Re: [Simmons Drums] Re: Update: Musicaid/Simmons Clap Trap II Buttons
2014-08-19 by jesper
Oh no, it s not a one trick pony! :-o It s great for many percussive noises and I have both mark 1 and 2. But I have no source for the controls though... --
Messages
Browse messages
Page 15 of 173 · 8603 messages matched
Re: Anybody interested?
2014-08-19 by music@...
I am desperately trying to get the factory to lower the cost and give me a break on the minimum quantities. But, sadly they are in the business of making money
Re: Update: Musicaid/Simmons Clap Trap II Buttons
2014-08-19 by sovereigng@...
Thanks for checking in regarding this post. I thought that the members were wiped out by a Martian bacteria or something. I expected one or two responses
Re: Update: Musicaid/Simmons Clap Trap II Buttons
2014-08-19 by philmurr@...
Good effort :) I had exactly the same problem, and many months of checking suppliers, ebay and other electronics forums led to a dead end for these buttons. I
Update: Musicaid/Simmons Clap Trap II Buttons
2014-08-19 by sovereigng@...
I have solved my problem. Use this post as a reference if you find yourself in the same situation. 1) The original momentary switches are manufactured by
SDS Brain!
2014-08-18 by jack mitchell
Hello all! I have wanted a Simmons kit since I started reading my Dads copies of Rhythm magazine (UK Drum may) in the late 1980 s!Today I bought a SDS 1000 kit
Musicaid/Simmons Clap Trap II Buttons
2014-08-18 by sovereigng@...
Some years ago I bought an analogue Claptrap. The humanizer button was always intermittent. It didn t bother me because I didn t use it seriously. I kept it
Re: [Simmons Drums] Re: SDS8 circuit pic
2014-08-18 by alfpaches@...
OK. Thanks a lot Malte!
[Simmons Drums] Re: SDS8 circuit pic
2014-08-18 by Malte Rogacki
The three wires vs. four wires situation could possibly come from the fact that your transformer has two separate 18V secondary windings while the other
Re: SDS8 circuit pic
2014-08-18 by alfpaches@...
Hola José. Muchas gracias por las fotos. En principio veo alguna cosa diferente. En tu SDS8 unicamente salen 3 cables hacia la placa, mientras que en la mia
Re: SDS8 circuit pic
2014-08-18 by alfpaches@...
Thanks Jesper
Re: SDS8 circuit pic
2014-08-18 by alfpaches@...
Gracias, José! Gracias, José!
Re: [Simmons Drums] Re: SDS8 circuit pic
2014-08-18 by jesper
I thought I had a pic but cannot find it. At least one of the three I ve owned was modified with swedish PSU though since our regulations regarding voltage and
Re: SDS8 circuit pic
2014-08-18 by jose_sds8@...
Buenas Alfonso, He subido alguna foto de la placa y de la zona de la fuente. No tienen mucha calidad pero espero que te sirvan. ... Hi Alfonso. I ve uploaded
Re: SDS8 circuit pic
2014-08-18 by alfpaches@...
I´d just need a pic of the wires leading from the transformer to the circuit board. And if it´s possible to know which type of transformer was the original.
SDS8 circuit pic
2014-08-16 by alfpaches@...
Hi all! Could anyone share a photo of the SDS8 motherboard? I bought recently one. It seems to have been manipulated by the previous owner, and I have the
VSDS-X
2014-08-16 by cdalcin@...
Hello Simmons friends! I would like to speak you about this software .... very very interesting .... VSDS-X .... Created by a musician for musicians ...
Re: SDX Schematics???
2014-08-15 by brucemason@...
contact me at brucemason@sky.com for general SDX tips etc.
Re: SDX #131 Lives (sort of)
2014-08-15 by brucemason@...
hi,I have most of what is available for the SDX , software and factory library, plus additional library. .I do charge for time and disks etc as it does take a
Re: Anybody interested?
2014-08-15 by datacode@...
I am definitely interested in the FSRs. How close are you to the 50 quantity pricing?If the 25 quantity is $140 USD each would the 50 quantity be $90 USD each?
Re: [Simmons Drums] Re: Does anyone know anything about 3D printing?
2014-08-15 by jesper
... I haven t tested those, but I _think_ at least the MTX share the buttons with TMI and MTM and TMI are different since the axis isn t of the same length. --
Re: Does anyone know anything about 3D printing?
2014-08-15 by Chris Cronin
Hi, As far as I m aware, the shafts of the knobs on the MTM are different to the SDE, SPM and SDS2000 (I ve checked these ones myself). Not sure about the
Re: Does anyone know anything about 3D printing?
2014-08-15 by airflamesred@...
You ll need to get the knob modeled and the file in .stl format. Aren t the MTM knobs the same as SDE and MTX?
Re: Anybody interested?
2014-08-14 by music@...
A quick nudge again to anyone wanting new FSRs for their SDX s.. I have heard from only a few of you.Also, I eight (8) pairs of SDS7 Rackmount Brackets
RE: [Simmons Drums] Looking to buy an SDS 2000.
2014-08-14 by music@...
A week or so ago, he offered up what he described as a “new, unused” MTM. The pictures showed an MTM wrapped in plastic.. which gave it the appearance of
RE: [Simmons Drums] Looking to buy an SDS 2000.
2014-08-14 by edrose1@...
Bummer. What d you buy and what was wrong with it?
RE: [Simmons Drums] Looking to buy an SDS 2000.
2014-08-13 by music@...
While on the topic of Ebay...Ebay Buyers beware.. there s a seller named rainw-danie who claims to be ex-Simmons in California. So, you think you can trust
Re: Does anyone know anything about 3D printing?
2014-08-13 by DAVID PINNINGTON
If you do searches for 3d printer agencies and laser scanner agencies in you local area or country you should be able to find a combination who can accurately
RE: [Simmons Drums] Looking to buy an SDS 2000.
2014-08-09 by Sam Zehr
There’s one on eBay currently, if that helps sam From: Simmons_Drums@yahoogroups.com [mailto:Simmons_Drums@yahoogroups.com] Sent: Thursday, August 7, 2014
Re: I WANT AN SDS 2000! I WILL DO ANYTHING FOR ONE!
2014-08-09 by dave21rogers@...
Check ebay.ca
Re: [Simmons Drums] Re: I WANT AN SDS 2000! I WILL DO ANYTHING FOR ONE!
2014-08-08 by Phil a
Anything ? Really ? Including looking up eBay ? Woah... then nothing will stop you right ? :) Phil On Fri, Aug 8, 2014 at 1:02 AM, morrisphilco@yahoo.com
Re: I WANT AN SDS 2000! I WILL DO ANYTHING FOR ONE!
2014-08-07 by morrisphilco@...
Any of the people from this post still have their SDS 2000 s and are still willing to sell? I realized it s been a really long time since I started this
Looking to buy an SDS 2000.
2014-08-07 by morrisphilco@...
Hey Everyone, I m looking to buy a SDS 2000. Ive been wanting one for many years and I finally have the means. I m willing to pay for shipping! If anyone has
Re: Does anyone know anything about 3D printing?
2014-08-01 by datacode@...
You should check out Shapeways. They can 3D print in a bunch of materials. Upload your 3D Designs to 3D Print - Shapeways
Re: [Simmons Drums] Re: Does anyone know anything about 3D printing?
2014-08-01 by Nick Zampiello
they can do metal printing too: Metal 3D Printing | Services Metal 3D Printing | Services Sometimes referred to as metal 3d printing or a
Re: Does anyone know anything about 3D printing?
2014-08-01 by Chris Cronin
Thanks Chris, That s very interesting. I found a slightly more detailed article off the back of your link:
Re: Does anyone know anything about 3D printing?
2014-08-01 by Chris Jenkins
From what I know of 3D printing, it s going to be huge. The potential seems to be that if you can design something (using 3D design software) you will be able
Re: Does anyone know anything about 3D printing?
2014-07-31 by derrick simpson
The implications are astonishing and boundless........if you can think it...you can likely make it!!! -- *Derrick Simpson* *Atmospherics
Does anyone know anything about 3D printing?
2014-07-31 by gushi1@...
Hi everyone, I was reading an article in Sound on Sound recently about how Moog have recently painstakingly built an accurate replica of Keith Emerson s
SDE Multiple Parameter Controls
2014-07-30 by edrose1@...
Hey All. Does anyone have the Definitions of Multiple Parameter Controls for Voice editing mentioned in the SDE manual? Both copies of the manual I have - one
Re: [Simmons Drums] Re: SDS6 valuation
2014-07-30 by Nick Zampiello
As to the Simmons SDS6 ... There was less than 110 ever made. How many are still around? probably 50? maybe less? Super rare, Beautiful to look at and fairly
Re: SDS6 valuation
2014-07-30 by warlandr63@...
The SDS6 is one of the less common pieces of Simmons kit. Not many were built when compared to some of the other products. As I candy when they are in use they
Re: SDS6 valuation
2014-07-28 by edrose1@...
1500 seems inflated. I d guess 600-900. More if it had MIDI. But, with vintage gear - especially those with very low production numbers - I m sure there s
SDS6 valuation
2014-07-27 by philmurr@...
Hi all - I ve a pretty good idea of the going rate of most Simmons kit, but was wondering what people thought of the price of an SDS-6, working, non-MIDI, good
Re: [Simmons Drums] Re: SDE expander
2014-07-25 by music@...
I did a factory reset (Hold down the PROGRAM Button and power it on) to no avail. I then tried what Jesper suggested again to no avail. The thing that did
Re: [Simmons Drums] Re: SDE expander
2014-07-25 by jesper
Have you tested to program a new sound, turned off and on again and recalled the new patch? Does that work? -- electronically yours, jesper - -- --- ---- -----
Re: SDE expander
2014-07-24 by music@...
Yesterday I fired up my SDE and to my disappointment, the wonderful sounds it used to produce had somehow been replaced by a terribly loud squall & squelching
Re: [Simmons Drums] Is this an SDSV?
2014-07-22 by superwolle70@...
http://www.kontaktchemie.com/KOC/KOCproductdetail.csp?product=KONTAKT%20PCC http://www.kontaktchemie.com/KOC/KOCproductdetail.csp?product=KONTAKT%20PCC
Re: SDS3 pads connector
2014-07-16 by alfpaches@...
Thanks for the information Scott!. I´ve spoken with Micha and he´ll make a connector to me. :) Thanks for the information Scott!. I´ve spoken with Micha and
Re: Re : [Simmons Drums] SDS3 pads connector
2014-07-14 by ALFONSO PACHES
Yes, Micha, I know that. It comes wrote in a sticker under the master pair of pads. Thanks a lot for all the information El Lunes 14 de julio de 2014 7:28,