Re: [Simmons Drums] Voltage switching
2007-02-06 by Tommy Vernice
The don t believe the voltage is switchable on the SDS8. I know on the SDS 9 you can reconfigure the wires on the transformer to switch the voltage, but I
Messages
Browse messages
Page 122 of 172 · 8595 messages matched
Re: [Simmons Drums] mounts/hardwares
2007-02-06 by rehtakul2004
My pads works with pearl stom arms too, No Prob!
Re: mounts/hardwares
2007-02-06 by superwolle70
At least the SDSV pads appear in 2 different diameters depending on their age. These might be problematic. All others fit on any 3/8 tube arm (like Pearl
Re: [Simmons Drums] mounts/hardwares
2007-02-06 by Matt
I have pads from SDSV to SDS9 and they all work with Pearl tom arms without a problem, much better quality hardware too. ... fitting. Take a
Re: [Simmons Drums] Re: hello?
2007-02-06 by jesper@electronic-obsession.se
If I d had a mallet I d snatch the brain in two seconds! But as far as Simmons goes I m having a hard time counting model number above 5! ;) electronically
Re: [Simmons Drums] mounts/hardwares
2007-02-06 by jesper@electronic-obsession.se
My set is partly pearl but I wouldn t bet money it s always fitting. Take a pad under the arm and go to your local music instrument store and check/ask...
simmons sds7 drums
2007-02-06 by krocktoff
Hi, could someone help me try to restore some of the factory sounds in my sds7.
Voltage switching
2007-02-05 by ken_evans_99
Hi Guys, Is the transformer in the SDS8 switchable between voltages? (my Linndrum for example is internally switchable). Or if I get a US model (110V or
Re: mounts/hardwares
2007-02-05 by troffmeister2000
hi http://www.geocities.com/troffmeister2000/ my tom tom / snare stands provided by simmons for my sds7 were / are pearl stands and mounts ,check out the pics
mounts/hardwares
2007-02-05 by stone.skeleton
i need hardware to set up my kit - i only have the pads. will pearl mounts work? can someone give a list of other suitable hardware? thanks, st
Re: [Simmons Drums] Re: hello?
2007-02-05 by Pee Ghetto
no, the prices were in CDN dollars - even better! i am willing to bend to a degree... ... __________________________________________________ Do You Yahoo!?
SDS9 Snare Wiring
2007-02-05 by ken_evans_99
Can anyone tell me how the second piezo transducer in the SDS9 snare (the one mounted on the plastic frame) is meant to be wired to the 1/4 jack? The kit I m
Re: [Simmons Drums] Re: hello?
2007-02-05 by jesper@electronic-obsession.se
Wasn t there someone here _with_ a mallet but without the brain? Sounds like a match to me... Decent prices otherwise (if that s US dollars). electronically
Kick Spurs
2007-02-05 by ken_evans_99
Long shot but has anyone out there got a matching set of kick spurs/legs to suit the SDS9 kick/bass pad? Mine are ok but don t *quite* match :-/ Cheers, Ken.
Re: Re: [Simmons Drums] knob caps for SDS-V
2007-02-04 by jesper@electronic-obsession.se
Sure will... I ll let you know... And you re still on my MSN kw, I m off to bed now though... :) electronically yours, jesper - -- --- ---- ----- ---- --- -- -
Re: hello?
2007-02-04 by stone.skeleton
I would ask $150DN for the SDS9, since it s functionality is intermittent. the same for the SDS 800 ($150) and $200 for the SDS8 $150 for the sillion mallet
SV: Re: [Simmons Drums] knob caps for SDS-V
2007-02-04 by KW
yeah man... please buy two if there is any. i will transfer some money to your paypal account or if you want pg accept me on messenger please.... cheers...
Re: [Simmons Drums] knob caps for SDS-V
2007-02-04 by jesper@electronic-obsession.se
Hi! ... Bejoken had the normal knob too last time I was there (they re located in Malmö). Maybe I ll have some business there this or next week
Re: [Simmons Drums] simmons drums
2007-02-04 by jesper@electronic-obsession.se
Isn t that in the simmons.synth.net site? I have it around and have only kept it for the EPB-bit it covers since I have an EPB but no SDS-7... electronically
SV: [Simmons Drums] knob caps for SDS-V
2007-02-04 by KW
thanx Jesper, i bought some a month ago, seems like he did have some caps left.... now i just wonder where i can get two extra SDSV knobs with scruws and
Re: SDS9 Pad Repair
2007-02-04 by ken_evans_99
Heya Matt, Yep it s the kit from Bondi. I m in Brisbane but had a mate in Sydney collect and ship it for me. I didn t buy the brain, that went to Italy. I
simmons drums
2007-02-04 by krocktoff
Dose anyone no how i could find a copy of simmons sds7 creative use book.
Re: SDS9 Pad Repair
2007-02-04 by Matt
Hi there Ken You wouldn t by chance have bought this of the guy in Bondi? I saw a red SDS9 on ebay that I really wanted but he was only offering local
knob caps for SDS-V
2007-02-04 by jesper@electronic-obsession.se
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=260082832315&ssPageName=ADME:B:SS:US:1 Good seller BTW so I can recommend him. Otherwise I buy my spares at
Re: hello?
2007-02-02 by troffmeister2000
hi its pretty dead around here - if you are selling simmons stuff ebay is your best bet - tho i hate ebay myself , hate auctions - prefer to buy at a fair
Re: SDS9 Pad Repair
2007-02-02 by troffmeister2000
Hi there , here is my kit - which i am now keeping http://www.geocities.com/troffmeister2000/ if you want to chat , get in touch regards Roger :-) ... of ...
Re: [Simmons Drums] hello?
2007-02-02 by jesper@electronic-obsession.se
You bet it is - we have quite a lot of discussions going from time to time... electronically yours, jesper - -- --- ---- ----- ---- --- -- -
SDS9 Pad Repair
2007-02-02 by ken_evans_99
Hi, I m a new member in Australia. I bought myself a fairly beaten up red SDS9 kit recently, just the pads, stands and leads, not the brain. I m hoping to
Re: hello?
2007-02-01 by siliconbauhaus
maybe if you put down the amount youre looking for people might be more interested ?
also forsale, sds 200
2007-02-01 by stone.skeleton
somewhere in here... st
hello?
2007-02-01 by stone.skeleton
i though people would jump at these machines - is this forum populated? st
fs, various simmons brains
2007-01-29 by stone.skeleton
simmons sds 9 simmons sds 8 simmons sds 800 the sds 9 does not behave correctly, i expect a battery needs replacing. the sds 800 is also a bit weird, but it
for sale: various simmons things
2007-01-29 by stone.skeleton
simmons sds 9 simmons sds 8 simmons sds 800 the sds 9 does not behave correctly, i expect a battery needs replacing. the sds 800 is also a bit weird, but it
Betr: Re: [Simmons Drums] Simmons SDS 1 Eproms
2007-01-28 by Berk Aarts
dubbel COOL BERK! ... 8 ... to ... ________________________________________________________________________________________ 12move ADSL: Voordelig, snel en
Re: [Simmons Drums] Simmons SDS 1 Eproms
2007-01-28 by michael.buchner@debitel.net
Hi. I got a big collection too. You can listen to some of these sounds at simmonsmuseum.com. It is also possible to convert your favourite sounds from 16 bit
Betr: Re: Betr: [Simmons Drums] changed presentation of the list
2007-01-28 by Berk Aarts
Right again BERK! ... ________________________________________________________________________________________ 12move ADSL: Voordelig, snel en onbeperkt
Re: Betr: [Simmons Drums] changed presentation of the list
2007-01-28 by jesper
I think there are buyers getting a Simmons cause they somewhere, at the back of their head, recognise the name and/or the logo... And I bet the store
Betr: [Simmons Drums] changed presentation of the list
2007-01-28 by Berk Aarts
Sadly those people don t know better. They buy it because it s cheap, and not because of the name simmons But hey I agree BERK! ...
Re: [Simmons Drums] Re: Simmons SDS 1 Eproms
2007-01-28 by jesper@electronic-obsession.se
OK, I didn t know that... Anyway, if you re looking for that genuine and fat Simmons sound in the bass kick I doubt the SDS-1 can help. ;) Even a SDS-8 can
Re: Simmons SDS 1 Eproms
2007-01-28 by edrumr
All proms are digital. There are several Bass drum digital eproms for the SDS 1. FYI: these same eproms work with the SDS7 as well. How good they
Re: [Simmons Drums] Re: Simmons SDS 1 Eproms
2007-01-28 by jesper@electronic-obsession.se
There are a lot of different snares and toms around for the SDS-1, but I don t think I ve ever seen an original bass drum prom. I doubt they ever sounded
Re: [Simmons Drums] Re: Simmons SDS 1 Eproms
2007-01-27 by jeff klosterman
Very cool! Snare sounds, the classic Simmons tom sounds, kick drums if they made them. Just about anything really. Let me know if you find the list. Thanks a
Re: Simmons SDS 1 Eproms
2007-01-27 by edrumr
If you re in the US, I can help you. I have many, many eproms. I ll try and look for the list. I think they were about $20US each back in the day. If you know
Re: [Simmons Drums] Simmons SDS 1 Eproms
2007-01-27 by jeff klosterman
That would be great! Thanks sovereigng@aol.com wrote: I have a few at competitive prices. I ll dig up a price sheet for you. Greg [Non-text portions
ADT manual wanted
2007-01-27 by superwolle70
Hi list, does anyone have the ADT manual and can send me a digital or physical copy? Although the basic functions are pretty easy to handle, I would like to
changed presentation of the list
2007-01-27 by jesper@electronic-obsession.se
Hi List! I changed the list description from; This is a forum for users of the Simmons electronic drums, for sharing information, tips, etc. Since info on
Re: [Simmons Drums] simmons hook ups
2007-01-27 by jesper@electronic-obsession.se
Hi Stan! This list in _not_ for the Guitar Center Simmons rip-off. This is for the genuine and professional gear from the UK. Go back with the kit, ask for
simmons hook ups
2007-01-27 by stan
We just bought my son a set for christmas and the gentleman at the guitar center said that he could listen to his mp3 player and play along with his favorite
Re: [Simmons Drums] Simmons SDS 1 Eproms
2007-01-27 by sovereigng@aol.com
I have a few at competitive prices. I ll dig up a price sheet for you. Greg [Non-text portions of this message have been removed]
Simmons SDS 1 Eproms
2007-01-27 by synthmesc
Hello. Just recently re-purchased an SDS-1 and need some eproms or copies. If anyone can help, let me know what you have and prices. Thanks a ton! JK