kick pads is missing the spurs. Does anyone have one for sale or

Thread view Attachments: 0

Re: mtm to sds7 connector

2014-05-21 by alfpaches@...

Thanks, Jesper! Sadly, it seems to be there´s no way to find a replacement for this kind of ten pin male connector nowadays. :( If I´m wrong about that,

Thread view Attachments: 0

mtm to sds7 connector

2014-05-21 by alfpaches@...

Hi guys! Somebody knows if the connector to link the mtm to sds7 was the same type in both sides?. I mean, 10 male pins in both sides of the wire. Thanks in

Thread view Attachments: 0

Re: Looking for SDSV pads

2014-05-19 by jose_sds8@...

Thank you Scott. I saw it few days ago, the main problem is that I m from Spain. Shipment, import taxes... etc. Regards,

Thread view Attachments: 0

Looking for SDSV pads

2014-05-18 by jose_sds8@...

Hi! I m very interested in getting SDSV pads (or some SDS7 brain). If anyone has some to sell, fell free to contact me. Regards.

Thread view Attachments: 0

OT (?) xkcd

2014-05-16 by jesper

I try to check the great comics at xkcd when they appear online. I know I misinterpreted the last one a lot and on purpose, but this is quite funny in a

Thread view Attachments: 0

New file uploaded to Simmons_Drums

2014-05-13 by Simmons_Drums@yahoogroups.com

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Simmons_Drums group. File : /To test

Thread view Attachments: 0

AW: [Simmons Drums] Re: Anybody interested?

2014-05-13 by buchnerelectronics@t-online.de

Hi guys, it is highly recommended NOT to use any 19 brackets for the SDS7. Because the original metal box of SDS 7 is made of too thin material and therefore

Thread view Attachments: 0

Re: Anybody interested?

2014-05-07 by Jeff Biegert

I m in for some SDX FSR sensors, I have a couple pads that have deteriorated, cheers, Jeff

Thread view Attachments: 0

Re: Anybody interested?

2014-05-06 by <lance840@...>

Hi Alan, With SDX s any parts are welcome (especially FSR s IMO). I have three Tom pad and one Symbol pad that need replacements. Z1 Rubber Surfaces would be

Thread view Attachments: 0

Re: Anybody interested?

2014-05-05 by <music@...>

By Bass Drum skins I trust you mean the playing surfaces? I haven t looked into having those made up... however seeing as the SDX BD is essentially an SDS9

Thread view Attachments: 0

Re: Anybody interested?

2014-05-05 by <cheesegrater@...>

SDX Tom pads and FSR (Mine are actually in pretty good shape) But count me in for a one or two SDX bass drum skins - true they are not FSR based but the

Thread view Attachments: 0

Re: Anybody interested?

2014-05-04 by <music@...>

I forgot to add: - SDS7 Brain Rack Mounting Brackets (Rack Ears with bottom rails that fasten to the SDS7 case bottom) Cheers Alan

Thread view Attachments: 0

replacement rubber "rim"

2014-05-04 by jesper

Hi, have any of you found a good selection of angled rubber trimming to replace the rims of pads with? This is not for my Simmons gear but for the Seabro

Thread view Attachments: 0

Anybody interested?

2014-05-03 by <music@...>

I m currently investigaing having some NEW parts made up to replace bits and pieces that are failing or have lost the battle with time.. some are functional

Thread view Attachments: 0