Modular Synth Panels

--- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...> wrote:
>
> So the Klee and MFOS seq's are finally nearing their day. My conundrum:
> I don't want to order 50 expensive panels and sell 10. So...
> How many folks are in for these sequencers?
> They are Thomas White's great oval and circle designs. Thanks Thomas!
>
> Cheers,
> Scott Deyo
> The Bridechamber
> contact@...
> http://www.bridechamber.com
> Jealous Edison Record Kompany
> http://www.jealousedison.com
>

>
>
> So the Klee and MFOS seq's are finally nearing their day. My conundrum:
> I don't want to order 50 expensive panels and sell 10. So...
> How many folks are in for these sequencers?
> They are Thomas White's great oval and circle designs. Thanks Thomas!
>
> Cheers,
> Scott Deyo
> The Bridechamber
> contact@... <mailto:contact%40bridechamber.com>
> http://www.bridechamber.com <http://www.bridechamber.com>
> Jealous Edison Record Kompany
> http://www.jealousedison.com <http://www.jealousedison.com>
>
> __oo! for Good
> <http://us.lrd.yahoo.com/_ylc=X3oDMTJtOW9xNGttBF9TAzk3MzU5NzE0BF9wAzEEZ3JwSWQDODI1MTk1NQRncnBzcElkAzE3MDc3MDk4NjQEc2VjA25jbW9kBHNsawNicmFuZARzdGltZQMxMjM3MjI5OTM0;_ylg=1/SIG=11314uv3k/**http%3A//brand.yahoo.com/forgood>
>
> Get inspired
>
> by a good cause.
>
> Y! Toolbar
>
> Get it Free!
> <http://us.lrd.yahoo.com/_ylc=X3oDMTJvNDY5OHRhBF9TAzk3MzU5NzE0BF9wAzIEZ3JwSWQDODI1MTk1NQRncnBzcElkAzE3MDc3MDk4NjQEc2VjA25jbW9kBHNsawN0b29sYmFyBHN0aW1lAzEyMzcyMjk5MzQ-;_ylg=1/SIG=11c6dvmk9/**http%3A//toolbar.yahoo.com/%3F.cpdl=ygrps>
>
> easy 1-click access
>
> to your groups.
>
> Yahoo! Groups
>
> Start a group
> <http://groups.yahoo.com/start;_ylc=X3oDMTJvMXIzZDl1BF9TAzk3MzU5NzE0BF9wAzMEZ3JwSWQDODI1MTk1NQRncnBzcElkAzE3MDc3MDk4NjQEc2VjA25jbW9kBHNsawNncm91cHMyBHN0aW1lAzEyMzcyMjk5MzQ->
>
> in 3 easy steps.
>
> Connect with others.
>
> .
>
>

I plan to do one or the other.  The Klee is more likely assuming another board run which I have been watching for.  There is a small chance I will do both.

 

Ross

On 16 mrt 2009, at 19:58, Scott Deyo wrote:

> So the Klee and MFOS seq's are finally nearing their day. My
> conundrum:
> I don't want to order 50 expensive panels and sell 10. So...
> How many folks are in for these sequencers?
> They are Thomas White's great oval and circle designs. Thanks Thomas!

I'm in for the Klee panel. Can you give a price guestimate on these
panels? Maybe I'll order an MFOS just in case...

As usual, thanks for making this available. You're doing a wonderful
service to the synth diy community.

Ben

On Mon, Mar 16, 2009 at 12:46 PM, Ben Stuyts <ben@...> wrote:
> Hi Scott,
>
> On 16 mrt 2009, at 19:58, Scott Deyo wrote:
>
>> So the Klee and MFOS seq's are finally nearing their day. My
>> conundrum:
>> I don't want to order 50 expensive panels and sell 10. So...
>> How many folks are in for these sequencers?
>> They are Thomas White's great oval and circle designs. Thanks Thomas!
>
> I'm in for the Klee panel. Can you give a price guestimate on these
> panels? Maybe I'll order an MFOS just in case...
>
> As usual, thanks for making this available. You're doing a wonderful
> service to the synth diy community.
>
> Ben
>
>

>I'm in for a Klee.
>
>Yes, building a second one :)
>
>Paul

On Mon, Mar 16, 2009 at 4:00 PM, Jason Proctor <jason@...> wrote:
> i think you should relate what happened with the first one :-)
>
>>I'm in for a Klee.
>>
>>Yes, building a second one :)
>>
>>Paul
>
>



--
Ron Pool <amp1ron@...>

--- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...> wrote:
>
> So the Klee and MFOS seq's are finally nearing their day. My conundrum:
> I don't want to order 50 expensive panels and sell 10. So...
> How many folks are in for these sequencers?
> They are Thomas White's great oval and circle designs. Thanks Thomas!
>
> Cheers,
> Scott Deyo
> The Bridechamber
> contact@...
> http://www.bridechamber.com
> Jealous Edison Record Kompany
> http://www.jealousedison.com
>

On Mar 16, 2009, at 3:15 PM, Ron Pool wrote:

> I might be in for two Klee panels if panel parts are easy to source.
> Where can I see what Thomas White's Klee layout looks like?
>
> On Mon, Mar 16, 2009 at 4:00 PM, Jason Proctor <jason@...>
> wrote:
> > i think you should relate what happened with the first one :-)
> >
> >>I'm in for a Klee.
> >>
> >>Yes, building a second one :)
> >>
> >>Paul
> >
> >
>
> --
> Ron Pool <amp1ron@...>
>

--- On Mon, 3/16/09, Scott Deyo <contact@...> wrote:

> From: Scott Deyo <contact@...>
> Subject: Re: [ModularSynthPanels] Klee and MFOS sequencer
> To: ModularSynthPanels@yahoogroups.com
> Date: Monday, March 16, 2009, 1:26 PM
> I'll be posting the design this week, hopefully.
> Panel parts shouldn't be bad.
> Wiring... lots of fun!
>
> Scott Deyo
> The Bridechamber
> contact@...
> http://www.bridechamber.com
> Jealous Edison Record Kompany
> http://www.jealousedison.com
>
>
> On Mar 16, 2009, at 3:15 PM, Ron Pool wrote:
>
> > I might be in for two Klee panels if panel parts are
> easy to source.
> > Where can I see what Thomas White's Klee layout
> looks like?
> >
> > On Mon, Mar 16, 2009 at 4:00 PM, Jason Proctor
> <jason@...> wrote:
> > > i think you should relate what happened with the
> first one :-)
> > >
> > >>I'm in for a Klee.
> > >>
> > >>Yes, building a second one :)
> > >>
> > >>Paul
> > >
> > >
> >
> > --
> > Ron Pool <amp1ron@...>
> >

On Mar 16, 2009, at 3:37 PM, loopcycle wrote:

>
> id like to see the final design too, and get a rough idea of the cost
> of the klee panel. i have a second kit sitting around and id prefer to
> have a nice panel for it.
>
> --- On Mon, 3/16/09, Scott Deyo <contact@...> wrote:
>
> > From: Scott Deyo <contact@...>
> > Subject: Re: [ModularSynthPanels] Klee and MFOS sequencer
> > To: ModularSynthPanels@yahoogroups.com
> > Date: Monday, March 16, 2009, 1:26 PM
> > I'll be posting the design this week, hopefully.
> > Panel parts shouldn't be bad.
> > Wiring... lots of fun!
> >
> > Scott Deyo
> > The Bridechamber
> > contact@...
> > http://www.bridechamber.com
> > Jealous Edison Record Kompany
> > http://www.jealousedison.com
> >
> >
> > On Mar 16, 2009, at 3:15 PM, Ron Pool wrote:
> >
> > > I might be in for two Klee panels if panel parts are
> > easy to source.
> > > Where can I see what Thomas White's Klee layout
> > looks like?
> > >
> > > On Mon, Mar 16, 2009 at 4:00 PM, Jason Proctor
> > <jason@...> wrote:
> > > > i think you should relate what happened with the
> > first one :-)
> > > >
> > > >>I'm in for a Klee.
> > > >>
> > > >>Yes, building a second one :)
> > > >>
> > > >>Paul
> > > >
> > > >
> > >
> > > --
> > > Ron Pool <amp1ron@...>
> > >
>
>

On Mon, Mar 16, 2009 at 1:40 PM, Scott Deyo <contact@...> wrote:
> I'm thinking $80-$100.
> The FPE is nearly $300!!!!!!! There's a WTF for ya, huh?
>
> Scott Deyo
> The Bridechamber
> contact@...
> http://www.bridechamber.com
> Jealous Edison Record Kompany
> http://www.jealousedison.com
>
>
> On Mar 16, 2009, at 3:37 PM, loopcycle wrote:
>
>>
>>  id like to see the final design too, and get a rough idea of the cost of
>> the klee panel. i have a second kit sitting around and id prefer to have a
>> nice panel for it.
>>
>>  --- On Mon, 3/16/09, Scott Deyo <contact@...> wrote:
>>
>>  > From: Scott Deyo <contact@...>
>>  > Subject: Re: [ModularSynthPanels] Klee and MFOS sequencer
>>  > To: ModularSynthPanels@yahoogroups.com
>>  > Date: Monday, March 16, 2009, 1:26 PM
>>  > I'll be posting the design this week, hopefully.
>>  > Panel parts shouldn't be bad.
>>  > Wiring... lots of fun!
>>  >
>>  > Scott Deyo
>>  > The Bridechamber
>>  > contact@...
>>  > http://www.bridechamber.com
>>  > Jealous Edison Record Kompany
>>  > http://www.jealousedison.com
>>  >
>>  >
>>  > On Mar 16, 2009, at 3:15 PM, Ron Pool wrote:
>>  >
>>  > > I might be in for two Klee panels if panel parts are
>>  > easy to source.
>>  > > Where can I see what Thomas White's Klee layout
>>  > looks like?
>>  > >
>>  > > On Mon, Mar 16, 2009 at 4:00 PM, Jason Proctor
>>  > <jason@...> wrote:
>>  > > > i think you should relate what happened with the
>>  > first one :-)
>>  > > >
>>  > > >>I'm in for a Klee.
>>  > > >>
>>  > > >>Yes, building a second one :)
>>  > > >>
>>  > > >>Paul
>>  > > >
>>  > > >
>>  > >
>>  > > --
>>  > > Ron Pool <amp1ron@...>
>>  > >
>>
>>
>

--- On Mon, 3/16/09, Paul Lord <plord@...> wrote:

From: Paul Lord <plord@...>
Subject: Re: [ModularSynthPanels] Klee and MFOS sequencer
To: ModularSynthPanels@yahoogroups.com
Date: Monday, March 16, 2009, 1:48 PM

The Thomas White rotary design is in teh top level directory of the
Files section for this group, and yes, the FPE is almost 3x what Scott
is proposing. That leaves a lot of dosh for 38 (?) super high end
switches.

Paul

On Mon, Mar 16, 2009 at 1:40 PM, Scott Deyo <contact@bridechambe r.com> wrote:
> I'm thinking $80-$100.
> The FPE is nearly $300!!!!!!! There's a WTF for ya, huh?
>
> Scott Deyo
> The Bridechamber
> contact@bridechambe r.com
> http://www.bridecha mber.com
> Jealous Edison Record Kompany
> http://www.jealouse dison.com
>
>
> On Mar 16, 2009, at 3:37 PM, loopcycle wrote:
>
>>
>>  id like to see the final design too, and get a rough idea of the cost of
>> the klee panel. i have a second kit sitting around and id prefer to have a
>> nice panel for it.
>>
>>  --- On Mon, 3/16/09, Scott Deyo <contact@bridechambe r.com> wrote:
>>
>>  > From: Scott Deyo <contact@bridechambe r.com>
>>  > Subject: Re: [ModularSynthPanels ] Klee and MFOS sequencer
>>  > To: ModularSynthPanels@ yahoogroups. com
>>  > Date: Monday, March 16, 2009, 1:26 PM
>>  > I'll be posting the design this week, hopefully.
>>  > Panel parts shouldn't be bad.
>>  > Wiring... lots of fun!
>>  >
>>  > Scott Deyo
>>  > The Bridechamber
>>  > contact@bridechambe r.com
>>  > http://www.bridecha mber.com
>>  > Jealous Edison Record Kompany
>>  > http://www.jealouse dison.com
>>  >
>>  >
>>  > On Mar 16, 2009, at 3:15 PM, Ron Pool wrote:
>>  >
>>  > > I might be in for two Klee panels if panel parts are
>>  > easy to source.
>>  > > Where can I see what Thomas White's Klee layout
>>  > looks like?
>>  > >
>>  > > On Mon, Mar 16, 2009 at 4:00 PM, Jason Proctor
>>  > <jason@redfish. net> wrote:
>>  > > > i think you should relate what happened with the
>>  > first one :-)
>>  > > >
>>  > > >>I'm in for a Klee.
>>  > > >>
>>  > > >>Yes, building a second one :)
>>  > > >>
>>  > > >>Paul
>>  > > >
>>  > > >
>>  > >
>>  > > --
>>  > > Ron Pool <amp1ron@gmail. com>
>>  > >
>>
>>
>

> I don't want to order 50 expensive panels and sell 10. So...
> How many folks are in for these sequencers?
> They are Thomas White's great oval and circle designs. Thanks Thomas!

> i would like to put in a request for this panel design though. can
> the pot mounting holes be punched for the smaller 16mm alpha pots
> instead of the larger bourns/spectrol pots? should we poll the
> group to see who's using smaller alphas VS larger pots like the
> bourns?
>
>
> ok, now here's a really stupid idea that i'd love: punch the jack
> mounting holes small to accommodate 3.5mm jacks. please dont beat
> me for suggesting it. (im doing more and more diy with mini jacks
> these days and scaling back my 1/4" collection.)

>>ok, now here's a really stupid idea that i'd love:  punch the jack mounting holes small to accommodate 3.5mm jacks.  please dont beat me for suggesting it.  (im doing more and more diy with mini jacks these days and scaling back my 1/4" collection.)<<

Hans, please report for flogging!  :-)

On Mar 16, 2009, at 4:34 PM, loopcycle wrote:

> ok, looked quickly at the design and it looks badass.  i would most
> likely pick up a panel.
> one criticism though--if you're going to do the electro music dot com
> graphic, make sure it reads
>
> electro-music.com
>
> (INCLUDE THE HYPHEN because electromusic.com would be wrong.)
>
> i would like to put in a request for this panel design though.  can
> the pot mounting holes be punched for the smaller 16mm alpha pots
> instead of the larger bourns/spectrol pots?  should we poll the group
> to see who's using smaller alphas VS larger pots like the bourns?
>
>
> ok, now here's a really stupid idea that i'd love:  punch the jack
> mounting holes small to accommodate 3.5mm jacks.  please dont beat me
> for suggesting it.  (im doing more and more diy with mini jacks these
> days and scaling back my 1/4" collection.)
>
> hans
>
>
>
>
>
>
> --- On Mon, 3/16/09, Paul Lord <plord@...> wrote:
>> From: Paul Lord <plord@...>
>> Subject: Re: [ModularSynthPanels] Klee and MFOS sequencer
>> To: ModularSynthPanels@yahoogroups.com
>> Date: Monday, March 16, 2009, 1:48 PM
>>
>>
>> The Thomas White rotary design is in teh top level directory of the
>> Files section for this group, and yes, the FPE is almost 3x what
>> Scott
>> is proposing. That leaves a lot of dosh for 38 (?) super high end
>> switches.
>>
>> Paul
>>
>> On Mon, Mar 16, 2009 at 1:40 PM, Scott Deyo <contact@bridechambe
>> r.com> wrote:
>> > I'm thinking $80-$100.
>> > The FPE is nearly $300!!!!!!! There's a WTF for ya, huh?
>> >
>> > Scott Deyo
>> > The Bridechamber
>> > contact@bridechambe r.com
>> > http://www.bridecha mber.com
>> > Jealous Edison Record Kompany
>> > http://www.jealouse dison.com
>> >
>> >
>> > On Mar 16, 2009, at 3:37 PM, loopcycle wrote:
>> >
>> >>
>> >>  id like to see the final design too, and get a rough idea of the
>> cost of
>> >> the klee panel. i have a second kit sitting around and id prefer
>> to have a
>> >> nice panel for it.
>> >>
>> >>  --- On Mon, 3/16/09, Scott Deyo <contact@bridechambe r.com>
>> wrote:
>> >>
>> >>  > From: Scott Deyo <contact@bridechambe r.com>
>> >>  > Subject: Re: [ModularSynthPanels ] Klee and MFOS sequencer
>> >>  > To: ModularSynthPanels@ yahoogroups. com
>> >>  > Date: Monday, March 16, 2009, 1:26 PM
>> >>  > I'll be posting the design this week, hopefully.
>> >>  > Panel parts shouldn't be bad.
>> >>  > Wiring... lots of fun!
>> >>  >
>> >>  > Scott Deyo
>> >>  > The Bridechamber
>> >>  > contact@bridechambe r.com
>> >>  > http://www.bridecha mber.com
>> >>  > Jealous Edison Record Kompany
>> >>  > http://www.jealouse dison.com
>> >>  >
>> >>  >
>> >>  > On Mar 16, 2009, at 3:15 PM, Ron Pool wrote:
>> >>  >
>> >>  > > I might be in for two Klee panels if panel parts are
>> >>  > easy to source.
>> >>  > > Where can I see what Thomas White's Klee layout
>> >>  > looks like?
>> >>  > >
>> >>  > > On Mon, Mar 16, 2009 at 4:00 PM, Jason Proctor
>> >>  > <jason@redfish. net> wrote:
>> >>  > > > i think you should relate what happened with the
>> >>  > first one :-)
>> >>  > > >
>> >>  > > >>I'm in for a Klee.
>> >>  > > >>
>> >>  > > >>Yes, building a second one :)
>> >>  > > >>
>> >>  > > >>Paul
>> >>  > > >
>> >>  > > >
>> >>  > >
>> >>  > > --
>> >>  > > Ron Pool <amp1ron@gmail. com>
>> >>  > >
>> >>
>> >>
>> >
>
>

--- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...> wrote:
>
> sure and sure.
>
> what is the diameter for those 16mm, anyway? if folks need bigger it
> would be easy to drill them bigger, eh?
>
> the jacks... i think most people would beat you for that one....
>
> Scott Deyo
> The Bridechamber
> contact@...
> http://www.bridechamber.com
> Jealous Edison Record Kompany
> http://www.jealousedison.com
>
>
> On Mar 16, 2009, at 4:34 PM, loopcycle wrote:
>
> > ok, looked quickly at the design and it looks badass.  i would most
> > likely pick up a panel.
> > one criticism though--if you're going to do the electro music dot com
> > graphic, make sure it reads
> >
> > electro-music.com
> >
> > (INCLUDE THE HYPHEN because electromusic.com would be wrong.)
> >
> > i would like to put in a request for this panel design though.  can
> > the pot mounting holes be punched for the smaller 16mm alpha pots
> > instead of the larger bourns/spectrol pots?  should we poll the group
> > to see who's using smaller alphas VS larger pots like the bourns?
> >
> >
> > ok, now here's a really stupid idea that i'd love:  punch the jack
> > mounting holes small to accommodate 3.5mm jacks.  please dont beat me
> > for suggesting it.  (im doing more and more diy with mini jacks these
> > days and scaling back my 1/4" collection.)
> >
> > hans
> >
> >
> >
> >
> >
> >
> > --- On Mon, 3/16/09, Paul Lord <plord@...> wrote:
> >> From: Paul Lord <plord@...>
> >> Subject: Re: [ModularSynthPanels] Klee and MFOS sequencer
> >> To: ModularSynthPanels@yahoogroups.com
> >> Date: Monday, March 16, 2009, 1:48 PM
> >>
> >>
> >> The Thomas White rotary design is in teh top level directory of the
> >> Files section for this group, and yes, the FPE is almost 3x what
> >> Scott
> >> is proposing. That leaves a lot of dosh for 38 (?) super high end
> >> switches.
> >>
> >> Paul
> >>
> >> On Mon, Mar 16, 2009 at 1:40 PM, Scott Deyo <contact@bridechambe
> >> r.com> wrote:
> >> > I'm thinking $80-$100.
> >> > The FPE is nearly $300!!!!!!! There's a WTF for ya, huh?
> >> >
> >> > Scott Deyo
> >> > The Bridechamber
> >> > contact@bridechambe r.com
> >> > http://www.bridecha mber.com
> >> > Jealous Edison Record Kompany
> >> > http://www.jealouse dison.com
> >> >
> >> >
> >> > On Mar 16, 2009, at 3:37 PM, loopcycle wrote:
> >> >
> >> >>
> >> >>  id like to see the final design too, and get a rough idea of the
> >> cost of
> >> >> the klee panel. i have a second kit sitting around and id prefer
> >> to have a
> >> >> nice panel for it.
> >> >>
> >> >>  --- On Mon, 3/16/09, Scott Deyo <contact@bridechambe r.com>
> >> wrote:
> >> >>
> >> >>  > From: Scott Deyo <contact@bridechambe r.com>
> >> >>  > Subject: Re: [ModularSynthPanels ] Klee and MFOS sequencer
> >> >>  > To: ModularSynthPanels@ yahoogroups. com
> >> >>  > Date: Monday, March 16, 2009, 1:26 PM
> >> >>  > I'll be posting the design this week, hopefully.
> >> >>  > Panel parts shouldn't be bad.
> >> >>  > Wiring... lots of fun!
> >> >>  >
> >> >>  > Scott Deyo
> >> >>  > The Bridechamber
> >> >>  > contact@bridechambe r.com
> >> >>  > http://www.bridecha mber.com
> >> >>  > Jealous Edison Record Kompany
> >> >>  > http://www.jealouse dison.com
> >> >>  >
> >> >>  >
> >> >>  > On Mar 16, 2009, at 3:15 PM, Ron Pool wrote:
> >> >>  >
> >> >>  > > I might be in for two Klee panels if panel parts are
> >> >>  > easy to source.
> >> >>  > > Where can I see what Thomas White's Klee layout
> >> >>  > looks like?
> >> >>  > >
> >> >>  > > On Mon, Mar 16, 2009 at 4:00 PM, Jason Proctor
> >> >>  > <jason@redfish. net> wrote:
> >> >>  > > > i think you should relate what happened with the
> >> >>  > first one :-)
> >> >>  > > >
> >> >>  > > >>I'm in for a Klee.
> >> >>  > > >>
> >> >>  > > >>Yes, building a second one :)
> >> >>  > > >>
> >> >>  > > >>Paul
> >> >>  > > >
> >> >>  > > >
> >> >>  > >
> >> >>  > > --
> >> >>  > > Ron Pool <amp1ron@gmail. com>
> >> >>  > >
> >> >>
> >> >>
> >> >
> >
> >
>

On Mar 16, 2009, at 10:22 PM, wjhall11 wrote:

> So far as Will and I are concerned, the smaller holes are just fine
> (assuming they'd be in the same spot as the larger holes)- we'll drill
> them out no prob. But I'll warrant that you, Scott, would probably be
> willing to drill them out for someone who needs the service for a few
> bucks, right? So it's not like someone really needs to have a
> drill-press and step-drill to have a usable panel with the larger
> holes... you could do it for anyone who would rather pay a couple
> extra for it than drill for themselves.
>
> A thought, tho - will our English step-drill neatly fit into metric
> holes to enlarge them? Hmmmm....
>
> Bill (and Will)
>
> --- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...>
> wrote:
> >
> > sure and sure.
> >
> > what is the diameter for those 16mm, anyway? if folks need bigger it
> > would be easy to drill them bigger, eh?
> >
> > the jacks... i think most people would beat you for that one....
> >
> > Scott Deyo
> > The Bridechamber
> > contact@...
> > http://www.bridechamber.com
> > Jealous Edison Record Kompany
> > http://www.jealousedison.com
> >
> >
> > On Mar 16, 2009, at 4:34 PM, loopcycle wrote:
> >
> > > ok, looked quickly at the design and it looks badass.  i would
> most
> > > likely pick up a panel.
> > > one criticism though--if you're going to do the electro music dot
> com
> > > graphic, make sure it reads
> > >
> > > electro-music.com
> > >
> > > (INCLUDE THE HYPHEN because electromusic.com would be wrong.)
> > >
> > > i would like to put in a request for this panel design though. 
> can
> > > the pot mounting holes be punched for the smaller 16mm alpha pots
> > > instead of the larger bourns/spectrol pots?  should we poll the
> group
> > > to see who's using smaller alphas VS larger pots like the bourns?
> > >
> > >
> > > ok, now here's a really stupid idea that i'd love:  punch the jack
> > > mounting holes small to accommodate 3.5mm jacks.  please dont
> beat me
> > > for suggesting it.  (im doing more and more diy with mini jacks
> these
> > > days and scaling back my 1/4" collection.)
> > >
> > > hans
> > >
> > >
> > >
> > >
> > >
> > >
> > > --- On Mon, 3/16/09, Paul Lord <plord@...> wrote:
> > >> From: Paul Lord <plord@...>
> > >> Subject: Re: [ModularSynthPanels] Klee and MFOS sequencer
> > >> To: ModularSynthPanels@yahoogroups.com
> > >> Date: Monday, March 16, 2009, 1:48 PM
> > >>
> > >>
> > >> The Thomas White rotary design is in teh top level directory of
> the
> > >> Files section for this group, and yes, the FPE is almost 3x what
> > >> Scott
> > >> is proposing. That leaves a lot of dosh for 38 (?) super high end
> > >> switches.
> > >>
> > >> Paul
> > >>
> > >> On Mon, Mar 16, 2009 at 1:40 PM, Scott Deyo <contact@bridechambe
> > >> r.com> wrote:
> > >> > I'm thinking $80-$100.
> > >> > The FPE is nearly $300!!!!!!! There's a WTF for ya, huh?
> > >> >
> > >> > Scott Deyo
> > >> > The Bridechamber
> > >> > contact@bridechambe r.com
> > >> > http://www.bridecha mber.com
> > >> > Jealous Edison Record Kompany
> > >> > http://www.jealouse dison.com
> > >> >
> > >> >
> > >> > On Mar 16, 2009, at 3:37 PM, loopcycle wrote:
> > >> >
> > >> >>
> > >> >>  id like to see the final design too, and get a rough idea of
> the
> > >> cost of
> > >> >> the klee panel. i have a second kit sitting around and id
> prefer
> > >> to have a
> > >> >> nice panel for it.
> > >> >>
> > >> >>  --- On Mon, 3/16/09, Scott Deyo <contact@bridechambe r.com>
> > >> wrote:
> > >> >>
> > >> >>  > From: Scott Deyo <contact@bridechambe r.com>
> > >> >>  > Subject: Re: [ModularSynthPanels ] Klee and MFOS sequencer
> > >> >>  > To: ModularSynthPanels@ yahoogroups. com
> > >> >>  > Date: Monday, March 16, 2009, 1:26 PM
> > >> >>  > I'll be posting the design this week, hopefully.
> > >> >>  > Panel parts shouldn't be bad.
> > >> >>  > Wiring... lots of fun!
> > >> >>  >
> > >> >>  > Scott Deyo
> > >> >>  > The Bridechamber
> > >> >>  > contact@bridechambe r.com
> > >> >>  > http://www.bridecha mber.com
> > >> >>  > Jealous Edison Record Kompany
> > >> >>  > http://www.jealouse dison.com
> > >> >>  >
> > >> >>  >
> > >> >>  > On Mar 16, 2009, at 3:15 PM, Ron Pool wrote:
> > >> >>  >
> > >> >>  > > I might be in for two Klee panels if panel parts are
> > >> >>  > easy to source.
> > >> >>  > > Where can I see what Thomas White's Klee layout
> > >> >>  > looks like?
> > >> >>  > >
> > >> >>  > > On Mon, Mar 16, 2009 at 4:00 PM, Jason Proctor
> > >> >>  > <jason@redfish. net> wrote:
> > >> >>  > > > i think you should relate what happened with the
> > >> >>  > first one :-)
> > >> >>  > > >
> > >> >>  > > >>I'm in for a Klee.
> > >> >>  > > >>
> > >> >>  > > >>Yes, building a second one :)
> > >> >>  > > >>
> > >> >>  > > >>Paul
> > >> >>  > > >
> > >> >>  > > >
> > >> >>  > >
> > >> >>  > > --
> > >> >>  > > Ron Pool <amp1ron@gmail. com>
> > >> >>  > >
> > >> >>
> > >> >>
> > >> >
> > >
> > >
> >
>
>

>
> The Thomas White rotary design is in teh top level directory of the
> Files section for this group, and yes, the FPE is almost 3x what Scott
> is proposing. That leaves a lot of dosh for 38 (?) super high end
> switches.

On Mar 16, 2009, at 10:43 PM, Scott Juskiw wrote:

> Can someone please post a jpg or gif of this panel (for those who
> can't read FPE files)? Thank you.
>
> >
> > The Thomas White rotary design is in teh top level directory of the
> > Files section for this group, and yes, the FPE is almost 3x what
> Scott
> > is proposing. That leaves a lot of dosh for 38 (?) super high end
> > switches.
>
>

>
> http://www.naturalrhythmmusic.com/mfos.html
>
> at the bottom
>

On Mar 16, 2009, at 10:59 PM, Scott Juskiw wrote:

> Oops, I meant is there an image of the Klee panel somewhere?
>
> >
> > http://www.naturalrhythmmusic.com/mfos.html
> >
> > at the bottom
> >
>

--- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...> wrote:
>
> So the Klee and MFOS seq's are finally nearing their day. My conundrum:
> I don't want to order 50 expensive panels and sell 10. So...
> How many folks are in for these sequencers?
> They are Thomas White's great oval and circle designs. Thanks Thomas!
>
> Cheers,
> Scott Deyo
> The Bridechamber
> contact@...
> http://www.bridechamber.com
> Jealous Edison Record Kompany
> http://www.jealousedison.com
>

On Tue, Mar 17, 2009 at 12:22 AM, stevemodularland <steve@...> wrote:

I've already paid for my KLEE :-)

And with regards to format- all holes for jacks / pots / LEDs should confirm to MOTM standards...

I will join in the beating for all those 3.5mm people...

Will you be putting together hardware kits as well? I uploaded a BOM to here for the Klee Front Panel hardware a while back... happy to receive comments on that one

--- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...> wrote:
>

> So the Klee and MFOS seq's are finally nearing their day. My conundrum:
> I don't want to order 50 expensive panels and sell 10. So...
> How many folks are in for these sequencers?
> They are Thomas White's great oval and circle designs. Thanks Thomas!
>
> Cheers,
> Scott Deyo
> The Bridechamber

> contact@...

> http://www.bridechamber.com
> Jealous Edison Record Kompany
> http://www.jealousedison.com
>

--- On Mon, 3/16/09, Scott Deyo <contact@...> wrote:

> From: Scott Deyo <contact@...>
> Subject: Re: [ModularSynthPanels] Klee and MFOS sequencer
> To: ModularSynthPanels@yahoogroups.com
> Date: Monday, March 16, 2009, 9:11 PM
> oh, no, i don't think so yet. i have one 98% done if
> Thomas doesn't hate my (necessary, i swear) changes, and
> if OK'd i'll post it on the site and/ or group.
>
> Scott Deyo
> The Bridechamber
> contact@...
> http://www.bridechamber.com
> Jealous Edison Record Kompany
> http://www.jealousedison.com
>
>
> On Mar 16, 2009, at 10:59 PM, Scott Juskiw wrote:
>
> > Oops, I meant is there an image of the Klee panel
> somewhere?
> >
> > >
> > > http://www.naturalrhythmmusic.com/mfos.html
> > >
> > > at the bottom
> > >
> >

--- On Mon, 3/16/09, klstay <klstay@...> wrote:

From: klstay <klstay@...>
Subject: [ModularSynthPanels] Re: Klee and MFOS sequencer
To: ModularSynthPanels@yahoogroups.com
Date: Monday, March 16, 2009, 3:48 PM

Put me down for 1 Klee. (I have the PCBs and parts kit just waiting for this panel run.)

> I don't want to order 50 expensive panels and sell 10. So...
> How many folks are in for these sequencers?
> They are Thomas White's great oval and circle designs. Thanks Thomas!

--- On Mon, 3/16/09, Scott Deyo <contact@...> wrote:

> From: Scott Deyo <contact@...>
> Subject: Re: [ModularSynthPanels] Klee and MFOS sequencer
> To: ModularSynthPanels@yahoogroups.com
> Date: Monday, March 16, 2009, 1:40 PM
> I'm thinking $80-$100.
> The FPE is nearly $300!!!!!!! There's a WTF for ya,
> huh?
>
> Scott Deyo
> The Bridechamber
> contact@...
> http://www.bridechamber.com
> Jealous Edison Record Kompany
> http://www.jealousedison.com
>
>
> On Mar 16, 2009, at 3:37 PM, loopcycle wrote:
>
> >
> > id like to see the final design too, and get a rough
> idea of the cost of the klee panel. i have a second kit
> sitting around and id prefer to have a nice panel for it.
> >
> > --- On Mon, 3/16/09, Scott Deyo
> <contact@...> wrote:
> >
> > > From: Scott Deyo
> <contact@...>
> > > Subject: Re: [ModularSynthPanels] Klee and MFOS
> sequencer
> > > To: ModularSynthPanels@yahoogroups.com
> > > Date: Monday, March 16, 2009, 1:26 PM
> > > I'll be posting the design this week,
> hopefully.
> > > Panel parts shouldn't be bad.
> > > Wiring... lots of fun!
> > >
> > > Scott Deyo
> > > The Bridechamber
> > > contact@...
> > > http://www.bridechamber.com
> > > Jealous Edison Record Kompany
> > > http://www.jealousedison.com
> > >
> > >
> > > On Mar 16, 2009, at 3:15 PM, Ron Pool wrote:
> > >
> > > > I might be in for two Klee panels if panel
> parts are
> > > easy to source.
> > > > Where can I see what Thomas White's
> Klee layout
> > > looks like?
> > > >
> > > > On Mon, Mar 16, 2009 at 4:00 PM, Jason
> Proctor
> > > <jason@...> wrote:
> > > > > i think you should relate what
> happened with the
> > > first one :-)
> > > > >
> > > > >>I'm in for a Klee.
> > > > >>
> > > > >>Yes, building a second one :)
> > > > >>
> > > > >>Paul
> > > > >
> > > > >
> > > >
> > > > --
> > > > Ron Pool <amp1ron@...>
> > > >
> >
> >

--- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...> wrote:
>
> So the Klee and MFOS seq's are finally nearing their day. My conundrum:
> I don't want to order 50 expensive panels and sell 10. So...
> How many folks are in for these sequencers?
> They are Thomas White's great oval and circle designs. Thanks Thomas!
>
> Cheers,
> Scott Deyo
> The Bridechamber
> contact@...
> http://www.bridechamber.com
> Jealous Edison Record Kompany
> http://www.jealousedison.com
>

--- On Mon, 3/16/09, Scott Deyo <contact@...> wrote:

> From: Scott Deyo <contact@...>
> Subject: Re: [ModularSynthPanels] Klee and MFOS sequencer
> To: ModularSynthPanels@yahoogroups.com
> Date: Monday, March 16, 2009, 1:40 PM
> I'm thinking $80-$100.
> The FPE is nearly $300!!!!!!! There's a WTF for ya,
> huh?
>
> Scott Deyo
> The Bridechamber
> contact@...
> http://www.bridechamber.com
> Jealous Edison Record Kompany
> http://www.jealousedison.com
>
>
> On Mar 16, 2009, at 3:37 PM, loopcycle wrote:
>
> >
> > id like to see the final design too, and get a rough
> idea of the cost of the klee panel. i have a second kit
> sitting around and id prefer to have a nice panel for it.
> >
> > --- On Mon, 3/16/09, Scott Deyo
> <contact@...> wrote:
> >
> > > From: Scott Deyo
> <contact@...>
> > > Subject: Re: [ModularSynthPanels] Klee and MFOS
> sequencer
> > > To: ModularSynthPanels@yahoogroups.com
> > > Date: Monday, March 16, 2009, 1:26 PM
> > > I'll be posting the design this week,
> hopefully.
> > > Panel parts shouldn't be bad.
> > > Wiring... lots of fun!
> > >
> > > Scott Deyo
> > > The Bridechamber
> > > contact@...
> > > http://www.bridechamber.com
> > > Jealous Edison Record Kompany
> > > http://www.jealousedison.com
> > >
> > >
> > > On Mar 16, 2009, at 3:15 PM, Ron Pool wrote:
> > >
> > > > I might be in for two Klee panels if panel
> parts are
> > > easy to source.
> > > > Where can I see what Thomas White's
> Klee layout
> > > looks like?
> > > >
> > > > On Mon, Mar 16, 2009 at 4:00 PM, Jason
> Proctor
> > > <jason@...> wrote:
> > > > > i think you should relate what
> happened with the
> > > first one :-)
> > > > >
> > > > >>I'm in for a Klee.
> > > > >>
> > > > >>Yes, building a second one :)
> > > > >>
> > > > >>Paul
> > > > >
> > > > >
> > > >
> > > > --
> > > > Ron Pool <amp1ron@...>
> > > >
> >
> >

--- On Mon, 3/16/09, Scott Deyo <contact@...> wrote:

> From: Scott Deyo <contact@...>
> Subject: Re: [ModularSynthPanels] Klee and MFOS sequencer
> To: ModularSynthPanels@yahoogroups.com
> Date: Monday, March 16, 2009, 7:15 PM
> sure and sure.
>
> what is the diameter for those 16mm, anyway? if folks need
> bigger it would be easy to drill them bigger, eh?
>
> the jacks... i think most people would beat you for that
> one....
>
> Scott Deyo
> The Bridechamber
> contact@...
> http://www.bridechamber.com
> Jealous Edison Record Kompany
> http://www.jealousedison.com
>
>
> On Mar 16, 2009, at 4:34 PM, loopcycle wrote:
>
> > ok, looked quickly at the design and it looks
> badass. i would most likely pick up a panel.
> > one criticism though--if you're going to do the
> electro music dot com graphic, make sure it reads
> >
> > electro-music.com
> >
> > (INCLUDE THE HYPHEN because electromusic.com would be
> wrong.)
> >
> > i would like to put in a request for this panel design
> though. can the pot mounting holes be punched for the
> smaller 16mm alpha pots instead of the larger
> bourns/spectrol pots? should we poll the group to see
> who's using smaller alphas VS larger pots like the
> bourns?
> >
> >
> > ok, now here's a really stupid idea that i'd
> love: punch the jack mounting holes small to accommodate
> 3.5mm jacks. please dont beat me for suggesting it. (im
> doing more and more diy with mini jacks these days and
> scaling back my 1/4" collection.)
> >
> > hans
> >
> >
> >
> >
> >
> >
> > --- On Mon, 3/16/09, Paul Lord <plord@...>
> wrote:
> >> From: Paul Lord <plord@...>
> >> Subject: Re: [ModularSynthPanels] Klee and MFOS
> sequencer
> >> To: ModularSynthPanels@yahoogroups.com
> >> Date: Monday, March 16, 2009, 1:48 PM
> >>
> >>
> >> The Thomas White rotary design is in teh top level
> directory of the
> >> Files section for this group, and yes, the FPE is
> almost 3x what Scott
> >> is proposing. That leaves a lot of dosh for 38
> (?) super high end
> >> switches.
> >>
> >> Paul
> >>
> >> On Mon, Mar 16, 2009 at 1:40 PM, Scott Deyo
> <contact@bridechambe r.com> wrote:
> >> > I'm thinking $80-$100.
> >> > The FPE is nearly $300!!!!!!! There's a
> WTF for ya, huh?
> >> >
> >> > Scott Deyo
> >> > The Bridechamber
> >> > contact@bridechambe r.com
> >> > http://www.bridecha mber.com
> >> > Jealous Edison Record Kompany
> >> > http://www.jealouse dison.com
> >> >
> >> >
> >> > On Mar 16, 2009, at 3:37 PM, loopcycle
> wrote:
> >> >
> >> >>
> >> >> id like to see the final design too,
> and get a rough idea of the cost of
> >> >> the klee panel. i have a second kit
> sitting around and id prefer to have a
> >> >> nice panel for it.
> >> >>
> >> >> --- On Mon, 3/16/09, Scott Deyo
> <contact@bridechambe r.com> wrote:
> >> >>
> >> >> > From: Scott Deyo
> <contact@bridechambe r.com>
> >> >> > Subject: Re: [ModularSynthPanels
> ] Klee and MFOS sequencer
> >> >> > To: ModularSynthPanels@
> yahoogroups. com
> >> >> > Date: Monday, March 16, 2009,
> 1:26 PM
> >> >> > I'll be posting the design
> this week, hopefully.
> >> >> > Panel parts shouldn't be bad.
> >> >> > Wiring... lots of fun!
> >> >> >
> >> >> > Scott Deyo
> >> >> > The Bridechamber
> >> >> > contact@bridechambe r.com
> >> >> > http://www.bridecha mber.com
> >> >> > Jealous Edison Record Kompany
> >> >> > http://www.jealouse dison.com
> >> >> >
> >> >> >
> >> >> > On Mar 16, 2009, at 3:15 PM, Ron
> Pool wrote:
> >> >> >
> >> >> > > I might be in for two Klee
> panels if panel parts are
> >> >> > easy to source.
> >> >> > > Where can I see what Thomas
> White's Klee layout
> >> >> > looks like?
> >> >> > >
> >> >> > > On Mon, Mar 16, 2009 at 4:00
> PM, Jason Proctor
> >> >> > <jason@redfish. net> wrote:
> >> >> > > > i think you should
> relate what happened with the
> >> >> > first one :-)
> >> >> > > >
> >> >> > > >>I'm in for a
> Klee.
> >> >> > > >>
> >> >> > > >>Yes, building a
> second one :)
> >> >> > > >>
> >> >> > > >>Paul
> >> >> > > >
> >> >> > > >
> >> >> > >
> >> >> > > --
> >> >> > > Ron Pool <amp1ron@gmail.
> com>
> >> >> > >
> >> >>
> >> >>
> >> >
> >
> >

On Tue, Mar 17, 2009 at 1:20 AM, thomas white <djthomaswhite@...> wrote:

The KLEE is almost a full-rack width (19") wide, not quite, but close. A big panel, a legendary sequencer, and I see fit to spend a bit on the panel to have it sit in high fashion like the king it is.

Thomas White Natural Rhythm
www.naturalrhythmmusic.com

--- On Mon, 3/16/09, Scott Deyo <contact@...> wrote:

> From: Scott Deyo <contact@...>
> Subject: Re: [ModularSynthPanels] Klee and MFOS sequencer
> To: ModularSynthPanels@yahoogroups.com

> Date: Monday, March 16, 2009, 1:40 PM

> I'm thinking $80-$100.
> The FPE is nearly $300!!!!!!! There's a WTF for ya,
> huh?
>
> Scott Deyo
> The Bridechamber
> contact@...
> http://www.bridechamber.com
> Jealous Edison Record Kompany
> http://www.jealousedison.com
>
>
> On Mar 16, 2009, at 3:37 PM, loopcycle wrote:
>
> >
> > id like to see the final design too, and get a rough
> idea of the cost of the klee panel. i have a second kit
> sitting around and id prefer to have a nice panel for it.
> >
> > --- On Mon, 3/16/09, Scott Deyo
> <contact@...> wrote:
> >
> > > From: Scott Deyo
> <contact@...>
> > > Subject: Re: [ModularSynthPanels] Klee and MFOS
> sequencer
> > > To: ModularSynthPanels@yahoogroups.com
> > > Date: Monday, March 16, 2009, 1:26 PM
> > > I'll be posting the design this week,
> hopefully.
> > > Panel parts shouldn't be bad.
> > > Wiring... lots of fun!
> > >
> > > Scott Deyo
> > > The Bridechamber
> > > contact@...
> > > http://www.bridechamber.com
> > > Jealous Edison Record Kompany
> > > http://www.jealousedison.com
> > >
> > >
> > > On Mar 16, 2009, at 3:15 PM, Ron Pool wrote:
> > >
> > > > I might be in for two Klee panels if panel
> parts are
> > > easy to source.
> > > > Where can I see what Thomas White's
> Klee layout
> > > looks like?
> > > >
> > > > On Mon, Mar 16, 2009 at 4:00 PM, Jason
> Proctor
> > > <jason@...> wrote:
> > > > > i think you should relate what
> happened with the
> > > first one :-)
> > > > >
> > > > >>I'm in for a Klee.
> > > > >>
> > > > >>Yes, building a second one :)
> > > > >>
> > > > >>Paul
> > > > >
> > > > >
> > > >
> > > > --
> > > > Ron Pool <amp1ron@...>
> > > >
> >
> >

--- On Mon, 3/16/09, Andrew Listmayer <andrewlistmayer@...> wrote:

From: Andrew Listmayer <andrewlistmayer@...>
Subject: Re: [ModularSynthPanels] Klee and MFOS sequencer
To: ModularSynthPanels@yahoogroups.com
Date: Monday, March 16, 2009, 10:50 PM

Seriously? I thought it was going to be 7U wide. I might have to back out, or at least think hard about it first.

On Tue, Mar 17, 2009 at 1:20 AM, thomas white <djthomaswhite@ yahoo.com> wrote:

The KLEE is almost a full-rack width (19") wide, not quite, but close. A big panel, a legendary sequencer, and I see fit to spend a bit on the panel to have it sit in high fashion like the king it is.

Thomas White Natural Rhythm
www.naturalrhythmmu sic.com

--- On Mon, 3/16/09, Scott Deyo <contact@bridechambe r.com> wrote:

> From: Scott Deyo <contact@bridechambe r.com>
> Subject: Re: [ModularSynthPanels ] Klee and MFOS sequencer
> To: ModularSynthPanels@ yahoogroups. com

> Date: Monday, March 16, 2009, 1:40 PM

> I'm thinking $80-$100.
> The FPE is nearly $300!!!!!!! There's a WTF for ya,
> huh?
>
> Scott Deyo
> The Bridechamber
> contact@bridechambe r.com
> http://www.bridecha mber.com
> Jealous Edison Record Kompany
> http://www.jealouse dison.com
>
>
> On Mar 16, 2009, at 3:37 PM, loopcycle wrote:
>
> >
> > id like to see the final design too, and get a rough
> idea of the cost of the klee panel. i have a second kit
> sitting around and id prefer to have a nice panel for it.
> >
> > --- On Mon, 3/16/09, Scott Deyo
> <contact@bridechambe r.com> wrote:
> >
> > > From: Scott Deyo
> <contact@bridechambe r.com>
> > > Subject: Re: [ModularSynthPanels ] Klee and MFOS
> sequencer
> > > To: ModularSynthPanels@ yahoogroups. com
> > > Date: Monday, March 16, 2009, 1:26 PM
> > > I'll be posting the design this week,
> hopefully.
> > > Panel parts shouldn't be bad.
> > > Wiring... lots of fun!
> > >
> > > Scott Deyo
> > > The Bridechamber
> > > contact@bridechambe r.com
> > > http://www.bridecha mber.com
> > > Jealous Edison Record Kompany
> > > http://www.jealouse dison.com
> > >
> > >
> > > On Mar 16, 2009, at 3:15 PM, Ron Pool wrote:
> > >
> > > > I might be in for two Klee panels if panel
> parts are
> > > easy to source.
> > > > Where can I see what Thomas White's
> Klee layout
> > > looks like?
> > > >
> > > > On Mon, Mar 16, 2009 at 4:00 PM, Jason
> Proctor
> > > <jason@redfish. net> wrote:
> > > > > i think you should relate what
> happened with the
> > > first one :-)
> > > > >
> > > > >>I'm in for a Klee.
> > > > >>
> > > > >>Yes, building a second one :)
> > > > >>
> > > > >>Paul
> > > > >
> > > > >
> > > >
> > > > --
> > > > Ron Pool <amp1ron@gmail. com>
> > > >
> >
> >

--- On Mon, 3/16/09, loopcycle <loopcycle@...> wrote:

From: loopcycle <loopcycle@...>
Subject: Re: [ModularSynthPanels] Klee and MFOS sequencer
To: ModularSynthPanels@yahoogroups.com
Date: Monday, March 16, 2009, 10:44 PM

ok, lets just say i was kidding about the 3.5mm jacks and skip the beatings ;)

i just measured my alpha pot with my handy-dandy digital caliper...im measuring

6.85mm

(rounded up to the nearest 0.05mm diameter across the threaded part of the shaft=thicker than the smooth part.) opening the calipers to 7.0mm gives just a tiny bit of play and would probably be a 'safe' bet.

it would really be nice to have the right hole size punched for the circular design so it looks good assembled (it can be a merry bitch to get those pots somewhat centered while swimming around in a big hole).

oh, im referring to the klee panel since i have a full kit waiting for it.

and really, i wont be too picky however the panel comes out. and i have a unibit for boring out holes so no biggie if a hole is small for the part i want to use.

--- On Mon, 3/16/09, Scott Deyo <contact@bridechambe r.com> wrote:

> From: Scott Deyo <contact@bridechambe r.com>
> Subject: Re: [ModularSynthPanels ] Klee and MFOS sequencer
> To: ModularSynthPanels@ yahoogroups. com
> Date: Monday, March 16, 2009, 7:15 PM
> sure and sure.
>
> what is the diameter for those 16mm, anyway? if folks need
> bigger it would be easy to drill them bigger, eh?
>
> the jacks... i think most people would beat you for that
> one....
>
> Scott Deyo
> The Bridechamber
> contact@bridechambe r.com
> http://www.bridecha mber.com
> Jealous Edison Record Kompany
> http://www.jealouse dison.com
>
>
> On Mar 16, 2009, at 4:34 PM, loopcycle wrote:
>
> > ok, looked quickly at the design and it looks
> badass. i would most likely pick up a panel.
> > one criticism though--if you're going to do the
> electro music dot com graphic, make sure it reads
> >
> > electro-music. com
> >
> > (INCLUDE THE HYPHEN because electromusic. com would be
> wrong.)
> >
> > i would like to put in a request for this panel design
> though. can the pot mounting holes be punched for the
> smaller 16mm alpha pots instead of the larger
> bourns/spectrol pots? should we poll the group to see
> who's using smaller alphas VS larger pots like the
> bourns?
> >
> >
> > ok, now here's a really stupid idea that i'd
> love: punch the jack mounting holes small to accommodate
> 3.5mm jacks. please dont beat me for suggesting it. (im
> doing more and more diy with mini jacks these days and
> scaling back my 1/4" collection.)
> >
> > hans
> >
> >
> >
> >
> >
> >
> > --- On Mon, 3/16/09, Paul Lord <plord@there. org>
> wrote:
> >> From: Paul Lord <plord@there. org>
> >> Subject: Re: [ModularSynthPanels ] Klee and MFOS
> sequencer
> >> To: ModularSynthPanels@ yahoogroups. com
> >> Date: Monday, March 16, 2009, 1:48 PM
> >>
> >>
> >> The Thomas White rotary design is in teh top level
> directory of the
> >> Files section for this group, and yes, the FPE is
> almost 3x what Scott
> >> is proposing. That leaves a lot of dosh for 38
> (?) super high end
> >> switches.
> >>
> >> Paul
> >>
> >> On Mon, Mar 16, 2009 at 1:40 PM, Scott Deyo
> <contact@bridechamb e r.com> wrote:
> >> > I'm thinking $80-$100.
> >> > The FPE is nearly $300!!!!!!! There's a
> WTF for ya, huh?
> >> >
> >> > Scott Deyo
> >> > The Bridechamber
> >> > contact@bridechambe r.com
> >> > http://www.bridecha mber.com
> >> > Jealous Edison Record Kompany
> >> > http://www.jealouse dison.com
> >> >
> >> >
> >> > On Mar 16, 2009, at 3:37 PM, loopcycle
> wrote:
> >> >
> >> >>
> >> >> id like to see the final design too,
> and get a rough idea of the cost of
> >> >> the klee panel. i have a second kit
> sitting around and id prefer to have a
> >> >> nice panel for it.
> >> >>
> >> >> --- On Mon, 3/16/09, Scott Deyo
> <contact@bridechamb e r.com> wrote:
> >> >>
> >> >> > From: Scott Deyo
> <contact@bridechamb e r.com>
> >> >> > Subject: Re: [ModularSynthPanels
> ] Klee and MFOS sequencer
> >> >> > To: ModularSynthPanels@
> yahoogroups. com
> >> >> > Date: Monday, March 16, 2009,
> 1:26 PM
> >> >> > I'll be posting the design
> this week, hopefully.
> >> >> > Panel parts shouldn't be bad.
> >> >> > Wiring... lots of fun!
> >> >> >
> >> >> > Scott Deyo
> >> >> > The Bridechamber
> >> >> > contact@bridechambe r.com
> >> >> > http://www.bridecha mber.com
> >> >> > Jealous Edison Record Kompany
> >> >> > http://www.jealouse dison.com
> >> >> >
> >> >> >
> >> >> > On Mar 16, 2009, at 3:15 PM, Ron
> Pool wrote:
> >> >> >
> >> >> > > I might be in for two Klee
> panels if panel parts are
> >> >> > easy to source.
> >> >> > > Where can I see what Thomas
> White's Klee layout
> >> >> > looks like?
> >> >> > >
> >> >> > > On Mon, Mar 16, 2009 at 4:00
> PM, Jason Proctor
> >> >> > <jason@redfish. net> wrote:
> >> >> > > > i think you should
> relate what happened with the
> >> >> > first one :-)
> >> >> > > >
> >> >> > > >>I'm in for a
> Klee.
> >> >> > > >>
> >> >> > > >>Yes, building a
> second one :)
> >> >> > > >>
> >> >> > > >>Paul
> >> >> > > >
> >> >> > > >
> >> >> > >
> >> >> > > --
> >> >> > > Ron Pool <amp1ron@gmail.
> com>
> >> >> > >
> >> >>
> >> >>
> >> >
> >
> >

--- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...> wrote:
>
> So the Klee and MFOS seq's are finally nearing their day. My conundrum:
> I don't want to order 50 expensive panels and sell 10. So...
> How many folks are in for these sequencers?
> They are Thomas White's great oval and circle designs. Thanks Thomas!
>
> Cheers,
> Scott Deyo
> The Bridechamber
> contact@...
> http://www.bridechamber.com
> Jealous Edison Record Kompany
> http://www.jealousedison.com
>

On Mar 17, 2009, at 12:07 AM, thomas white wrote:

>
> Sounds exciting. The day is finally near. Let's see it (or them)!
>
> Thomas White Natural Rhythm
> www.naturalrhythmmusic.com
>
> --- On Mon, 3/16/09, Scott Deyo <contact@...> wrote:
>
> > From: Scott Deyo <contact@...>
> > Subject: Re: [ModularSynthPanels] Klee and MFOS sequencer
> > To: ModularSynthPanels@yahoogroups.com
> > Date: Monday, March 16, 2009, 9:11 PM
> > oh, no, i don't think so yet. i have one 98% done if
> > Thomas doesn't hate my (necessary, i swear) changes, and
> > if OK'd i'll post it on the site and/ or group.
> >
> > Scott Deyo
> > The Bridechamber
> > contact@...
> > http://www.bridechamber.com
> > Jealous Edison Record Kompany
> > http://www.jealousedison.com
> >
> >
> > On Mar 16, 2009, at 10:59 PM, Scott Juskiw wrote:
> >
> > > Oops, I meant is there an image of the Klee panel
> > somewhere?
> > >
> > > >
> > > > http://www.naturalrhythmmusic.com/mfos.html
> > > >
> > > > at the bottom
> > > >
> > >
>
>

--- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...> wrote:
>
> So the Klee and MFOS seq's are finally nearing their day. My conundrum:
> I don't want to order 50 expensive panels and sell 10. So...
> How many folks are in for these sequencers?
> They are Thomas White's great oval and circle designs. Thanks Thomas!
>
> Cheers,
> Scott Deyo
> The Bridechamber
> contact@...
> http://www.bridechamber.com
> Jealous Edison Record Kompany
> http://www.jealousedison.com
>

--- In ModularSynthPanels@yahoogroups.com, "data2action" <fluxmonk@...> wrote:
>
> one of each for me. and another vote for smaller holes... easier to drill out a hole that's too small than it is to shrink one that's too big.
>
> b
>
>
> --- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@> wrote:
> >
> > So the Klee and MFOS seq's are finally nearing their day. My conundrum:
> > I don't want to order 50 expensive panels and sell 10. So...
> > How many folks are in for these sequencers?
> > They are Thomas White's great oval and circle designs. Thanks Thomas!
> >
> > Cheers,
> > Scott Deyo
> > The Bridechamber
> > contact@
> > http://www.bridechamber.com
> > Jealous Edison Record Kompany
> > http://www.jealousedison.com
> >
>

--- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...> wrote:
>
> So the Klee and MFOS seq's are finally nearing their day. My conundrum:
> I don't want to order 50 expensive panels and sell 10. So...
> How many folks are in for these sequencers?
> They are Thomas White's great oval and circle designs. Thanks Thomas!
>
> Cheers,
> Scott Deyo
> The Bridechamber
> contact@...
> http://www.bridechamber.com
> Jealous Edison Record Kompany
> http://www.jealousedison.com
>

--- On Mon, 3/16/09, Scott Deyo <contact@...> wrote:

From: Scott Deyo <contact@...>
Subject: [ModularSynthPanels] Klee and MFOS sequencer
To: ModularSynthPanels@yahoogroups.com
Date: Monday, March 16, 2009, 11:58 AM

So the Klee and MFOS seq's are finally nearing their day. My conundrum:
I don't want to order 50 expensive panels and sell 10. So...
How many folks are in for these sequencers?
They are Thomas White's great oval and circle designs. Thanks Thomas!

Cheers,
Scott Deyo
The Bridechamber
contact@bridechambe r.com
http://www.bridecha mber.com
Jealous Edison Record Kompany
http://www.jealouse dison.com

On Mar 17, 2009, at 2:16 AM, krelnarb wrote:

> Off topic, but if you need a show of hands for a panel count I'll be
> getting a CVS panel also.
>
> --- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...>
> wrote:
> >
> > So the Klee and MFOS seq's are finally nearing their day. My
> conundrum:
> > I don't want to order 50 expensive panels and sell 10. So...
> > How many folks are in for these sequencers?
> > They are Thomas White's great oval and circle designs. Thanks
> Thomas!
> >
> > Cheers,
> > Scott Deyo
> > The Bridechamber
> > contact@...
> > http://www.bridechamber.com
> > Jealous Edison Record Kompany
> > http://www.jealousedison.com
> >
>
>

--- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...> wrote:
>
> I'm trying to get the CVS in on this run, too, but it may take 'til the
> next run, which will be happening very soon. I really really really
> want to catch up this year, before everyone comes up w/ too many more
> new designs!
>
> Scott Deyo
> The Bridechamber
> contact@...
> http://www.bridechamber.com
> Jealous Edison Record Kompany
> http://www.jealousedison.com
>
>
> On Mar 17, 2009, at 2:16 AM, krelnarb wrote:
>
> > Off topic, but if you need a show of hands for a panel count I'll be
> > getting a CVS panel also.
> >
> > --- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@>
> > wrote:
> > >
> > > So the Klee and MFOS seq's are finally nearing their day. My
> > conundrum:
> > > I don't want to order 50 expensive panels and sell 10. So...
> > > How many folks are in for these sequencers?
> > > They are Thomas White's great oval and circle designs. Thanks
> > Thomas!
> > >
> > > Cheers,
> > > Scott Deyo
> > > The Bridechamber
> > > contact@
> > > http://www.bridechamber.com
> > > Jealous Edison Record Kompany
> > > http://www.jealousedison.com
> > >
> >
> >
>

On Mar 18, 2009, at 12:05 PM, Dave wrote:

> Hey Scott,
>
> I'm definately in for a Klee panel!! I would also like to get a CGS
> Prog/sequencer panel when you get that, when do you think that will
> happen?
>
> Thanks,
> Dave
>
> --- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...>
> wrote:
> >
> > I'm trying to get the CVS in on this run, too, but it may take 'til
> the
> > next run, which will be happening very soon. I really really really
> > want to catch up this year, before everyone comes up w/ too many
> more
> > new designs!
> >
> > Scott Deyo
> > The Bridechamber
> > contact@...
> > http://www.bridechamber.com
> > Jealous Edison Record Kompany
> > http://www.jealousedison.com
> >
> >
> > On Mar 17, 2009, at 2:16 AM, krelnarb wrote:
> >
> > > Off topic, but if you need a show of hands for a panel count I'll
> be
> > > getting a CVS panel also.
> > >
> > > --- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@>
> > > wrote:
> > > >
> > > > So the Klee and MFOS seq's are finally nearing their day. My
> > > conundrum:
> > > > I don't want to order 50 expensive panels and sell 10. So...
> > > > How many folks are in for these sequencers?
> > > > They are Thomas White's great oval and circle designs. Thanks
> > > Thomas!
> > > >
> > > > Cheers,
> > > > Scott Deyo
> > > > The Bridechamber
> > > > contact@
> > > > http://www.bridechamber.com
> > > > Jealous Edison Record Kompany
> > > > http://www.jealousedison.com
> > > >
> > >
> > >
> >
>
>

> >
> > Scott Deyo
> > The Bridechamber
> > contact@
> > http://www.bridechamber.com
> > Jealous Edison Record Kompany
> > http://www.jealousedison.com
> >
> >
> > On Mar 17, 2009, at 2:16 AM, krelnarb wrote:
> >
> > > Off topic, but if you need a show of hands for a panel count I'll be
> > > getting a CVS panel also.
> > >
> > > --- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@>
> > > wrote:
> > > >
> > > > So the Klee and MFOS seq's are finally nearing their day. My
> > > conundrum:
> > > > I don't want to order 50 expensive panels and sell 10. So...
> > > > How many folks are in for these sequencers?
> > > > They are Thomas White's great oval and circle designs. Thanks
> > > Thomas!
> > > >
> > > > Cheers,
> > > > Scott Deyo
> > > > The Bridechamber
> > > > contact@
> > > > http://www.bridechamber.com
> > > > Jealous Edison Record Kompany
> > > > http://www.jealousedison.com
> > > >
> > >
> > >
> >
>

--- In ModularSynthPanels@yahoogroups.com, Bill Ganger <billg99@...> wrote:
>
> I'm in for a Klee panel.  I would prefer the holes for the small Alpha pots and 3.5 mm jacks.
>
> Bill Ganger
>
> --- On Mon, 3/16/09, Scott Deyo <contact@...> wrote:
> From: Scott Deyo <contact@...>
> Subject: [ModularSynthPanels] Klee and MFOS sequencer
> To: ModularSynthPanels@yahoogroups.com
> Date: Monday, March 16, 2009, 11:58 AM
>
>
>
>
>
>
>
>
>
>
>
>
> So the Klee and MFOS seq's are finally nearing their day. My conundrum:
>
> I don't want to order 50 expensive panels and sell 10. So...
>
> How many folks are in for these sequencers?
>
> They are Thomas White's great oval and circle designs. Thanks Thomas!
>
>
>
> Cheers,
>
> Scott Deyo
>
> The Bridechamber
>
> contact@bridechambe r.com
>
> http://www.bridecha mber.com
>
> Jealous Edison Record Kompany
>
> http://www.jealouse dison.com
>

On Mar 18, 2009, at 12:38 PM, loss1234 wrote:

> how much are the panels for the klee? definitely interested
>
> thanks
> > >
> > > Scott Deyo
> > > The Bridechamber
> > > contact@
> > > http://www.bridechamber.com
> > > Jealous Edison Record Kompany
> > > http://www.jealousedison.com
> > >
> > >
> > > On Mar 17, 2009, at 2:16 AM, krelnarb wrote:
> > >
> > > > Off topic, but if you need a show of hands for a panel count
> I'll be
> > > > getting a CVS panel also.
> > > >
> > > > --- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@>
> > > > wrote:
> > > > >
> > > > > So the Klee and MFOS seq's are finally nearing their day. My
> > > > conundrum:
> > > > > I don't want to order 50 expensive panels and sell 10. So...
> > > > > How many folks are in for these sequencers?
> > > > > They are Thomas White's great oval and circle designs. Thanks
> > > > Thomas!
> > > > >
> > > > > Cheers,
> > > > > Scott Deyo
> > > > > The Bridechamber
> > > > > contact@
> > > > > http://www.bridechamber.com
> > > > > Jealous Edison Record Kompany
> > > > > http://www.jealousedison.com
> > > > >
> > > >
> > > >
> > >
> >
>
>

> I'm thinking probably $100, around $180 _less_ than FPE!

--- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...> wrote:
>
> I'm thinking probably $100, around $180 _less_ than FPE!
>
> Scott Deyo
> The Bridechamber
> contact@...
> http://www.bridechamber.com
> Jealous Edison Record Kompany
> http://www.jealousedison.com
>
>
> On Mar 18, 2009, at 12:38 PM, loss1234 wrote:
>
> > how much are the panels for the klee? definitely interested
> >
> > thanks
> > > >
> > > > Scott Deyo
> > > > The Bridechamber
> > > > contact@
> > > > http://www.bridechamber.com
> > > > Jealous Edison Record Kompany
> > > > http://www.jealousedison.com
> > > >
> > > >
> > > > On Mar 17, 2009, at 2:16 AM, krelnarb wrote:
> > > >
> > > > > Off topic, but if you need a show of hands for a panel count
> > I'll be
> > > > > getting a CVS panel also.
> > > > >
> > > > > --- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@>
> > > > > wrote:
> > > > > >
> > > > > > So the Klee and MFOS seq's are finally nearing their day. My
> > > > > conundrum:
> > > > > > I don't want to order 50 expensive panels and sell 10. So...
> > > > > > How many folks are in for these sequencers?
> > > > > > They are Thomas White's great oval and circle designs. Thanks
> > > > > Thomas!
> > > > > >
> > > > > > Cheers,
> > > > > > Scott Deyo
> > > > > > The Bridechamber
> > > > > > contact@
> > > > > > http://www.bridechamber.com
> > > > > > Jealous Edison Record Kompany
> > > > > > http://www.jealousedison.com
> > > > > >
> > > > >
> > > > >
> > > >
> > >
> >
> >
>

--- In ModularSynthPanels@yahoogroups.com, "Dave" <lexvortex@...> wrote:
>
> Hi Scott,
>
> I noticed in Thomas's oval design he left out the gate bus 1 to load switch (a standard option in the design), will you be including this in your design, I hope so :)
>
> Thanks,
> Dave
>
> --- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@> wrote:
> >
> > I'm thinking probably $100, around $180 _less_ than FPE!
> >
> > Scott Deyo
> > The Bridechamber
> > contact@
> > http://www.bridechamber.com
> > Jealous Edison Record Kompany
> > http://www.jealousedison.com
> >
> >
> > On Mar 18, 2009, at 12:38 PM, loss1234 wrote:
> >
> > > how much are the panels for the klee? definitely interested
> > >
> > > thanks
> > > > >
> > > > > Scott Deyo
> > > > > The Bridechamber
> > > > > contact@
> > > > > http://www.bridechamber.com
> > > > > Jealous Edison Record Kompany
> > > > > http://www.jealousedison.com
> > > > >
> > > > >
> > > > > On Mar 17, 2009, at 2:16 AM, krelnarb wrote:
> > > > >
> > > > > > Off topic, but if you need a show of hands for a panel count
> > > I'll be
> > > > > > getting a CVS panel also.
> > > > > >
> > > > > > --- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@>
> > > > > > wrote:
> > > > > > >
> > > > > > > So the Klee and MFOS seq's are finally nearing their day. My
> > > > > > conundrum:
> > > > > > > I don't want to order 50 expensive panels and sell 10. So...
> > > > > > > How many folks are in for these sequencers?
> > > > > > > They are Thomas White's great oval and circle designs. Thanks
> > > > > > Thomas!
> > > > > > >
> > > > > > > Cheers,
> > > > > > > Scott Deyo
> > > > > > > The Bridechamber
> > > > > > > contact@
> > > > > > > http://www.bridechamber.com
> > > > > > > Jealous Edison Record Kompany
> > > > > > > http://www.jealousedison.com
> > > > > > >
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> > >
> >
>

--- In ModularSynthPanels@yahoogroups.com, "loopcycle" <loopcycle@...> wrote:
>
> Hi Dave,
>
> I'm glad you are double checking the design. I think Thomas placed the bus 1 load switch next to the main CV output on the right side (the momentary switches are the large holes).
>
> Thomas or Scott--what part number are the momentary switch holes designed for? I know we are getting about a 50/50% response on the "bore your own holes out" poll in the group here, but Bill/Will bring a good point because the size of those switch holes will force builders to choose certain hardware that may/may not be easily available.
>
> Hans
>
>
>
> --- In ModularSynthPanels@yahoogroups.com, "Dave" <lexvortex@> wrote:
> >
> > Hi Scott,
> >
> > I noticed in Thomas's oval design he left out the gate bus 1 to load switch (a standard option in the design), will you be including this in your design, I hope so :)
> >
> > Thanks,
> > Dave
> >
> > --- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@> wrote:
> > >
> > > I'm thinking probably $100, around $180 _less_ than FPE!
> > >
> > > Scott Deyo
> > > The Bridechamber
> > > contact@
> > > http://www.bridechamber.com
> > > Jealous Edison Record Kompany
> > > http://www.jealousedison.com
> > >
> > >
> > > On Mar 18, 2009, at 12:38 PM, loss1234 wrote:
> > >
> > > > how much are the panels for the klee? definitely interested
> > > >
> > > > thanks
> > > > > >
> > > > > > Scott Deyo
> > > > > > The Bridechamber
> > > > > > contact@
> > > > > > http://www.bridechamber.com
> > > > > > Jealous Edison Record Kompany
> > > > > > http://www.jealousedison.com
> > > > > >
> > > > > >
> > > > > > On Mar 17, 2009, at 2:16 AM, krelnarb wrote:
> > > > > >
> > > > > > > Off topic, but if you need a show of hands for a panel count
> > > > I'll be
> > > > > > > getting a CVS panel also.
> > > > > > >
> > > > > > > --- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@>
> > > > > > > wrote:
> > > > > > > >
> > > > > > > > So the Klee and MFOS seq's are finally nearing their day. My
> > > > > > > conundrum:
> > > > > > > > I don't want to order 50 expensive panels and sell 10. So...
> > > > > > > > How many folks are in for these sequencers?
> > > > > > > > They are Thomas White's great oval and circle designs. Thanks
> > > > > > > Thomas!
> > > > > > > >
> > > > > > > > Cheers,
> > > > > > > > Scott Deyo
> > > > > > > > The Bridechamber
> > > > > > > > contact@
> > > > > > > > http://www.bridechamber.com
> > > > > > > > Jealous Edison Record Kompany
> > > > > > > > http://www.jealousedison.com
> > > > > > > >
> > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > > >
> > >
> >
>

On Mar 18, 2009, at 6:08 PM, Dave wrote:

> Hi Scott,
>
> I noticed in Thomas's oval design he left out the gate bus 1 to load
> switch (a standard option in the design), will you be including this
> in your design, I hope so :)
>
> Thanks,
> Dave
>
> --- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...>
> wrote:
> >
> > I'm thinking probably $100, around $180 _less_ than FPE!
> >
> > Scott Deyo
> > The Bridechamber
> > contact@...
> > http://www.bridechamber.com
> > Jealous Edison Record Kompany
> > http://www.jealousedison.com
> >
> >
> > On Mar 18, 2009, at 12:38 PM, loss1234 wrote:
> >
> > > how much are the panels for the klee? definitely interested
> > >
> > > thanks
> > > > >
> > > > > Scott Deyo
> > > > > The Bridechamber
> > > > > contact@
> > > > > http://www.bridechamber.com
> > > > > Jealous Edison Record Kompany
> > > > > http://www.jealousedison.com
> > > > >
> > > > >
> > > > > On Mar 17, 2009, at 2:16 AM, krelnarb wrote:
> > > > >
> > > > > > Off topic, but if you need a show of hands for a panel count
> > > I'll be
> > > > > > getting a CVS panel also.
> > > > > >
> > > > > > --- In ModularSynthPanels@yahoogroups.com, Scott Deyo
> <contact@>
> > > > > > wrote:
> > > > > > >
> > > > > > > So the Klee and MFOS seq's are finally nearing their day.
> My
> > > > > > conundrum:
> > > > > > > I don't want to order 50 expensive panels and sell 10.
> So...
> > > > > > > How many folks are in for these sequencers?
> > > > > > > They are Thomas White's great oval and circle designs.
> Thanks
> > > > > > Thomas!
> > > > > > >
> > > > > > > Cheers,
> > > > > > > Scott Deyo
> > > > > > > The Bridechamber
> > > > > > > contact@
> > > > > > > http://www.bridechamber.com
> > > > > > > Jealous Edison Record Kompany
> > > > > > > http://www.jealousedison.com
> > > > > > >
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> > >
> >
>
>

On Mar 18, 2009, at 6:28 PM, loopcycle wrote:

> Hi Dave,
>
> I'm glad you are double checking the design. I think Thomas placed
> the bus 1 load switch next to the main CV output on the right side
> (the momentary switches are the large holes).
>
> Thomas or Scott--what part number are the momentary switch holes
> designed for? I know we are getting about a 50/50% response on the
> "bore your own holes out" poll in the group here, but Bill/Will bring
> a good point because the size of those switch holes will force
> builders to choose certain hardware that may/may not be easily
> available.
>
> Hans
>
> --- In ModularSynthPanels@yahoogroups.com, "Dave" <lexvortex@...>
> wrote:
> >
> > Hi Scott,
> >
> > I noticed in Thomas's oval design he left out the gate bus 1 to
> load switch (a standard option in the design), will you be including
> this in your design, I hope so :)
> >
> > Thanks,
> > Dave
> >
> > --- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@>
> wrote:
> > >
> > > I'm thinking probably $100, around $180 _less_ than FPE!
> > >
> > > Scott Deyo
> > > The Bridechamber
> > > contact@
> > > http://www.bridechamber.com
> > > Jealous Edison Record Kompany
> > > http://www.jealousedison.com
> > >
> > >
> > > On Mar 18, 2009, at 12:38 PM, loss1234 wrote:
> > >
> > > > how much are the panels for the klee? definitely interested
> > > >
> > > > thanks
> > > > > >
> > > > > > Scott Deyo
> > > > > > The Bridechamber
> > > > > > contact@
> > > > > > http://www.bridechamber.com
> > > > > > Jealous Edison Record Kompany
> > > > > > http://www.jealousedison.com
> > > > > >
> > > > > >
> > > > > > On Mar 17, 2009, at 2:16 AM, krelnarb wrote:
> > > > > >
> > > > > > > Off topic, but if you need a show of hands for a panel
> count
> > > > I'll be
> > > > > > > getting a CVS panel also.
> > > > > > >
> > > > > > > --- In ModularSynthPanels@yahoogroups.com, Scott Deyo
> <contact@>
> > > > > > > wrote:
> > > > > > > >
> > > > > > > > So the Klee and MFOS seq's are finally nearing their
> day. My
> > > > > > > conundrum:
> > > > > > > > I don't want to order 50 expensive panels and sell 10.
> So...
> > > > > > > > How many folks are in for these sequencers?
> > > > > > > > They are Thomas White's great oval and circle designs.
> Thanks
> > > > > > > Thomas!
> > > > > > > >
> > > > > > > > Cheers,
> > > > > > > > Scott Deyo
> > > > > > > > The Bridechamber
> > > > > > > > contact@
> > > > > > > > http://www.bridechamber.com
> > > > > > > > Jealous Edison Record Kompany
> > > > > > > > http://www.jealousedison.com
> > > > > > > >
> > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > > >
> > >
> >
>
>

On Mar 18, 2009, at 3:13 PM, Samppa Tolvanen wrote:

> SynthModularMexicanPanel Provides You with The Cheapest sheet metal!
>

On Thu, Mar 19, 2009 at 5:50 AM, loss1234 <subjectivity@...> wrote:

IF more people who use 3.5 mm (a ton of people i know use that standard) thought bridechamber sold panels in 3.5 mm, you might get more votes.

I had always thought bridechamber only did MOTM panels so i have never purchased one before.

thanks!

--
---------------------
http://www.kwotemusic.com
http://www.kwotemusic.com/store.html

On Mar 19, 2009, at 7:50 AM, loss1234 wrote:

> IF more people who use 3.5 mm (a ton of people i know use that
> standard) thought bridechamber sold panels in 3.5 mm, you might get
> more votes.
>
> I had always thought bridechamber only did MOTM panels so i have
> never purchased one before.
>
> thanks!
>
>

On Thu, Mar 19, 2009 at 8:07 AM, Scott Deyo <contact@...> wrote:

I've wanted to get into Frac, but I can't do CGS or Fritz (Elby and Metalbox have dibs) and have enough trouble keeping up w/ MOTM. I _want_ to, but it may take too long.

Scott Deyo
The Bridechamber
contact@...
http://www.bridechamber.com
Jealous Edison Record Kompany
http://www.jealousedison.com

On Mar 19, 2009, at 7:50 AM, loss1234 wrote:

 IF more people who use 3.5 mm (a ton of people i know use that standard) thought bridechamber sold panels in 3.5 mm, you might get more votes.

 I had always thought bridechamber only did MOTM panels so i have never purchased one before.

 thanks!

--
---------------------
http://www.kwotemusic.com
http://www.kwotemusic.com/store.html

On Mar 20, 2009, at 12:56 AM, kwote uno wrote:

> it's totally cool. if it can't happen don't sweat it. i still dig the
> panels. i'd like to scale down some of your designs for my own
> personal use if you don't mind :)
>
> On Thu, Mar 19, 2009 at 8:07 AM, Scott Deyo <contact@...>
> wrote:
>> I've wanted to get into Frac, but I can't do CGS or Fritz (Elby and
>> Metalbox have dibs) and have enough trouble keeping up w/ MOTM. I
>> _want_ to, but it may take too long.
>>
>>
>> Scott Deyo
>> The Bridechamber
>> contact@...
>> http://www.bridechamber.com
>> Jealous Edison Record Kompany
>> http://www.jealousedison.com
>>
>>
>> On Mar 19, 2009, at 7:50 AM, loss1234 wrote:
>>
>>>  IF more people who use 3.5 mm (a ton of people i know use that
>>> standard) thought bridechamber sold panels in 3.5 mm, you might get
>>> more votes.
>>>
>>>  I had always thought bridechamber only did MOTM panels so i have
>>> never purchased one before.
>>>
>>>  thanks!
>>>
>>>
>
>
>
> --
> ---------------------
> http://www.kwotemusic.com
> http://www.kwotemusic.com/store.html
>
>
>

--- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...> wrote:
>
> So the Klee and MFOS seq's are finally nearing their day. My conundrum:
> I don't want to order 50 expensive panels and sell 10. So...
> How many folks are in for these sequencers?
> They are Thomas White's great oval and circle designs. Thanks Thomas!
>
> Cheers,
> Scott Deyo
> The Bridechamber
> contact@...
> http://www.bridechamber.com
> Jealous Edison Record Kompany
> http://www.jealousedison.com
>