Yahoo Groups archive
Messages
Page 13 of 173 · 8603 messages matched
2014-11-22 by Phil a
All only my opinion of course: 1. no need to clean anything as long as no spam is sent. Maybe put all sleeping members under moderated status and remove the
2014-11-22 by Nick Zampiello
i don t always post!but when i doit s about a Simmons drum!! speaking of which: new music featuring Simmons drums ( the recording is SDSV live i use a SDS1000
2014-11-22 by music@...
Jesper... I think you are doing a great job. As you are the admin, it should be your call to make decisions as you think best. Keep up the good work ! Cheers
2014-11-22 by philmurr@...
Hi there Jesper ! You re doing a great job as mod - don t change things. And please don t boot off those members who don t post - at least not without asking
2014-11-21 by VinceL
Jesper, I m a regular reader, but unfortunately, not much of a contributor. For the last several years, I have sadly neglected my Simmons gear for a number of
2014-11-21 by Scott Gibbons
... an ad. Is this a problem? (I ve let them pass this far, but would like your views on this.) I don t have a problem with this as long as the items posted
2014-11-21 by derrick simpson
I LOVE this list...please keep at it. On Fri, Nov 21, 2014 at 10:54 AM, Jacquot.Patrice@free.fr [Simmons_Drums]
2014-11-21 by sovereigng@...
Don t banish me! I own a Musicaid Claptrap and Silicon Mallet! I m still cool. I ve had bouncing issues w/ Yahoo for whatever reason but I get group mail
2014-11-21 by Jacquot.Patrice@...
Hi Jesper , you re doing a real fine job mate. I have no time now to evaluate all your questions sadly , but I trust you. I m more than satisfied by your
2014-11-21 by Jim Barber
Your doing a fine job. As far as deleting non-active members and overall cleanup that is good as long as any members who seem to be inactive are given the
2014-11-20 by jesper
Hi list members - it s moderator hour! :) I try to keep a good eye on this list. 99% of the communications flows smoothly. The message below was a phishing
2014-11-16 by Jacquot.Patrice@...
oh no Allan, I m not used to unpredictable kind of triggering... ;) I just don t use it at all when I need dynamic accuracy & go to ddrum or 2box... I wish
2014-11-16 by music@...
Yeah, it s pretty nice to slap one of these on a tired ZI pad and see immediate and drastic improvements. It took two years, two factories, and lots of
2014-11-16 by Jacquot.Patrice@...
Hi Alan , thanks for the update. As I said before, having new old stock FSRs, is it worthwhile for me...? that would be more accurate to compare new FSR with
2014-11-16 by music@...
Hi all..... After having been tested for a few months by myself a few others, the new FSRs deliver a much smoother and consistent 0-127 velocity response,
2014-11-16 by Jim Barber
No Not on my board. It has been removed from the circuit. Guess mine is a newer board as it doesn t show the cap silk screened. It is serial number 86 and
2014-11-16 by philmurr@...
Thanks Jim ! Mine definitely had the component in at some point as you can see where the legs have been cut off - With the sockets and switches facing
2014-11-15 by Jim Barber
I just spent the last 10 minutes looking for C16 on my expansion board and could not locate it nor could I find a silk screen indicating the part. Tell me
2014-11-15 by philmurr@...
Whilst we re talking about the SDS6, can anyone tell me the value of C16 on the expansion board, mine is missing and the schematics don t have values on them
2014-11-11 by Jim Barber
Ahh. I wondered what that switch was! Assume you mean the 6522. I ll touch the pins with my fingers. Any certain pins? I have a schematic but it is very
2014-11-10 by Michael Buchner
Hello, I once had a midied SDS6 in the shop with the same fault. Here is what I did: The midied SDS6 s don t have a working reset button any more, this was
2014-11-10 by Jim Barber
Thanks. I have ordered a 311 and will be in in a week or so. I am not getting the sync signal, only if I supply one to the sync in jack. Will let you know
2014-11-09 by philmurr@...
Did you ever manage to fix this ? You can check the 311, D-A converter and the VIA by altering the tempo pots and seeing if the readout changes. Sounds like
2014-11-04 by bikebimmonds@...
Pictures of SDS 2000 available at this link https://www.dropbox.com/sh/64hxa8d0dz6nxy9/AAARnWOQejfk9E82glFHimrza?dl=0 2 of the pads have Dink s in the front
2014-11-04 by gushi1@...
good story [long though]with the Korg ps3300 s so going back to about 93/94 ish there were 3 for sale in loot newspaper london for £10k for bloody ages, like
2014-11-03 by airflamesred@...
I was under the impression that Dave had regained the name in the UK (Europe?) which is why GC are still knocking out that Chinese gear. If 2 box could get
2014-11-03 by music@...
Only Dave knows for sure... and without facts it s all just speculation... let s not jump to any conclusions. A
2014-11-03 by rob.mayo@...
Agreed. An updated SDSV would be a stronger seller certainly. I dare say an updated version of the SDS7, released 12 months after the new V would also sell
2014-11-03 by chris@chriswareham.net
On 03 November 2014 at 10:23 rob.mayo@luxsci.net [Simmons_Drums] ... According to messages on this list, Dave Simmons has regained the rights to the Simmons
2014-11-03 by rob.mayo@...
So where s Dave got to with getting Simmons back? At the very least, there s a market for an SDSV re-release. If Moog and Dave Smith can successfully regain
2014-10-31 by bikebimmonds@...
Sorry all, haven t had a chance to get it out and post pics. Will do so over weekend. Thanks, Mike
2014-10-29 by Jim Barber
I have an SDS6 that has an issue with the scan on the matrix. Everything works. The Led’s lite with the pattern but when you play one the unit doesn’t
2014-10-29 by bikebimmonds@...
I dont have yahoo messenger. Could you email me on dykeitup at yahoo dot com? I ll Take some pics tonight as they have been requested by other users too.
2014-10-27 by miketc@...
Possibly Interested if you can Private Message me please ?
2014-10-26 by bikebimmonds@...
Hi there, I have an SDS 2000 kit, 5x12 pads and the brain. Its not in great nick to be honest, but I think it all works. If anyone s interested I ll test it
2014-10-22 by edrose1@...
No. It s from the output of the pad.
2014-10-21 by airflamesred@...
Just to be clear on this Ed, the pad out is the mic recording the surface hit to pro tools? And thanks very much for taking the time.
2014-10-21 by Jacquot.Patrice@...
... De: edrose1@swbell.net [Simmons_Drums] À: Simmons Drums Envoyé: Tue, 21 Oct 2014 17:47:34
2014-10-21 by edrose1@...
I did this with ProTools as I wanted to capture all three transients. My digital scope can only handle two inputs.
2014-10-21 by philmurr@...
That looks nice - what are you using for your scope display ?
2014-10-20 by edrose1@...
Trig Out Latency is just under 4ms; MIDI Out Latency is just over 4ms. Check out the picture in the Photos section.
2014-10-20 by Jacquot.Patrice@...
Hi there, It depends if you trigger by midi (quite some latency then) or in direct trig inputs... ... De: airflamesred@gmail.com [Simmons_Drums]
2014-10-19 by Nick Zampiello
i have a TMI that always felt a little latent. BUT. it s still better than the old Alesis D4 which was so late it was unplayable ( as a drummer ) NEW ALLIANCE
2014-10-19 by airflamesred@...
Has anyone done a latency check on an MTM? Just wondering how far things have come.
2014-10-10 by music@...
I use this in conjunction with a Shark Steam cleaner: Products | SuperClean http://www.supercleanbrands.com/products#15
2014-10-10 by Troff Meister
Hi Roger here , Troffmeister my lovely blue kit is in the pic gallery of old firstly big thanks to whoever , for the doc with sds7 kits 1 to 39 listed , really
2014-10-10 by morrisphilco@...
Is this seriously what black pads go for now? Or does this seem like foul play (shill bidding)? http://m.ebay.com/itm/131314625205?nav=SEARCH
2014-10-09 by Roland Brenner
I ve used this product on the surfaces and it works GREAT !
2014-10-09 by Michael Buchner
I made good experiences with spray oil like WD 40 or weapon oil. The oil creeps under the glue and makes it loose, but the creeping takes an hour or so. ...
2014-10-08 by mr_adams_beard@...
Isopropyl Alcohol is the thing to use on hot glue. It doesn t melt or dissolve it, but breaks the bond so you can just peel if off. Should be safe to use on