Re: Living VCO panels? FPE templates?
2010-12-18 by wjhall11
My blurt: The Uber-LVCO 7U panel on our site is a result of our compulsive leaning toward the ridiculous. It assumes including wave-shapers (fashioned out of
Messages
Browse messages
Page 7 of 66 · 3299 messages matched
Re: Living VCO panels? FPE templates?
2010-12-18 by djbrow54
My final design is on that page. Down in the panel section is a link to various concept designs and FPE files. I did several for different potentiometers
Re: Living VCO panels? FPE templates?
2010-12-18 by Steve
Make sure you check out Dave Brown s site for this one - he s made a whole bunch of designs for this one.
Re: [ModularSynthPanels] Re: 'New' panels (YuSynth Random Gates layout)
2010-12-18 by Scott Deyo
Yes, ahead of schedule! My new metal guys are a bit more expensive, but always hit the target day or before. My old metal guys -- two weeks was often four
Re: 'New' panels (YuSynth Random Gates layout)
2010-12-18 by drryle
Great to read the brackets came in for the Random Gates. Ahead of schedule? I noticed the new layout on the Random Gates module. Is this to be shipped without
'New' panels
2010-12-17 by Scott Deyo
New layouts for Tau Pipe Phaser and CGS Tube VCA are in, as well as new stock of Oakley COTA and Ring Mod. New 4-jack bracket w/ .875 spacing for Random
Re: [ModularSynthPanels] Living VCO panels? FPE templates?
2010-12-17 by Scott Deyo
Will make one this year, early I hope... Scott Deyo contact@bridechamber.com The Bridechamber www.bridechamber.com Jealous Edison Record Kompany
Living VCO panels? FPE templates?
2010-12-17 by Eric Frampton
Besides the 7U FPE template for the Living VCO panel on Will&Bill s website, are there any other FPE templates for this floating around out there? Or any plans
Re: dotcom panel for Yusynth Random Gates module
2010-12-16 by drryle
Such unassailable logic is what makes you so potent Phil! ;^) -David
Re: dotcom panel for Yusynth Random Gates module
2010-12-15 by peng3002
... A screen printing guy a was talking to about this pointed something out to me: If you re printing onto a painted or coated metal panel you are not printing
Re: dotcom panel for Yusynth Random Gates module
2010-12-14 by drryle
Thanks Yves. I ve mailed for an RFQ. I ll probably go for a screen printed dotcom panel over the etched Moog style. I like both but the painted ones are more
Re: [ModularSynthPanels] Re: dotcom panel for Yusynth Random Gates module
2010-12-14 by yves usson
Hi David Get in touch with Ben at Synthnuts he is making panels for yusynth modules or other 5U formats for a very reasonable price.
Re: dotcom panel for Yusynth Random Gates module
2010-12-14 by drryle
I m on the same quest (sort of). I have the Random gates module kit on order and am planning to build my own panel for the dotcom 5U/MU format. So far the
Re: dotcom panel for Yusynth Random Gates module
2010-12-09 by Steve
Hey Russ - There are few if any dotcom .fpd files here, as the panels that fpe produces don t really translate into the dotcom world well. however, with a
dotcom panel for Yusynth Random Gates module
2010-12-08 by Russ
I m considering building this module in dotcom format; has anyone created an .fpd file for this yet? Thanks! Russ M.
Re: [ModularSynthPanels] Bridechamber Holiday Sale
2010-12-06 by Scott Deyo
No, sorry, not kits. I may do a sale on those in January. Right now I m just trying to sell some things I can ship very quickly. ... Scott Deyo
Re: [ModularSynthPanels] Bridechamber Holiday Sale
2010-12-04 by waveguide@earthlink.net
Does this include parts kits for YuSynth modules? -----Original Message----- From: Scott Deyo Sent: Dec 4, 2010 11:06 AM To: ModularSynthPanels@yahoogroups.com
Re: [ModularSynthPanels] Bridechamber Holiday Sale
2010-12-04 by Scott Deyo
End caps are probably January. I ran out of ching, hence the sale : ) Scott Deyo contact@bridechamber.com The Bridechamber www.bridechamber.com Jealous Edison
RE: [ModularSynthPanels] Bridechamber Holiday Sale
2010-12-04 by John L Rice
Cool, thanks Scott! Any word on when MOTM rail end caps will be back in stock? I still need 3 pairs. J John L Rice From: ModularSynthPanels@yahoogroups.com
Bridechamber Holiday Sale
2010-12-04 by Scott Deyo
FIRST EVER BRIDECHAMBER HOLIDAY SALE! USE YOUR TIME OFF TO GET SOME NEW PROJECTS ROLLIN’! UNTIL MIDNIGHT CST ON 12 DECEMBER, ALL PCBs AND PANELS ARE 10% OFF
New file uploaded to ModularSynthPanels
2010-11-17 by ModularSynthPanels@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the ModularSynthPanels group. File :
Re: [ModularSynthPanels] Re: does anyone have a Moog/dotcom dual width fpd file
2010-11-16 by Scott Deyo
I have MU panels for Bintic Filter, Wave Multipliers, Optic CV Processor, Tau Pipe Phaser, Threeler VCF -- the modules w/ white orbs next to them here:
Re: does anyone have a Moog/dotcom dual width fpd file
2010-11-15 by henfieldj
You offered MU panels? When? For which projects? I had joined this group looking for MU panels, but you only seem to work with MOTM format panels. I am
MOTM format Flight of Harmony Plague Bearer panel
2010-11-15 by david.schwan
I have uploaded an (FPD) file for my design of a Flight of Harmony Plague Bearer panel. I have also uploaded two photo s of the finished unit.
Re: [ModularSynthPanels] does anyone have a Moog/dotcom dual width fpd file
2010-11-13 by eric f
What s up w/ DotCom format? My DotCom panels didn t sell fer crap. Anyone want to tell me why? At this point I m just curious. Everyone else feel free to
Re: [ModularSynthPanels] does anyone have a Moog/dotcom dual width fpd file
2010-11-13 by Scott Deyo
Well, I still have some populated PCBs of TM1m from way back that I still owe money to Eric for, so I wouldn t expect him to want me to do it. What s up w/
Re: [ModularSynthPanels] does anyone have a Moog/dotcom dual width fpd file
2010-11-12 by eric f
Why not just have Scott make up some MOTM panels? I m in the market, though most of us MOTMers are DIY types. I ll likely not buy too much MU beyond
does anyone have a Moog/dotcom dual width fpd file
2010-11-12 by metasonix2000
I d like to offer an extra-cost 5U version of the R modules. Why not MOTM? Because the MOTM format is, sorry to tell you, dying. Even Paul isn t making any new
Re: [ModularSynthPanels] T White LPG Question
2010-10-26 by Scott Deyo
I ve noticed the same on Normal mode -- good for plinky sounds. The frequency/ offset knob affects a different range, of course. The Both mode doesn t do too
Re: [ModularSynthPanels] T White LPG Question
2010-10-25 by Rico Loverde
holy bejeezes this thing is amazing!!! never owned an LPG before, now I really see what all the hype about, so phat!!!!! (yes thats with a PH!!!!) one concern
Re: [ModularSynthPanels] T White LPG Question
2010-10-25 by Scott Deyo
Depends on whether you re doing 1U or 2U for the audio. They are similar for CV. CV: On both 1U and 2U, link IN and SUM on CV-IN. This is because you have
Re: [ModularSynthPanels] T White LPG Question
2010-10-25 by Luigi
I was curious where the heck control get s wired as well! :)
T White LPG Question
2010-10-25 by Rico
Hi guys, hope everyone is well. A couple quick questions for ya, Im building the T White Buchla LPG and using the Bridechamber panel: 1. On the panel what is
FS: A load of CNC engraved front panels (and other bits)
2010-10-23 by julianfincham
I have been going over the shelves and have a load of CNC engraved panels for sale, and some pactec pt10 cases. Some of these are graded panels, with small
Re: Allen Strange
2010-10-17 by gino wong
Putting it up on Ebay is in fact hypocrtical. It could end up getting to the $450 ABE books price. hell a vendor might do it to keep the value of his stock
Re: Allen Strange
2010-10-17 by adaaxs
You are right. The same thing occurred to me about 20 minutes later and I sold it on Friday for a $1 to young person. Gino
Re: [ModularSynthPanels] Allen Strange
2010-10-16 by Miguel Mendoza
Great book. I bought mine on Ebay for 60 USD many years ago but now there are some places to download it if you don t need to own the original. ... Great book.
Re: [ModularSynthPanels] Allen Strange
2010-10-16 by James Elliott
No offense Gino, but if you are sickened by greed you should just sell it for a fixed price on one of the many synth lists. It sounds a little hypocritical for
Allen Strange
2010-10-15 by gino wong
I am posting the Allen Strange (first trade paper ed , I think) book up on Ebay.us. Starting bid will be $10. I am sickened by high prices and greed. This is
Re: [ModularSynthPanels] The Sonic Workshop is now open...
2010-10-15 by Rico Loverde
Awesome site Todd, thank you so much for picking up where Bridechamber left off. It should benefit everone by spreading it out. rico ... -- ________________
FS: MOTM-820,830 Oakley VC-ADSR, Yusynth Random
2010-10-14 by Argitoth
(All prices lowered) All prices inlcude shipping except if outside US. If you need one, send $7 extra per cable. I will be responsible for any problems you
The Sonic Workshop is now open...
2010-10-14 by Todd
As you might have heard, Bridechamber is phasing out many of their component kits. My wife and I decided to fill the void and offer kits for the projects
Re: [ModularSynthPanels] new 5u panels
2010-10-14 by Scott Deyo
Hopefully on the next run, available by end of year. Scott Deyo contact@bridechamber.com The Bridechamber www.bridechamber.com Jealous Edison Record Kompany
Re: [ModularSynthPanels] new 5u panels
2010-10-14 by Scott Juskiw
Any news on a panel for JH scanner?
new 5u panels
2010-10-13 by Scott Deyo
Hey all, Some new panels in -- Jurgen s Freq Shifter w/ Neutrik combo jack, Magic Smoke Sheboygan VCO, Flight of Harmony Sound of Shadows VC Delay. Also,
Re: [ModularSynthPanels] Re: JPs panel Fab
2010-10-12 by here.not_here@yahoo.com
P Sent from my Verizon Wireless BlackBerry ... From: Rico Loverde Sender: ModularSynthPanels@yahoogroups.com Date: Wed, 6 Oct 2010
Re: JPs panel Fab
2010-10-10 by adaaxs
Sorry i lunched. Thanks for saving me Scott I was going to add that Jp s processes dovetail nicely into the prepunched and the oops panels from BC If you are
Minor update to JH Varislope panel
2010-10-09 by Scott Juskiw
I recently built a second JH Varislope filter and redid the panel. I m still using paper on plastic for these but lately I ve been using a laser printer on 180
Re: JPs panel Fab
2010-10-09 by Jim Coursey
Thanks Scott!
Re: [ModularSynthPanels] Re: JPs panel Fab
2010-10-08 by Scott Juskiw
... sdiy group is located here: http://dropmix.xs4all.nl/mailman/listinfo/synth-diy